Basic Toilet Roll Holder with Removable Carrier Tube by potluck

Last crawled date: 3 years ago

BGRL-H03A
This is yet another (the most conventional and definitely the last) variation of the BGRL-H01A along with the BGRL-HA02A, this time with a straight-profile frame and a removable carrier tube. This is one complete STL - the holder, carrier tube, carrier tube support bar, and two roll stoppers. If required I will post separate STLs for all components.
The holder uses the same wallmount as the other BGRL-H's: The BGRLM-M01A.
Some assembly required: You will need to slot the carrier tube support bar into the carrier tube, test fit onto the holder frame - then glue or tape the support bar in place onto the carrier tube. Then snap the roll stoppers onto the completed carrier tube and adjust for your toilet roll width.
Version History:
V1 - original
Build Particulars:
Should print unsupported (primary reason I didn't do a one-piece carrier tube). STL file includes all components (bar the wall mount) which will fit onto a Makerbot 2 bed.