Thingiverse
Baratza Vario Portaholder for 54mm Breville by MoGraphMan
by Thingiverse
Last crawled date: 3 years, 3 months ago
Remixed this to fit the 54mm Breville Portaholder used in the Barista Express, BES870XL & BES800XL, the Infuser, BES840XL, and the Duo-Temp BES810BSS.
I also redesigned it so that it loads from the bottom-up and rotate-locks into place (similar to how you would load it into the espresso machine itself). Start with one of the 3 tabs facing out to insert/release, and the handle should face straight out when locked in. This way creates much less waste and mess than the slide-in slide-out method. I also increased the width of the base so that it fits more snug into the guidelines on the Baratza Vario.
Let me know how it works for you or if you have any issues or suggestions or any other comments. It's my first real design and submission so go easy haha!
I find printing on it's back with tree supports in cura worked best at roughly 65% overhang. I also recommend fairly thick walls for the most strength.
I also redesigned it so that it loads from the bottom-up and rotate-locks into place (similar to how you would load it into the espresso machine itself). Start with one of the 3 tabs facing out to insert/release, and the handle should face straight out when locked in. This way creates much less waste and mess than the slide-in slide-out method. I also increased the width of the base so that it fits more snug into the guidelines on the Baratza Vario.
Let me know how it works for you or if you have any issues or suggestions or any other comments. It's my first real design and submission so go easy haha!
I find printing on it's back with tree supports in cura worked best at roughly 65% overhang. I also recommend fairly thick walls for the most strength.
Similar models
cults
free
Baratza Vario parametric portaholder
...y at the bottom or not (because there will still be coffee or water drips) but in the end decided to save plastic and print time.
thingiverse
free
Baratza Vario parametric portaholder by mgx
...y at the bottom or not (because there will still be coffee or water drips) but in the end decided to save plastic and print time.
thingiverse
free
Baratza Encore Delonghi portaholder by duyquang
...to delonghi iconia ec310's portaholder (old models).
i think it could fit baratza virtuoso to older delonghi portaholders too
thingiverse
free
Portaholder for Baratza Encore by EGoe
... careful: it probably only fits with the saeco aroma. i recommend you design your own version... i just wanted to share the idea.
thingiverse
free
Breville 54mm Portafilter Wall Mount by dtrevino15
...des right in and out.
just find some screws with wind nuts in the rear, and mount on any wall without studs, or however you want.
thingiverse
free
Breville 54mm Portafilter tamp stand by ian_taylor4
...ss bes870).
i use this adaptor to fit the 54mm into the breville smart grinder (used with the larger 65mm breville portafilter).
thingiverse
free
Breville 54mm Portafilter Tamp Station by hyperion917
... top: https://www.thingiverse.com/thing:4837772
for those with baratza encore grinders: https://www.thingiverse.com/thing:4766467
thingiverse
free
Breville 54mm dosing funnel for Sette 270wi by mrproduct
...print this with the large diameter of the cone down. it will only need supports with the top brackets that grip the portafilter.
thingiverse
free
Breville Razor 54mm by imakestufftv
...breville razor 54mm by imakestufftv
thingiverse
needed a replacement razor so i threw this together.
thingiverse
free
Vario Hopper 50g Mahlkönig Baratza by toni4u
...hout supports. the hopper by it self need some support.
i have uploaded two versions of the hopper. the v10 version fits tighter.
Portaholder
thingiverse
free
Baratza Encore Delonghi portaholder by duyquang
...to delonghi iconia ec310's portaholder (old models).
i think it could fit baratza virtuoso to older delonghi portaholders too
thingiverse
free
Portaholder for Baratza Encore by EGoe
... careful: it probably only fits with the saeco aroma. i recommend you design your own version... i just wanted to share the idea.
thingiverse
free
Espresso portaholder funnel - 58mm by ewindisch
...of brass and other pieces in the feed path such as filament tubes and cold-ends may also contain lead and other toxic substances.
thingiverse
free
Baratza Vario parametric portaholder by mgx
...y at the bottom or not (because there will still be coffee or water drips) but in the end decided to save plastic and print time.
thingiverse
free
Espresso knockbox coffee can by ewindisch
...there is no shock absorption, this could damage your portaholder or filter baskets. so far, i haven't noticed any...
cults
free
Baratza Vario parametric portaholder
...y at the bottom or not (because there will still be coffee or water drips) but in the end decided to save plastic and print time.
Baratza
thingiverse
free
Baratza Encore Burr Holder by johnyz
...za encore burr holder by johnyz
thingiverse
3d printable model of replacement burr holder for baratza encore coffee bean grinder
thingiverse
free
Baratza Encore Delonghi portaholder by duyquang
...to delonghi iconia ec310's portaholder (old models).
i think it could fit baratza virtuoso to older delonghi portaholders too
thingiverse
free
Baratza Vario Grinder Wrench by Tuffdante
...e the upper burr of the baratza vario grinder. i printed mine in pla with 30% infill and it has held up fine after repeated uses.
thingiverse
free
Hopper Lid for Baratza Sette Series by takman29
...9
thingiverse
just designed a hopper lid for baratza sette series grinder.
i printed with wood pla to match my espresso machine.
thingiverse
free
Portaholder for Baratza Encore by EGoe
... careful: it probably only fits with the saeco aroma. i recommend you design your own version... i just wanted to share the idea.
thingiverse
free
Baratza Virtuoso Single Dose Hopper by tommydadog
...he pop corning at the end of the grind.
this should fit some of the other baratza grinders like the encore but i have not tested.
thingiverse
free
Baratza Preciso coffee grinder knob
...ok at to model the new one, so i went by pictures and memory. it took me a few revisions, but ended up with something excellent.
thingiverse
free
Baratza Encore Rubber Funnel Insert by leklheklel
...ncore. printed with plaflex however you will need to do your own research on flexible filament and its suitability for this part.
thingiverse
free
Baratza Encore handle, Aeropress scoop slot by barumonkey
... encore coffee grinder's dial...
...with a hole for the aeropress scoop, which can act as a (very satisfying kerchunk) lever!
thingiverse
free
Baratza Encore / Single Dose Hopper by clypp
... cup was printed in tpu and the hopper in pla. the hopper is a multi-part so the dial marker can be printed in a different color.
Breville
design_connected
$21
BREVILLE Citrus Press
...breville citrus press
designconnected
breville citrus press computer generated 3d model.
3ddd
$1
Breville Barista Express BES870XL/ BES870CBXL
...ет. в архиве есть файлы max/ fbx/ mat. все текстуры и материалы имеют индивидуальное имя на английском языке.
приятных рендеров!
thingiverse
free
Breville by sammywhiskas
...breville by sammywhiskas
thingiverse
crude replacement catch, but does the job.
thingiverse
free
Breville 54mm Portafilter tamp stand by ian_taylor4
...ss bes870).
i use this adaptor to fit the 54mm into the breville smart grinder (used with the larger 65mm breville portafilter).
thingiverse
free
Breville Steam Lever by masterross
...press
the objects are not printing orienteted!
check images how should they be.
the lever is printed with custom support 20x20x10
thingiverse
free
Breville coffee distributor organizer by xenonz
...breville coffee distributor organizer by xenonz
thingiverse
breville coffee distributor 53mm organizer with razor support.
thingiverse
free
Breville Barista Express 860XL water float
...the breville barista express 860xl espresso machine. the side docking pins broke on mine and breville have discontinued the part.
thingiverse
free
Breville - 51.7mm Coffee Tamper by DiaLFonZo
...mm coffee tamper by dialfonzo
thingiverse
i did that for my breville cafe roma espresso machine.
made to fit the stock basket.
thingiverse
free
54mm Dosing cup for Breville Barista Express by babaNmama
...54mm dosing cup for breville barista express by babanmama
thingiverse
breville 54mm dosing cup
thingiverse
free
Breville Toaster Oven Hook by rajrat
...ajrat
thingiverse
use this hook to pull/push a hot toaster oven grate. stores conveniently on your breville toaster oven handle.
54Mm
3d_export
$19
Pancakes on Frying Pan
...5 edges: 0<br>object:<br>- dimension mm: 416mm x 250mm x 54mmlt;br>- dimension cm: 41.6cm x 25cm x 5.4cm<br>- dimension m:...
thingiverse
free
cnc dush shoe 54mm
...cnc dush shoe 54mm
thingiverse
dust shoe for 54mm router
thingiverse
free
Laptop 54mm fan case by stinguc
...laptop 54mm fan case by stinguc
thingiverse
case for a 54mm laptop fan
thingiverse
free
Biesse vacuum suction cup 54mm
...biesse vacuum suction cup 54mm
thingiverse
biesse vacuum suction cups 54mm
thingiverse
free
Cap Rack Hole 54mm by thiiks
...cap rack hole 54mm by thiiks
thingiverse
cap to a 54mm hole in a 1mm metal sheet
thingiverse
free
54mm Dosing Cup by Gaetano_print
...remix(source: thing:4288531)
main difference is the smaller size with a total height of 60mm.
more pictures will follow soon.....
thingiverse
free
Filament Holder 54mm by Heiden
...pool holder for 54mm inner diameter spools.
outer diameter is 55mm
inner diameter is 8.5mm
if you need other sizes let me know ;)
thingiverse
free
Lexus Center Cap (54mm) by Thanatophobia
...nter cap (54mm) by thanatophobia
thingiverse
54mm lexus centre wheel cap. for use on 350z/370z oem wheels.
print in petg/abs/asa
thingiverse
free
Blast Gate 50mm / 54mm
...blast gate 50mm / 54mm
thingiverse
for 3d print or wood (cnc)
thingiverse
free
Pipe Cylinder 54mm x 97mm by kjamimate
...pipe cylinder 54mm x 97mm by kjamimate
thingiverse
this is a pipe cylinder 54mm x 97mm i made for a project.
Vario
design_connected
$11
Vario
...vario
designconnected
otono design vario computer generated 3d model. designed by herbst, sebastian.
3ddd
$1
Vario Long
...io long
размер: 1700 x 750 мм
h = 625 мм
объём: 220 л
ссылкаhttp://paa.com.ua/ru/produkciya/vario-long
3ddd
$1
Vario Grande
...rande
размер: 1850 x 800 мм
h = 640 мм
объём: 240 л
ссылкаhttp://paa.com.ua/ru/produkciya/vario-grande
3ddd
$1
PAA VARIO LONG2
...aa , vario
paa vario long2http://www.paabaths.com/en/products/vario-long/about
3ddd
$1
PAA VARIO LONG3
...aa , vario
paa vario long3http://www.paabaths.com/en/products/vario-long/about
3ddd
free
Paa Vario
...paa vario
3ddd
paa
paa variohttp://www.paa.lv/ru/produkciya/vario-2
габариты: 650х510х150(h)
polys: 9893
3ddd
$1
PAA / Vario round
...rio round
3ddd
paa , ванна , латвия
vario round
3ddd
$1
PAA / Vario long
...vario long
3ddd
paa , ванна , латвия
vario long
3ddd
$1
excite+ vario
...excite+ vario
3ddd
тренажер
элипсоид
3ddd
$1
SILVA Vario PP11876-RT
...silva vario pp11876-rt
3ddd
silva , vario
silva vario pp11876-rt