Thingiverse
Atomstack A5 Z-Axis by hurzhurz
by Thingiverse
Last crawled date: 2 years, 11 months ago
Motorized Z-Axis for Atomstack A5.
(with mount for 3D touch sensor like BLTouch)
Effective Z-axis travel is between 100 to 110mm.
Additional weight on X-axis carriage is about 300 grams (690 -> 990).
Y-axis travel is reduced by about 18mm.
Touch sensor offsets: X-25 Y38.5 Z0
Both parts can be printed lying flat and without support.
Therefore, screw holes for the linear rail have a sacrificial layer that has to be be punched or drilled through.
Used additional parts:
150mm MGN9 linear rail with a MGN9H carriage block
Nema 11 stepper motor with 150mm TR5x2 lead screw and (POM) nut (eg. 28SG51-150N52 from AliExpress)
(optional) 3D Touch Sensor (BLTouch or clone from e.g. Trianglelab)
Needed screws:
Linear rail: 8 pieces M3x8 cylinder head screws + 8 pieces M3 hexagon nuts
Linear rail carriage block: 4 pieces M3x8 countersunk screws
Motor: 4 pieces M2.5x5 cylinder head screws (may depend on motor!)
Lead screw nut: 3 pieces M3x6 or M3x8 (cylinder head) screws
Touch sensor: 2 pieces M3x4 or M3x6 cylinder head screws
(with mount for 3D touch sensor like BLTouch)
Effective Z-axis travel is between 100 to 110mm.
Additional weight on X-axis carriage is about 300 grams (690 -> 990).
Y-axis travel is reduced by about 18mm.
Touch sensor offsets: X-25 Y38.5 Z0
Both parts can be printed lying flat and without support.
Therefore, screw holes for the linear rail have a sacrificial layer that has to be be punched or drilled through.
Used additional parts:
150mm MGN9 linear rail with a MGN9H carriage block
Nema 11 stepper motor with 150mm TR5x2 lead screw and (POM) nut (eg. 28SG51-150N52 from AliExpress)
(optional) 3D Touch Sensor (BLTouch or clone from e.g. Trianglelab)
Needed screws:
Linear rail: 8 pieces M3x8 cylinder head screws + 8 pieces M3 hexagon nuts
Linear rail carriage block: 4 pieces M3x8 countersunk screws
Motor: 4 pieces M2.5x5 cylinder head screws (may depend on motor!)
Lead screw nut: 3 pieces M3x6 or M3x8 (cylinder head) screws
Touch sensor: 2 pieces M3x4 or M3x6 cylinder head screws
Similar models
thingiverse
free
Z-Axis Lead Screw Nut Linear Bearing Mount by virtualight
...lead screw nut linear bearing mount by virtualight
thingiverse
prototype z-axis lead screw nut linear bearing mount for rigidbot
thingiverse
free
JG Aurora A3S/A5 BLTouch Sensor Mount by gzfelix
...s and washers to mount the sensor to the appropriate z offset.
use the slot in the mount's back to route bltouch's wires.
thingiverse
free
BD's Tarantula Z Motor and Nut Mounts by bdwalker1
... print bed. it moves things far enough back to allow the x-axis carriage to pass between the lead screw and the x-axis extrusion.
thingiverse
free
Maslow Meticulous Z Axis Lead Screw Nut Block
...crew.
the lead screw nut holes are m2 and the mounting holes are m4, though both are parametric if you load up the freecad file.
thingiverse
free
Tronxy X5SA linear guides by Far_a_way
... the y-limit switch, print out the modified retaining bracket, dismantle the limit switch, relocate and reassemble on the inside.
thingiverse
free
Z-Axis Carriage by Flytech81
...verse
this carriage is made for a custom 3d printer. it uses 3/8 rods and 8mm linear rails for the z-axis. printed at 20% infill
thingiverse
free
Ender 3 V2 Linear Rail Direct Drive X-Axis Conversion V1 by VonTaube
...
crimp belt and tension
see ender 3 v2 direct drive link below for extruder install infohttps://www.thingiverse.com/thing:4621486
thingiverse
free
Z-axis_linear_rails_MGN12H by Far_a_way
...justment.
if necessary, extend the cable and tube.
reattach the dismantled components of the x-axis, lower the x-axis and adjust.
thingiverse
free
Tevo Tarantula Pro Linear Rail Upgrade
...ews (the black bed attachment cap screws should work)
(4) - m5 nuts (the lock nuts in the kit that came with the ttp should work)
thingiverse
free
Mingda D2 X Linear Rail Conversion by MementoArgonaut
...ere are quite some changes on the newer versions of the printer so i can't guarantee that this conversion will work directly.
Hurzhurz
thingiverse
free
Atomstack A5 Duet 2 Wifi Mount by hurzhurz
...mple and rudimentary mount frame to screw the duet wifi at the position where usually the electronics box on the atomstack a5 is.
thingiverse
free
Cisco Catalyst 9300 Label Plate by hurzhurz
... be "unplugged" quickly).
there are two sizes:
small: 48mm x 7mm
large: 60mm x 8mm (also covers mini usb console port!)
thingiverse
free
CR-10 Direct BMG with e3d V6 by cporto
...reuse the original part fan and cooler. went with hurzhurz design. which is linked here, but i didn't like...
Atomstack
thingiverse
free
Atomstack A5 Foot by ccarmody5
...atomstack a5 foot by ccarmody5
thingiverse
these are feet that i made to hold my atomstack a5 laser in place.
thingiverse
free
Air Assist Atomstack A5 by corentintav
...air assist atomstack a5 by corentintav
thingiverse
air assist pour atomstack a5.
thingiverse
free
Atomstack A5 pro legs by giapap
...ed this legs for my atomstack a5 pro, due to rotary tool setup i use. they fit right for my a5 pro and maybe for older a5 models.
thingiverse
free
Atomstack A5 Duet 2 Wifi Mount by hurzhurz
...mple and rudimentary mount frame to screw the duet wifi at the position where usually the electronics box on the atomstack a5 is.
thingiverse
free
Atomstack A5 - Limit switches X-Y by Rmc-Reloaded
...thingiverse
to position the limit switch for those who have atomstack a5.
details on https://www.facebook.com/groups/atomstack3d
thingiverse
free
Atomstack A5 Cable chain by hopino
...cable chain - i bought it here https://lnk.sk/aao4
i had to extend the cables. https://lnk.sk/hk45
i hope this helps some of you.
thingiverse
free
AtomStack L40 laser module mount by papergeek
... module. i created this adapter so it can be mounted on my ox cnc rig. this design also provides for strain relief for the wires.
thingiverse
free
Atomstack A5 Foot by hopino
... foot by hopino
thingiverse
hi, i've created simple laser legs that you can screw on the table.
maybe it will help someone.
thingiverse
free
atomstack A5 Z axis by Sentinel_Pro
...illo allen m5x35mm
2x arandela m6
2x muelle interior paso para tornillo m5. (20mm long.)
2x tornillo allen m3x20mm
3x tuercas m3.
thingiverse
free
Atomstack Laser Power Switch Box by kamlooper
...ver build at your own risk!! my unit has a positive center on the plug/jack. be sure to triple check your polarity before using!!
A5
turbosquid
$50
A5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Slipper Bath A5
...slipper bath a5
3ddd
toto
slipper bath a5
3ddd
$1
Slipper Bath A5
...slipper bath a5
3ddd
toto , ванна
slipper bath a5
turbosquid
$130
A5 Coupé
...urbosquid
royalty free 3d model a5 coupé for download as max on turbosquid: 3d models for games, architecture, videos. (1689937)
turbosquid
$29
Audi A5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Audi A5
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$89
Audi A5 Convertible
...erman german interior interior luxury luxury sport sport vehicle vehicle
audi a5 convertible – high detailed model with interior.
3d_export
$50
Audi A5 3D Model
...audi a5 3d model
3dexport
audi a5 s5 sline
audi a5 3d model teduk 33305 3dexport
3d_ocean
$89
Audi A5 Coupe
...iled germany germany hight hight luxury luxury photorealistic photorealistic sedan sedan
audi a5 coupe 2010 hight detailed model.
3ddd
free
Masiero ve942/a5
...masiero ve942/a5
3ddd
masiero , ottocento
бра masiero ve942/a5
l 45 cm
h 40 cm
Axis
3ddd
$1
Мария Axis
...
3ddd
кухня , классическая , axis
модель кухни.
3d_export
$22
Axis robot 6-axis robotic arm
...ing parts drawings, standard parts purchased parts list, can be produced directly according to the drawings, welcome to download!
3ddd
free
Versatile Axis
...ddd
nexus , плитка
http://bvtileandstone.com/ceramic-porcelain/versatile-axis/
3d_export
$19
robot 2 axis
...robot 2 axis
3dexport
robot 2 axis
turbosquid
$40
Axis R5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$40
Axis S5F
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Axis Athlon
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Linear Axis
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
drawing axis
...drawing axis
3dexport
simple rendering of the scene file
3ddd
$1
versatile axis ARC
...versatile axis arc
3ddd
versatile , плитка
versatile axis arc red dot design award
Z
3d_export
$5
nissan z
...nissan z
3dexport
nissan z
3ddd
$1
Vase Z
...vase z
3ddd
vase z
3ddd
$1
полотенцесушить Z
...полотенцесушить z
3ddd
полотенцесушитель
полотенцесушить z
design_connected
free
Z-Chair
...z-chair
designconnected
free 3d model of z-chair designed by karman, aleksei.
design_connected
$11
Z Lamp
...z lamp
designconnected
phillips z lamp computer generated 3d model. designed by kalff, louis.
3d_export
$5
Dragon balls z
...dragon balls z
3dexport
dragon ball z
turbosquid
$20
Fighter Z
...
turbosquid
royalty free 3d model fighter z for download as on turbosquid: 3d models for games, architecture, videos. (1292563)
turbosquid
$9
Pen Z
...pen z
turbosquid
free 3d model pen z for download as obj on turbosquid: 3d models for games, architecture, videos. (1686775)
turbosquid
free
z chair
...z chair
turbosquid
free 3d model z chair for download as max on turbosquid: 3d models for games, architecture, videos. (1410230)
turbosquid
$5
Letter Z
...urbosquid
royalty free 3d model letter z for download as max on turbosquid: 3d models for games, architecture, videos. (1408540)