Thingiverse
Ball-Bearing Spool Support with Adjustable Clip by billbo1958
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is a spool holder and spool clip that I designed for my Flying Bear P902 printer, but it should work on just about any printer that is made with 2020 aluminum extrusions. The size of the spool barrel is 30 mm dia. x 90 mm long. It should be able to support most (if not all) existing filament spools. The clip assembly is designed to slide up and down on the 2020 extrusion so that it can be positioned right on the edge of the spool flange. It will stop the spool from moving along the barrel, and it should also prevent filament from wandering between the spool flange and the 2020 extrusion.
You will need to print the following items for this assembly:
One Shaft Barrel (print with the larger-chamfered end up).
One Shaft Support Block (print with the u-shaped opening pointed up).
Two Bearing Spacers.
One Spool Wedge (print with the longer narrow side down.).
Two Wedge Clip Plates.
None of these parts will require supports. (I printed mine with 0.2mm layers and 20% fill.) Also, if you wish to attach the spool holder to the opposite side of the 2020 extrusion that is shown in the photographs, you should 'mirror' the spool wedge in your slicer program before you print it.
You will need the following hardware for this assembly:
Two 608ZZ skateboard bearings (to be inserted into both ends of the shaft barrel).
Either one M8 x 100 mm hex bolt or one 5/16-18 x 4" hex bolt (to support the shaft barrel).
Either one M8 nylon insert hex nut or one 5/16-18 nylon insert hex nut (for the end of the hex bolt).
Two M4 x 20 mm button-head socket cap screws with washers (to attach the shaft support block to the 2020 extrusion).
Two M4 t-nuts for 2020 aluminum extrusions (to attach the shaft support block to the 2020 extrusion).
Four M3.5 x 13mm or #6 x 1/2 in. Phillips pan-head sheet metal screws (to attach the wedge clip plates to the sides of the spool wedge).
I believe the photographs do a fair job of showing how the parts fit together. Since the shaft barrel has a split in it, you should be able to insert the bearings into the barrel by hand. (Also, you should not have to do any fancy calibration when printing the barrel diameter, since it can spring open to accommodate the ball bearings.) The spacers go on either side of the bearings as shown in the photos. The nylon-insert nut only needs to be screwed onto the bolt until the outer face of the nut is aligned with the end of the bolt. It is not intended to be tightened against the bearings. When the barrel assembly with the support bolt, spacers, and lock-nut is clamped to the 2020 extrusion, the axial position of the bolt can be adjusted so that there is only a slight amount of axial play in the bearings. When a spool is placed on the spool barrel, the spool clip assembly should be slid upward until it contacts or is very near to the spool flange.
I hope that the Thingiverse community finds this Thing useful. If you have any questions about this Thing, please post them in the comments and I will do my best to answer them.
You will need to print the following items for this assembly:
One Shaft Barrel (print with the larger-chamfered end up).
One Shaft Support Block (print with the u-shaped opening pointed up).
Two Bearing Spacers.
One Spool Wedge (print with the longer narrow side down.).
Two Wedge Clip Plates.
None of these parts will require supports. (I printed mine with 0.2mm layers and 20% fill.) Also, if you wish to attach the spool holder to the opposite side of the 2020 extrusion that is shown in the photographs, you should 'mirror' the spool wedge in your slicer program before you print it.
You will need the following hardware for this assembly:
Two 608ZZ skateboard bearings (to be inserted into both ends of the shaft barrel).
Either one M8 x 100 mm hex bolt or one 5/16-18 x 4" hex bolt (to support the shaft barrel).
Either one M8 nylon insert hex nut or one 5/16-18 nylon insert hex nut (for the end of the hex bolt).
Two M4 x 20 mm button-head socket cap screws with washers (to attach the shaft support block to the 2020 extrusion).
Two M4 t-nuts for 2020 aluminum extrusions (to attach the shaft support block to the 2020 extrusion).
Four M3.5 x 13mm or #6 x 1/2 in. Phillips pan-head sheet metal screws (to attach the wedge clip plates to the sides of the spool wedge).
I believe the photographs do a fair job of showing how the parts fit together. Since the shaft barrel has a split in it, you should be able to insert the bearings into the barrel by hand. (Also, you should not have to do any fancy calibration when printing the barrel diameter, since it can spring open to accommodate the ball bearings.) The spacers go on either side of the bearings as shown in the photos. The nylon-insert nut only needs to be screwed onto the bolt until the outer face of the nut is aligned with the end of the bolt. It is not intended to be tightened against the bearings. When the barrel assembly with the support bolt, spacers, and lock-nut is clamped to the 2020 extrusion, the axial position of the bolt can be adjusted so that there is only a slight amount of axial play in the bearings. When a spool is placed on the spool barrel, the spool clip assembly should be slid upward until it contacts or is very near to the spool flange.
I hope that the Thingiverse community finds this Thing useful. If you have any questions about this Thing, please post them in the comments and I will do my best to answer them.
Similar models
thingiverse
free
Ball Bearing Spool Holder for Monoprice Select Mini (Malyan M200) by andymandias
...so a little bit of force may be required. similary, push a 608 bearing into the opposite side of...
thingiverse
free
Ball Bearing Spool Holder for Monoprice Maker Ultimate (Wanhao Duplicator 6) by andymandias
...so a little bit of force may be required. similary, push a 608 bearing into the opposite side of...
thingiverse
free
2020 Delta bed retainer clip by joochung
... be positioned far enough away from an heated bed to allow for pla to be used to print it. otherwise go for petg, abs, or ht pla.
thingiverse
free
Ender 3 Universal Spool Holder by SapuSeven
...use the two m5 bolts and t-slot nuts from the original spool holder to attach the new holders on the top in place of the old one.
thingiverse
free
YASH - Yet another spoolholder (8mm rod) by tpra
...s, should be ok.
if you don't have a ball ended hex wrench : print 1 short clip and 1 long clip, lock the short clip first.
thingiverse
free
Anycubic Plus HDD Bearing Top Spool Holder by streamarcanine
...usion with m4x12mm (3x) nuts and bolts. the support brakets are ajustable and uses m3x14mm (6x) screws to mount to the main base.
thingiverse
free
FolgerTech 2020 Y Axis Idler Bearing Holder by JWag
...er over the bolt and thread on the nylock
attach the holder to the 2020 frame with m5 bolts and t-nuts.
tension your y-axis belt.
thingiverse
free
2020 Hinge Corner by walter
...
printer:
-- eustathios
filaments: (full list can be found on thrinter)
-- atomic filament transparent orange pla
*affiliate link
thingiverse
free
Folgertech FT-5 R2 Assembly Aids by StvPtrsn
...ossbars made it much easier than using the spool holder as a spacer. the stl should be both parts in one so just print one pair.
thingiverse
free
Snap together filament spool support by mdpminc
...m flange od and up.
two assemblies required (one for each flange)
bearing 608zz bearings or any round 8 id x 22od x up to 7 thick
Billbo1958
thingiverse
free
FlyingBear P902 Nameplate by billbo1958
...with a proper nameplate. to correct this grievous error on the part of the manufacturer, i have taken it on myself to create one.
thingiverse
free
Chihuahua Badge by billbo1958
...t of english.
so, if you have a chihuahua, or if you are a fan of them, proudly show all your friends the powah of the chiwahwah!
thingiverse
free
Spool Clip by billbo1958
...ing:2211078). however, i thought that i would post this clip because it is very simple, and perhaps others might find it useful.
thingiverse
free
Tall Fluted Vases by billbo1958
...can probably make some very interesting shapes with these files by using a different scale factors in the z, x, and y directions.
thingiverse
free
Tall Faceted Vases by billbo1958
...can probably make some very interesting shapes with these files by using a different scale factors in the z, x, and y directions.
thingiverse
free
Mosaic Lamp by billbo1958
...you enjoy this design. if you have any questions about it, please put them in the comments and i will do my best to answer them.
thingiverse
free
Spiral Fluted Bowls by billbo1958
... reduce them in size.
if you have any questions about these two bowls, post them in the comments and i will do my best to answer.
thingiverse
free
Olla by thingscosas
...olla by thingscosas thingiverse remix from: bol by usuario: billbo1958 (abril 06, 2017) faceted bowl and vase...
thingiverse
free
Multi-Lampshade Bouquet by billbo1958
...maker's muse for giving me the inspiration for this design, and cnc kitchen for showing me how to make threads in fusion 360.
thingiverse
free
Faceted Bowl and Vase by billbo1958
...oday.
if anyone has any questions about either of these things, please post them in the comments and i will do my best to answer.
Ball
thingiverse
free
ball in ball in ball in ball by Syzguru11
...ww.thingiverse.com/syzguru11/collections/balls
(donations appreciated, but not necessary. my things are free and will always be).
thingiverse
free
Ball in Ball by PatrickSalvador
...ball in ball by patricksalvador
thingiverse
ball in ball
thingiverse
free
ball in a ball in a ball in a ball by Simon_Vance
...in a ball by simon_vance
thingiverse
i just put together a random thing because i was bored and it was just a 20 minute project.
thingiverse
free
Ball in a ball by zakw
...ball in a ball by zakw
thingiverse
ball within a ball
thingiverse
free
Ball in Ball by DevinWilcox
... by devinwilcox
thingiverse
break ball loose and enjoy!
big thanks to gkewley for the picture of the white printed ball in ball.
thingiverse
free
Ball in a Ball in a Ball - by Flightcache by Flightcache
...lls.
2015 | printed the ball in ball in ball with my mendel 90 with support sliced with slic3r and it is working fine. 50% size
thingiverse
free
ball in ball 2020
...://www.thingiverse.com/thing:2754149
also check out my oyher ball designshttps://www.thingiverse.com/syzguru11/collections/balls
thingiverse
free
Ball for ball bearing by Quanrbit
...l bearing by quanrbit
thingiverse
this remix is designed for single balls in ball bearings
7.3mm/0.287" diameter
using brim
thingiverse
free
twisted ball in ball in ba.... by Syzguru11
...twisted ball in ball in ba.... by syzguru11
thingiverse
twisted ball in ball in ba....
thingiverse
free
twisted ball in ball in ba.... by Syzguru11
...twisted ball in ball in ba.... by syzguru11
thingiverse
twisted ball in ball in ba....
Spool
thingiverse
free
Spool Support For Anycubic Spool Holder and AMZ3D Spools by Kobaratsu
... amz3d spools by kobaratsu
thingiverse
spool axis support to avoid jerks on spool, using anycubic spool holder and amz3d spools
thingiverse
free
Spool adapter for Warhorse spool
...spool adapter for warhorse spool
thingiverse
a simple spool adapter to use abs warhorse spool with a 72 mm hole diameter.
thingiverse
free
Spool holder for 1KG Spools by angkor
...spool holder for 1kg spools by angkor
thingiverse
spool holder for 1kg spools
thingiverse
free
Spool holder
...spool holder
thingiverse
i use this spool holder for up to 1kg spools and should fit all spools.
thingiverse
free
Spool assembler
... empty spool with this spool assembler
just cut an empty spool in half , put your filament and assemble with this spool assembler
thingiverse
free
Small Spool and Spool Stand by Beckman13
...ool holder are meant for 50 gram flexible filaments. the two sides of the spool holder are meant to slide together and interlock.
thingiverse
free
spool spindle cap for 25mm spools by Seadevil
...spool spindle cap for 25mm spools by seadevil
thingiverse
spool spindle cap for 25mm spools
thingiverse
free
spool ! by St0rmingBr4in
...spool ! by st0rmingbr4in
thingiverse
this is a spool !
thingiverse
free
Spool Holder for large spools by dmonkey
...y
thingiverse
a spool holder that you can attach to the back of a makerbot replicator that can hold large filament spools (1kg)
thingiverse
free
Spool roll
...spool roll
thingiverse
spool roll
Bearing
thingiverse
free
bearing
...bearing
thingiverse
just a bearing i made for fun
thingiverse
free
Bear
...bear
thingiverse
bear i made in tinkercad to see if i could
thingiverse
free
Brown Bear, Brown Bear by morganglass
...brown bear, brown bear by morganglass
thingiverse
brown bear, brown bear
thingiverse
free
care bears sunshine bear by johnboyjr
...care bears sunshine bear by johnboyjr
thingiverse
care bear sunshine bear
thingiverse
free
Bearing by mskokondo
...bearing by mskokondo
thingiverse
working bearing with bearing balls.
thingiverse
free
Bear mom and bear babyV2 by AlexStormND
...com/en/3d-model/art/bear-mom-and-bear-babyv3
bear mom and bear babyv4https://cults3d.com/en/3d-model/art/bear-mom-and-bear-babyv4
thingiverse
free
Bear mom and bear baby by AlexStormND
...om and bear baby by alexstormnd
thingiverse
bear mom and bear baby, you can see my other sculptures at https://t.me/alexstormnd
thingiverse
free
bearing by isaacdrais
...bearing by isaacdrais
thingiverse
bearing
thingiverse
free
Bearings by The_LAB
...bearings by the_lab
thingiverse
bearings
thingiverse
free
Bearing by milad64
...bearing by milad64
thingiverse
bearing
Adjustable
thingiverse
free
Adjustable Wrench
...adjustable wrench
thingiverse
working adjustable hand wrench.
thingiverse
free
PPG adjustable propellers adjusting device by x3x3x
...ppg) adjustable propellers adjusting device. 95 mm blade width. android phone, apple, symbian os. applications for free download.
thingiverse
free
Adjustable foot
...adjustable foot
thingiverse
just another adjustable foot for m5 screw (better if is self-locking nut).
diameter 20mm
thingiverse
free
Adjustment Handle by adamdthornton
...adjustment handle by adamdthornton
thingiverse
adjustment handle
thingiverse
free
Adjustable foot by denis4
...adjustable foot by denis4
thingiverse
adjustable leg
thingiverse
free
Adjustable Extruded by CruiseLee
...adjustable extruded by cruiselee
thingiverse
adjustable extruded
thingiverse
free
adjustable spanner by stevehaines
...adjustable spanner by stevehaines
thingiverse
adjustable spanner
thingiverse
free
Adjustable Wrench by AdamsLab
...h by adamslab
thingiverse
this is an adjustable wrench.
the top jaws slide into the main body, and you use the nut to adjust it.
thingiverse
free
Lawnmower adjustment handle
...lawnmower adjustment handle
thingiverse
lawnmower adjustment handle
thingiverse
free
Adjustable Frame by Quinventor
...adjustable frame by quinventor
thingiverse
an adjustable picture frame
Clip
thingiverse
free
Clip
...clip
thingiverse
clip.
thingiverse
free
Meta Clips: Parametric Round Clips... with a clip! by hugomatic
...meta clips: parametric round clips... with a clip! by hugomatic
thingiverse
sometimes your clips need clipping too.
thingiverse
free
clip
...clip
thingiverse
clip for screen door screen install
thingiverse
free
SanDisk Clip Zip Clip by inflam52
...sandisk clip zip clip by inflam52
thingiverse
sandisk clip zip clip
thingiverse
free
Desk clip cable clip by Kexei
...desk clip cable clip by kexei
thingiverse
clip this on a side of your desk to clip cables
thingiverse
free
Sansa Clip Clip by BrayChristopher
...r up the volume controls, but the screen and the front buttons are still accessible.
i also uploaded some of my earlier concepts.
thingiverse
free
Sansa Clip clip by Pr0nboy
...nk it is functional. this was designed for the original sansa clip, i don't know whether this will work with the clip+ series
thingiverse
free
Clip
...clip
thingiverse
this clip helps mark where a child's height is on a tape measure.
thingiverse
free
CLIP
...clip
thingiverse
.
thingiverse
free
Clip for SanDisk Sansa Clip+ by oet
...clip for sandisk sansa clip+ by oet
thingiverse
i broke the clip on my sansa clip+ mp3 player so i created a new one.
Support
thingiverse
free
Support filament support by capucinois
...support filament support by capucinois
thingiverse
simple filament support / un support simple pour filament
thingiverse
free
Support rasoir
...support rasoir
thingiverse
support for shaver
support pour rasoir
thingiverse
free
Support for Honor 8 + Support by ZedEau
...y zedeau
thingiverse
support for honor 8 with a support for a car with a coin holder like this onehttp://i.imgur.com/belww0z.jpg
thingiverse
free
Gutter support
...ists and locks into a corresponding track on the conservatory then standard cutter supports drop into the recess on this support.
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
SUPPORT by leonk
...support by leonk
thingiverse
support
thingiverse
free
Shaver support
...shaver support
thingiverse
support