Batman Card Case by rkxone

Last crawled date: 3 years ago

This series will be for playing card cases, regulation size, I have designed this to have a decorative bottom, and a logo on top, I may do dimensional logos, which would be a frame and a dimensional top you glue on. depends on the feedback. I tried to make the walls thin but not too thin, do 3+ walls in cura for strength. One hour 32 min for the bottom, 2 hour 30 min for the top of the case. .20 with 3 walls.
Design elements
bottom design with push up hole.
top has a slight lift from the base so its easier to separate
top has finger notches on the size
top has a void cut logo
both have slightly rounded edges and nice rounded corners
If there are any issues let me know. More will be coming if it's a popular thing.
Enjoy.