ATX breakout board cover by Hobb3s

Last crawled date: 3 years ago

I wanted a bench top power supply, I found the hobby ones can be quite expensive. So I decided to repurpose an old PC power supply that was of no other use. First I tried parting out all I would need myself, and then I discovered the sparkfun breakout board which turned out to be cheaper than buying all the components myself. Of course with the little ones around I didn't want any little fingers getting inadvertently zapped, so I added a few extra switches to the board to power off each individually. I designed the case with that in minde and to keep the board and fuses from little fingers and falling things. The print was my first time with this red pla, and it didn't come out as nice as I would have liked, but hey that's on the inside of the box.
Other things to make this work:
-ATX power supply (cut off all the extra wires and capped them.
-sparkfun atx breakout board
-5 mini toggle switches (because they're way more fun than the cheap slide switch that came with the board)
-green led (green means go, power is on, came with a red one)
-screws
-wire that's laying around