Autobot Huawei W1 case by Lukas_m5

Last crawled date: 3 years ago

This multi colored case is printed on a printer with a single Extruder, it can also be printed by a printer with a dual extruder.
To print this case with one extruder you have to slice every part alone. To position the logo on the printer bed, use the case file. You can center it in your slicing Software and use it as reference for position the other parts, remove it before slicing.
After slicing you have to modify the code. The printer should print two layers of one color, then two layers of the other color, and so on. (Two layers worked with my k8200 printer, with other printer you may have to use one layer.) For this you have to remove the unneeded layers from the code. Make sure you only removed the code of the layers and no other important commands.
After preparing the codes you can print. First print two layers of the case. Then print two layers of the logo and so on. This may be a bit time consuming, but the result is worth it.
These step is very difficult! When there is already an object in the printer, your printer may crash. Set the speed level very low. It worked fine with a Velleman K8200 printer, but maybe it won't work with other printer types!