Thingiverse
Axial Hotrod (V5) by Voodoobrew
by Thingiverse
Last crawled date: 3 years ago
Loved the hot rod Ossum made so much I had to make one. I wanted it to be functional as an actual rock crawler so I put most of the weight up front and down low for steep climbs.
I designed it to work with an axial ax10 wraith or scx10 style transmission with an extended output shaft I had laying around. I am using my old rr10 bomber drivelines and ar60 axles on 2.2 wheels and tires.
This is designed to be printed on my anet a8 with a 220x220 mm bed, 200x200 is probably no problem as well.
The overall wheel base is 380mm so its a monster.
Rear links are 120mm
Front Links 160mm
Still need to finish the front battery tray for looks and shock mount is weak.but these files are drive able as you can see in the pictures.
Update V2:
Added assembled non print version.
Updated battery tray (Unprinted) Radiator in front doesn't look great from my slicer, need comments on how to improve. maybe just reduce detail. I print at .3.. on this.
Added Battery Lid (Unprinted) Not as easy to print as I would like and no mount system. so if your need this printed now, you can just drill holes down through the edges and install screws, or maybe double stick tape.
Update V3:
Ok so I didn't realize before I make an stl I should combine the parts into a single solid, then convert to stl. So some parts may print funky. Just fixed Battery tray, need to review other parts.
Deleted old files, Should I do that?
Going to need to beef up upper link mounts.
Update 3.5
no upload at this time, but v4 will only use the same bed, roof and grill.
old Cab, battery tray, battery lid and skid will not fit properly. so hold off printing those for now.
Update v4
New skid with reinforced upper link mounts
battery lid should clip in
new battery tray
new cab
updated whole 3d view
Update v4.1
Slight modification to gear thicken gear cover on battery tray.
I'm not putting this as finalized yet, but its pretty damn close, I might add headlights to the battery tray, and it needs some testing, but I am printing it, and probably will not print any following versions myself, unless I find a major hidden flaw.
Status after v4.1 I have reprinted most of the parts, not including the cab, I am using the original ossum cab printed at 80% height (found here https://www.myminifactory.com/object/3d-print-35986 with some body clips I printed and keep cutting down I will probably add later as an alternative method of assembly) . I have noticed the cab I designed "may" have issues fitting together during assembly. I didn't leave a whole lot of wiggle room preferring just to grind down the plastic with a rotary tool if necessary. if you have any issues or broken parts please let me know in the comments and I will attempt to fix them. Also after adding the spur gear shroud I realize the maxim spur that will fit under it is a 56t stock axial gear. If you want a larger 68t gear for low speed you will need to cut that wire safety shroud off.
Drove this in the rocks for a few hours.
Had no breaks.
Everyone loved it
The issue with assembly has to do with the screw holding in the front upper links. I used long screws that don't allow the battery tray and cab assembly to drop straight down to the chassis. The cab I modified may flex enough to fit depending on the hardware used. But I still haven't printed the current body to test.
7/27 added some other grill options. Added a battery tray with exhaust that is 3mm wider so it wont rub the doors as much during assembly, it also has a larger spur gear cover to fit larger spur gears (not sure how large, it can still go larger though).
I'm calling this finished. Anything else I do will be optional upgrades. But will still fit previous versions.
Here is the fusion 360 file of the complete build, if you use it please share you files with the rest of us.https://a360.co/2vtigru
Here is a horrible youtube video of the thing in action https://youtu.be/UCwjHNRoGoQ
8/8/18: Added body clamps for origional body
8/11/18: Added Rollcage and Rollcage with spare tire mount thanks for the idea carlton267
8/25/18: I printed this current version finally, I see there are still changes I need to make concerning the mate between the Cab and Battery tray. Its possible to cram them together, or grind material away to assemble them easier, but it can also be fixed, so I should do that.
9/18/18: v5 OK, so I redesigned the way the cab mounts to the battery tray. So now the cab should be able to slide straight down over the tray and there is no forcing alignment. also the mount screws are more accessible, especially with long hex Drivers. Optionally I beefed up the back corners of the truck bed so the top tips aren't so easy to break. No changes to other parts.
9/25/18 Rotated Cab STL
12/3/2018 I recommend drilling 3mm holes between the bed and the cab and putting bolts between them, as there is a weak spot in the skid I have broken twice. mounting the bed to the cab would fix the issue. The weak spot is where the lower link screws go under the motor.
01/29/2019 (beta v6) Added the holes from the cab to the bed as recommended in previous comment. Overall I am very happy with the performance and durability of this car. As 3d printed parts fail I redesign them for extra durability in these areas. Right now the only issue I have is with the long screws that hold the lower links and the cab to the battery box. They grab the plastic so hard sometimes the screws fail during first assembly. I have not thought of a remedy or procedure to alive the issue other then drilling out the holes some. I am not wanting to bore out the holes in the stl in fear they might get too loose.
02/03/2019 updated the fusion 360 shared file to current version, its a hacked together file with excessive junk all over it, but that's my workflow. https://a360.co/2vtigru
I designed it to work with an axial ax10 wraith or scx10 style transmission with an extended output shaft I had laying around. I am using my old rr10 bomber drivelines and ar60 axles on 2.2 wheels and tires.
This is designed to be printed on my anet a8 with a 220x220 mm bed, 200x200 is probably no problem as well.
The overall wheel base is 380mm so its a monster.
Rear links are 120mm
Front Links 160mm
Still need to finish the front battery tray for looks and shock mount is weak.but these files are drive able as you can see in the pictures.
Update V2:
Added assembled non print version.
Updated battery tray (Unprinted) Radiator in front doesn't look great from my slicer, need comments on how to improve. maybe just reduce detail. I print at .3.. on this.
Added Battery Lid (Unprinted) Not as easy to print as I would like and no mount system. so if your need this printed now, you can just drill holes down through the edges and install screws, or maybe double stick tape.
Update V3:
Ok so I didn't realize before I make an stl I should combine the parts into a single solid, then convert to stl. So some parts may print funky. Just fixed Battery tray, need to review other parts.
Deleted old files, Should I do that?
Going to need to beef up upper link mounts.
Update 3.5
no upload at this time, but v4 will only use the same bed, roof and grill.
old Cab, battery tray, battery lid and skid will not fit properly. so hold off printing those for now.
Update v4
New skid with reinforced upper link mounts
battery lid should clip in
new battery tray
new cab
updated whole 3d view
Update v4.1
Slight modification to gear thicken gear cover on battery tray.
I'm not putting this as finalized yet, but its pretty damn close, I might add headlights to the battery tray, and it needs some testing, but I am printing it, and probably will not print any following versions myself, unless I find a major hidden flaw.
Status after v4.1 I have reprinted most of the parts, not including the cab, I am using the original ossum cab printed at 80% height (found here https://www.myminifactory.com/object/3d-print-35986 with some body clips I printed and keep cutting down I will probably add later as an alternative method of assembly) . I have noticed the cab I designed "may" have issues fitting together during assembly. I didn't leave a whole lot of wiggle room preferring just to grind down the plastic with a rotary tool if necessary. if you have any issues or broken parts please let me know in the comments and I will attempt to fix them. Also after adding the spur gear shroud I realize the maxim spur that will fit under it is a 56t stock axial gear. If you want a larger 68t gear for low speed you will need to cut that wire safety shroud off.
Drove this in the rocks for a few hours.
Had no breaks.
Everyone loved it
The issue with assembly has to do with the screw holding in the front upper links. I used long screws that don't allow the battery tray and cab assembly to drop straight down to the chassis. The cab I modified may flex enough to fit depending on the hardware used. But I still haven't printed the current body to test.
7/27 added some other grill options. Added a battery tray with exhaust that is 3mm wider so it wont rub the doors as much during assembly, it also has a larger spur gear cover to fit larger spur gears (not sure how large, it can still go larger though).
I'm calling this finished. Anything else I do will be optional upgrades. But will still fit previous versions.
Here is the fusion 360 file of the complete build, if you use it please share you files with the rest of us.https://a360.co/2vtigru
Here is a horrible youtube video of the thing in action https://youtu.be/UCwjHNRoGoQ
8/8/18: Added body clamps for origional body
8/11/18: Added Rollcage and Rollcage with spare tire mount thanks for the idea carlton267
8/25/18: I printed this current version finally, I see there are still changes I need to make concerning the mate between the Cab and Battery tray. Its possible to cram them together, or grind material away to assemble them easier, but it can also be fixed, so I should do that.
9/18/18: v5 OK, so I redesigned the way the cab mounts to the battery tray. So now the cab should be able to slide straight down over the tray and there is no forcing alignment. also the mount screws are more accessible, especially with long hex Drivers. Optionally I beefed up the back corners of the truck bed so the top tips aren't so easy to break. No changes to other parts.
9/25/18 Rotated Cab STL
12/3/2018 I recommend drilling 3mm holes between the bed and the cab and putting bolts between them, as there is a weak spot in the skid I have broken twice. mounting the bed to the cab would fix the issue. The weak spot is where the lower link screws go under the motor.
01/29/2019 (beta v6) Added the holes from the cab to the bed as recommended in previous comment. Overall I am very happy with the performance and durability of this car. As 3d printed parts fail I redesign them for extra durability in these areas. Right now the only issue I have is with the long screws that hold the lower links and the cab to the battery box. They grab the plastic so hard sometimes the screws fail during first assembly. I have not thought of a remedy or procedure to alive the issue other then drilling out the holes some. I am not wanting to bore out the holes in the stl in fear they might get too loose.
02/03/2019 updated the fusion 360 shared file to current version, its a hacked together file with excessive junk all over it, but that's my workflow. https://a360.co/2vtigru
Similar models
thingiverse
free
Redcat Everest 10 spur gear cover by tallen8
...wn the teeth of the spur gear. so i designed this simple cover. enjoy
ps: there's no mounting holes, i just glued it in place
thingiverse
free
SCX24 Alien frame and extended Surpass motor mount. by Chaotixtech
...print it .
(support is needed for the frame sides, the front panel stands on the front face)
mirror the side panel to get a pair.
thingiverse
free
TRX-4 Front battery mount by Dao20
...ned with the 2 cell 5800mah lipo battery that i have, in mind. and a pic with the mock hood on over the battery and battery tray.
thingiverse
free
Gloomhaven Insert by pdoronila
...n on facebook.
most of the pieces will not fit most printers, so i will work on getting them cut up to fit at least for a prusa
thingiverse
free
battery hold down for the exobomber skid and the ultra skid by MotorforwardRC
... hold down for the exobomber skid and the ultra skid. the battery tray will fit drone style batteries ins 3s and 4s up to 1550mah
thingiverse
free
FMS A-10 Steering gear mount by donandtheresa
...ove the existing piece of wood for the battery tray and put in a longer piece so this can screw into it.
updated the file 8/23/18
thingiverse
free
Steam Link TV Mount by Mkvgz
... will fit your steam link and avoid issues.
the mount has 1mm clearance so you should be good, if changes needed just lemme know.
thingiverse
free
SCX10 C10 Body by Tim0733
...e it so you can get high resolution but not take days to print one piece. the grill needs to be glued in and the hood has hinges.
thingiverse
free
Whiteboard Accessory Tray
...nterfering with the fit. if the fit is too tight, try scaling that mounting part up by 1%, or if it is too loose, scale it down.
thingiverse
free
Ranger Ex / Quanum Observer battery tray plate by hedeon
...xhawk telemetry module, spare/vtx battery). versions with and without those cutouts are included.
.sldprt files included for mods
Voodoobrew
thingiverse
free
Hobbywing 1080 esc by Voodoobrew
...hobbywing 1080 esc by voodoobrew
thingiverse
esc for mock up.
no wires
thingiverse
free
Tiger paws r/c tires by Voodoobrew
...tiger paws r/c tires by voodoobrew
thingiverse
lolz
thingiverse
free
RR10 Bomber doors by Voodoobrew
...by voodoobrew
thingiverse
just a different style then the other.
your 3d printing software should be able to mirror this thingy.
thingiverse
free
Bomber Doors by Voodoobrew
... faster :p
the holes are too small and its a tad thin but it fits.
i printed it with petg and is was flexible like a credit card.
thingiverse
free
RR10 blank Bomber door by Voodoobrew
...his is a blank door, if you like plain, or bling it out yourself.
your 3d printing software should be able to mirror this thingy.
thingiverse
free
Scx10 chassis by Voodoobrew
...ould share it here as it is so useful to mock up parts.
if the scale is wrong, make sure it is in millimeters then scale it x 0.1
thingiverse
free
Hotrod Pickup bed by Voodoobrew
... loosely based on a 32 ford i guess.
here is the build.https://www.thingiverse.com/thing:2942759
bed 2 has beefier back corners.
thingiverse
free
Wheel hubs nuts by Voodoobrew
... nuts so i made these, maybe use some locktite on them. hole is undersized, i used a tap to thread them, but you can use a drill.
thingiverse
free
RC Parts by Voodoobrew
...nsmission with the extended output shaft, not super duper accurate.
550 size motor,
servo mount,
scx10 stock shocks,
basic servo,
thingiverse
free
Wismec reuleaux charger by Voodoobrew
...
center of of usb port is 10.5cm above base.
this is a loose remix, used the source for a cutout, which made my life much easier.
Hotrod
thingiverse
free
hotrod by atze_peng
...hotrod by atze_peng
thingiverse
a really fast hotrod
thingiverse
free
HotRod Rims by Zavciu
...hotrod rims by zavciu
thingiverse
a rims 4 hotrod model that i'm working on.
thingiverse
free
Project Hotrod by Matu1272
...project hotrod by matu1272
thingiverse
one little project
thingiverse
free
Hotrod pickup sedan by bouncygoth
...
1930s chevy style hotrod in both pickup and sedan styles
now fixed offroad tyres and missing door on pickup and added skp file
thingiverse
free
Hotrod Pickup bed by Voodoobrew
... loosely based on a 32 ford i guess.
here is the build.https://www.thingiverse.com/thing:2942759
bed 2 has beefier back corners.
thingiverse
free
HotRod boot by monnerby
...ss support and a nice finish. i used a solder iron to glue the parts together. alternate methods are glue or using a 3d printpen.
thingiverse
free
Dual Extruder Things for Hotrod by macone1 by kabau
...d, the dual extruder mods for macone1 hotrod.
headlamps coming with a helper to stick to build plate, just cut.off after printing
thingiverse
free
32 Ford Hotrod Battery Tray for SSD TrailKing by BigPercy
...ercy
thingiverse
battery tray for ssd trailking 32 ford hotrod conversion
worked great for me, hopefully useful for others also
thingiverse
free
Ford 32 Hotrod - Fuelcell by Alexjoha
...uelcell by alexjoha
thingiverse
fuel cell for the ford 32 bed, it has good space for electronics and there is a gasket included.
thingiverse
free
Bague Lastolite Hotrod Strip Softbox 40x120cm by meaceay
... lastolite hotrod strip softbox 40x120cm by meaceay
thingiverse
bonjour,
ma bague lastolite ayant fondu, je l'ai remodélisé.
Axial
thingiverse
free
Toupie avec lanceur axial / whirligig with axial launcher by run78
...ec lanceur axial / whirligig with axial launcher by run78
thingiverse
toupie avec lanceur axial / whirligig with axial launcher.
thingiverse
free
Crawler Guard Axial
...crawler guard axial
thingiverse
crawler guard axial
thingiverse
free
Axial Snowtires by zer0flag
...axial snowtires by zer0flag
thingiverse
snowtires for axial scx 10 crawler
i used sketchup to fit these tires the axial crawler.
thingiverse
free
Axial Logo by mx_rider_250
...axial logo by mx_rider_250
thingiverse
axial racing logo, enjoy!
thingiverse
free
Axial Snowshield by zer0flag
...axial snowshield by zer0flag
thingiverse
snowshiled for axial scx crawler
thingiverse
free
Roulement axial by AlbertKarlen
...roulement axial by albertkarlen
thingiverse
roulement à bille axial
thingiverse
free
Axial Lipo Plate
...axial lipo plate
thingiverse
plate for axial scx 10 ii for 3s
thingiverse
free
Axial Radio Box
...axial radio box
thingiverse
radio box that uses the original axial cap and seals.
thingiverse
free
Chasis axial by luisgrudl
...chasis axial by luisgrudl
thingiverse
chasis axial similar en evaluación puede hacer mejoras
thingiverse
free
Axial Fan by Sundaykits
...axial fan by sundaykits
thingiverse
this is a complete axial fan design.
**
check our products on www.sundaykits.com now.
V5
thingiverse
free
Pedestal v5 by DanTech
...pedestal v5 by dantech
thingiverse
pedestal v5
thingiverse
free
inMotion Parking V5 V5F V5+ V5F+
... v5f, v5+ or v5f+
acts like a mud guard and parking. can me used on both front and rear.
printed with tpu, but pla should be fine
thingiverse
free
V5 Battery Clip
...v5 battery clip
thingiverse
clip for vex v5 battery
thingiverse
free
V5 by cgutmach
...v5 by cgutmach
thingiverse
updated
thingiverse
free
V5 Fanduct by strelok1111
...v5 fanduct by strelok1111
thingiverse
this is fan duct for v5 radiator hot end.
thingiverse
free
Vitara_soft-top_bundle v5
...vitara_soft-top_bundle v5
thingiverse
vitara_soft-top_bundle v5- replace the original one, more flexible and easy to release
thingiverse
free
HotEnd v5 by tom4cad
...hotend v5 by tom4cad
thingiverse
3d model of hotend v5. (25mm diameter)
direct
might be used for 3d assembly
thingiverse
free
E3d V5 Fanshroud by RaOno
...e3d v5 fanshroud by raono
thingiverse
fanduct for v5 . there are 2 versions
thingiverse
free
Kraton 6s v5 by BallisticLotus
...kraton 6s v5 by ballisticlotus
thingiverse
should be a direct fit for the kraton 6s v5
thingiverse
free
falla v5 extruder by exilaus
...falla v5 extruder by exilaus
thingiverse
supporto per estrusore v5 originale e clone.