autonomous cleaning machine

Last crawled date: 1 year, 11 months ago

under construction
... here we have an autonomous cleaning machine for buildings, interiors: for living rooms - but also for other rooms in a building. So also for storage rooms, service rooms, supply rooms ....
it is about designing a cleaning device that can work completely autonomously. and a device that can be manufactured, assembled and disassembled fully automatically by machines.

here we have the first parts of a cyclone - and also an interchangeable - reusable cassette for a fine filter made of fabric - from which you can remove the filter materials - roughly and finely - for washing.

the device should:
- suck
- sweep, even carpets, loosen the dirt
- Clean, i.e. wipe with a damp cloth - also loosen dirt, remove
- inject dust into pellets so that the dirt container remains free
- Recycle water, cleaning solutions, reuse.
- coat, seal, wax, polish surfaces

the device has two middle drive wheels, consisting of two small motors - on the outside of which a rubber layer was vulcanized as a running surface.
it also has four smaller, similarly designed wheels for controlling the device

the device has sensors on an outer rim - in order to be able to measure the particle density in the air, to be able to spray water with a fine mist if the dust density is too high.
Avoid dusting when working.
the device is to be driven - yes, since it can separate water from the air in the room - and uses water: through a combination of hydrogen cells.
the device has an internal disinfection radiator for cleaning the room air, suction air.

step, igs, stl