Thingiverse
Ball Lock Puzzle by ricswika
by Thingiverse
Last crawled date: 3 years ago
Here's an amusing little puzzle I'm sure you never saw before because I just invented it. I've been calling it the z=xy puzzle; read on to find out why. It is a more complex version of my 2 piece cube puzzle, but now including a magic ball lock. It is part puzzle, part magic trick, part math lesson. The theory that makes it work comes from pure mathematics. Once the cube is closed and locked by rotating the ball, the cube is held closed by invisible mathematical forces. Normally, a sphere would not be retained in a hemispherical cavity, but not in this case. What gives?
You start with the cube in two halves, each side holding half of a ball. Show your victim, I mean the audience, the inside of the cube and point out how the inside surfaces are all smooth with no overhangs to hold the cube together. Slide the cube halves all the way together to form a solid cube and then apart again to demonstrate that the cube opens and closes freely. Now close the cube and hand it to an audience member with instructions to pull it apart. They can't.
The Secrets
There are two secrets, 1) secretely rotate the ball from the back side of the cube as you hand it to the audience member: this locks the cube shut, 2) invisibility flick the cube itself 180 degrees from the position you held it in when you opened it. Combine 1) and 2) into one motion as you hand it over. The unsuspecting audience member will try to pull the cube open just like you did but won't be able to because they will be pulling the pieces closed, not open, after the rotation. If they they figure that out, the cube will still not open because the ball lock holds it shut unless they rotate the ball to the correct orientation on two axis' and pull on the correct cube faces.
How it Works
There are two facts that make it work. 1) The ball is bisected symmetrically, but in a special way (z=xy) that only allows the halves to be separated exactly on one axis. 2) The profile of the hemisphere viewed from the pole is non-circular, counter intuitively so, thus leading to a paradox in the mind of the audience. Each hemisphere locks into the socket on the opposite side of the cube unless it is rotated in the correct direction. The combination of these two facts means that the cube will only open when the ball separation axis is lined up with the cube separation axis, and the ball is rotated in the one direction where it will release from the socket on the opposite side.
The z=xy Puzzle
Some of you may have noticed that the cool saddle like surface bisecting the sphere is a hyperbolic paraboloid, z=xy. Here is a wonderful practical application of something you learned about in school. Who knew? Applied mathematics meets 3d printing.
Printing
I've provided the complete puzzle in one file so if you are printing in one color, use that file. I've also provided the pieces in separate files, so you can easily print each piece in a different color. UPDATE: At raver1975's request, I've added another version of the ball with a hollow core, so you can hide something inside.
Print at 0.2 mm layer, with support (required for the ball only). Make sure to use pleanty of fan so the overhangs on the bottom of the ball come out smooth. You may need to take some sandpaper and round out the bottom if it doesn't come out perfectly round. The outside of the ball needs to be smooth and perfectly spherical so it turns freely inside the housing.
Assembly
The hemispheres must be inserted into the housing properly for the puzzle to work. Insert the hemispheres with the saddle high side pointed towards the open sides of the housing, then rotate 90 degrees so the saddle low points are now towards the open sides of the housing. This is the default UNLOCKED position and is the only position where the cube will go together or come apart. Slide the two puzzle haves together with them rotated 90 degrees out of phase. Any rotation of the ball will lock the puzzle, so take a close look before you move it. You can tell where it goes by looking closely at the layer lines on the ball. Once you move the ball, you'll have to put it back in the exact same position (or rotated by 180 degress) to open the puzzle.
Get it on Shapeways
If you'd like to have one if these puzzles, but don't have a 3d printer yet or would like one made in metal, I have them available on Shapeways at my cost https://www.shapeways.com/product/LAL3MW5A6/ball-lock-puzzle?optionId=58544418 . Note, the shapeways model has been modified to meet their minimum wall thickness requirement, so looks a little different, but uses the same idea. You'll need to order two if you get it from shapeways, since it is only half the puzzle. On the plus side, you can get each side in its own color. The home print version actually has tighter seams, but in plastic you can force it open.
You start with the cube in two halves, each side holding half of a ball. Show your victim, I mean the audience, the inside of the cube and point out how the inside surfaces are all smooth with no overhangs to hold the cube together. Slide the cube halves all the way together to form a solid cube and then apart again to demonstrate that the cube opens and closes freely. Now close the cube and hand it to an audience member with instructions to pull it apart. They can't.
The Secrets
There are two secrets, 1) secretely rotate the ball from the back side of the cube as you hand it to the audience member: this locks the cube shut, 2) invisibility flick the cube itself 180 degrees from the position you held it in when you opened it. Combine 1) and 2) into one motion as you hand it over. The unsuspecting audience member will try to pull the cube open just like you did but won't be able to because they will be pulling the pieces closed, not open, after the rotation. If they they figure that out, the cube will still not open because the ball lock holds it shut unless they rotate the ball to the correct orientation on two axis' and pull on the correct cube faces.
How it Works
There are two facts that make it work. 1) The ball is bisected symmetrically, but in a special way (z=xy) that only allows the halves to be separated exactly on one axis. 2) The profile of the hemisphere viewed from the pole is non-circular, counter intuitively so, thus leading to a paradox in the mind of the audience. Each hemisphere locks into the socket on the opposite side of the cube unless it is rotated in the correct direction. The combination of these two facts means that the cube will only open when the ball separation axis is lined up with the cube separation axis, and the ball is rotated in the one direction where it will release from the socket on the opposite side.
The z=xy Puzzle
Some of you may have noticed that the cool saddle like surface bisecting the sphere is a hyperbolic paraboloid, z=xy. Here is a wonderful practical application of something you learned about in school. Who knew? Applied mathematics meets 3d printing.
Printing
I've provided the complete puzzle in one file so if you are printing in one color, use that file. I've also provided the pieces in separate files, so you can easily print each piece in a different color. UPDATE: At raver1975's request, I've added another version of the ball with a hollow core, so you can hide something inside.
Print at 0.2 mm layer, with support (required for the ball only). Make sure to use pleanty of fan so the overhangs on the bottom of the ball come out smooth. You may need to take some sandpaper and round out the bottom if it doesn't come out perfectly round. The outside of the ball needs to be smooth and perfectly spherical so it turns freely inside the housing.
Assembly
The hemispheres must be inserted into the housing properly for the puzzle to work. Insert the hemispheres with the saddle high side pointed towards the open sides of the housing, then rotate 90 degrees so the saddle low points are now towards the open sides of the housing. This is the default UNLOCKED position and is the only position where the cube will go together or come apart. Slide the two puzzle haves together with them rotated 90 degrees out of phase. Any rotation of the ball will lock the puzzle, so take a close look before you move it. You can tell where it goes by looking closely at the layer lines on the ball. Once you move the ball, you'll have to put it back in the exact same position (or rotated by 180 degress) to open the puzzle.
Get it on Shapeways
If you'd like to have one if these puzzles, but don't have a 3d printer yet or would like one made in metal, I have them available on Shapeways at my cost https://www.shapeways.com/product/LAL3MW5A6/ball-lock-puzzle?optionId=58544418 . Note, the shapeways model has been modified to meet their minimum wall thickness requirement, so looks a little different, but uses the same idea. You'll need to order two if you get it from shapeways, since it is only half the puzzle. On the plus side, you can get each side in its own color. The home print version actually has tighter seams, but in plastic you can force it open.
Similar models
thingiverse
free
The Secret Box by hobbymaker
...ull them back in place. closed noone can see how to open this box only if you know it.
if you make one please show it to us ^.^
thingiverse
free
Display Base for Puzzle Cube by greenstreak
...ed open or closed. the two styles aren't far off from each other but the circular base on one isn't as tall as the other.
grabcad
free
Puzzle Box ( The Golden Compass )
...ter that you will be able to turn the pin to open the compass ( the red moon will be open ).
i hope you like it :)) :)
enjoy ...
thingiverse
free
Impossible Dove Tail Puzzle Box by cnorth
... a very heavily ornate version. i'm not sure how easy the ornate version will be to print, but i've included it anyways.
thingiverse
free
box puzzle by cyanul
...e off one by one until you can open it.
i have not yet printed it so i don't know wether it works or not. (though it should).
thingiverse
free
Puzzle Cube Holder by Wooden_Fish
...place your cube into it. it acts as a great display stand, and also helps to hold your cube together and out of harm's reach.
thingiverse
free
Impossible Dovetail Puzzlebox Improved by Geowulfie
...switching between metric and imperial units, that's just how they size magnets and ball bearings when you buy them on amazon
thingiverse
free
B&D Firmadoor Lock Guide by knottyau75
...s a complete pain to lock. i pulled out the one remaining one and copied it so i could lock the door again. this is the result.
3dwarehouse
free
Rubiks Cube for SketchUp 6
...click on the middle of the diagonal, of course). rotate at will. have fun. #ack #cube #puzzle #rubik #rubiks #sketchup_6 #working
thingiverse
free
bike lock bracket under saddle
...of the bracket. the bracket is suitable for locks similar to the one shown in the pictures. to mount...
Ricswika
thingiverse
free
XYZ Puzzle by ricswika
...ctures for solution.
including scad source for hole tolerance adjustment, animated assembly and 3d printer build plate display.
thingiverse
free
9/11 Tribute Paper Weight by ricswika
...e paper weight by ricswika
thingiverse
a 9/11 tribute as a paper-weight. print in up to 100% infill for weight. scale as needed.
thingiverse
free
9/11 Tribute Book Ends by ricswika
...1 in bookends. print at 30% or higher infill for weight. scale as needed.
photos show 75% scale. for books, 150% scale or higher.
thingiverse
free
Easter Egg Maker for Customizer by ricswika
...et shapes.
easy to customize by adjusting just a few parameters.
offers hollow and bisect options for better faster printing.
thingiverse
free
Star 6 Puzzle by ricswika
...="0" allowfullscreen="allowfullscreen"
star 6 puzzle solution animation
by ricswika
on sketchfab
thingiverse
free
Twisted Rose Vase by ricswika
...the vase and planter competition now running, so if you like it, please consider downloading or buying a copy from there. thanks.
thingiverse
free
Exploded T-Rex Skull by ricswika
...se and discuss.
files include adjustable t-rex hinges designed for 3d printing, the sectioned t-rex skull, and a modified base.
thingiverse
free
Gazebo 3 Axis Poll Joint Replacement by ricswika
...poll joint corner for a small gazebo or garden tent. a thin tear-off raft keeps the part flat during printing to prevent warping.
thingiverse
free
Zombie Friends by ricswika
... own life and the lives of countless others. do not hesitate and act swiftly.
print without support!
https://youtu.be/xw5a_8ghk4u
thingiverse
free
Ice Scraper with Poll Extension by ricswika
... each printable poll extension adds about 170mm (6.7") to the handle length of your ice scraper, paint roller, mop or broom.
Puzzle
3d_ocean
$5
Puzzle
... can rotate, move or delete them easily. to change the puzzle image just replace the ‘puzzle_texture.jpg’ in the textures folder.
archibase_planet
free
Puzzle
...puzzle
archibase planet
puzzle toy enigma
puzzle n240111 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$10
puzzle
...puzzle
3dexport
this puzzle model consists of separate parts. suitable for 3d printing and further play.
3ddd
$1
pillow-puzzle
... пазлы , пазл , подушка
pillow-puzzle
3ddd
$1
Porada Puzzle
... журнальный , кофейный
стол журнальный porada puzzle 1000х500
3ddd
$1
Puzzle sofa
...puzzle sofa
3ddd
модульный
puzzle sofa
turbosquid
$35
Puzzle
...uid
royalty free 3d model puzzle for download as 3ds and max on turbosquid: 3d models for games, architecture, videos. (1300379)
turbosquid
free
puzzle pegboard with square and triangle puzzle
... pegboard with square and triangle puzzle for download as max on turbosquid: 3d models for games, architecture, videos. (1634635)
3d_ocean
$4
Puzzle Cube
...puzzle cube
3docean
clean cube fun puzzle rubik simple toy
this is a very clean and simple puzzle cube.
turbosquid
$19
puzzle
...oyalty free 3d model puzzle for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1363319)
Lock
turbosquid
$1
Lock
...ck
turbosquid
royalty free 3d model lock for download as fbx on turbosquid: 3d models for games, architecture, videos. (1286851)
3d_export
$5
lock handle
...lock handle
3dexport
lock handle
3d_export
$5
hinged lock
...hinged lock
3dexport
hinged lock
turbosquid
$1
Lock Box with combination lock
...ee 3d model lock box for download as 3ds, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1215494)
turbosquid
$2
Lock
...
royalty free 3d model lock for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1452660)
turbosquid
$35
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$24
lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Lock
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Ball
turbosquid
$5
Ball on a Ball
...uid
royalty free 3d model ball on a ball for download as obj on turbosquid: 3d models for games, architecture, videos. (1484719)
archibase_planet
free
Ball
...ball
archibase planet
ball golf ball
ball - 3d model (*.gsm+*.3ds) for 3d visualization.
3d_export
$5
ball
...ball
3dexport
ball
archibase_planet
free
Ball
...ball
archibase planet
ball football soccer ball
ball n100714 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_export
$5
ball
...ball
3dexport
soccer ball
archibase_planet
free
Ball
...ball
archibase planet
ball football
ball n100914 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
3d_ocean
$5
Snooker Balls
... set balls snooker snooker balls white ball yellow ball
set snooker balls format include : .c4d .3ds .obj build in cinema 4d r13
3d_export
free
ball
...ball
3dexport
this is 3d model ball's
3d_ocean
$2
Soccer Ball
...soccer ball
3docean
ball red and yellow ball red ball soccer ball
a gorgeous red and yellow seamless soccer ball
3d_ocean
$5
Billard Balls
...low poly billiard balls. numbering from 1 to 15 plus the cue ball. each of the balls excluding the cue ball has a 4k texture map.