Base plate for leightweight Pan Tilt by Hustensaft

Last crawled date: 3 years ago

As a Twinstar FPV enthusiast I printed once the heavy duty Pan/Tilt and it worked absolut perfect. Except my servo wasn't able to turn 180°.
However I decided to use a smaler servo and really appreciate the Lightweight Pan/Tilt.
So I had to design a baseplate which fits onto the POD.
One of it is the base plate to be glued tight to the POD. On the upper base plate is the Pan servo mounted. And with only 4 screws you change the whole cam stuff and change it easily ;-)
The base was taken from this https://www.thingiverse.com/thing:906046 "MPX Twinstar FPV POD" and the Pan/Tilt contents parts of the leightweight Pan Tilt https://www.thingiverse.com/thing:2122735 and the upper camera mount is from the heavy duty mount https://www.thingiverse.com/thing:1821872.
Have fun!