Thingiverse
Astronomie "field lamp" / "Umfeldbeleuchtung" by energiebrand
by Thingiverse
Last crawled date: 3 years, 1 month ago
UPDATE 25th of Feb 2021:
added here the "raw" versions with the original threads. I never pronted them but maybe someone will try or modify them for better fitting -> please read the the last chapter about the problem when printing threads
This is a LED lamp which lightens the area around my telescope mount. It fits into an ocular storage hole of the tripod but is not fixed to it. So can be used to lighten other thing temporary like a star map, an ocular or whatvever.
4 x 5mm LED red (650nm) and 2 x 100Ohm resistors are needed. 2 LED´s are soldered in series with a 100Ohm resistor. Both strands are soldered in parallel. Power consumption is 10mA per strand using a 5V source. I used an USB cable and my Raspberry Pi (Astroberry) + USB3.0 hub for powering the lamp. If light is too bright, use an additional trimmer 100Ohm or 2 x 200 instead ot 100Ohm resitors for example.
Unfortunately there is one problem: I did not manage to print the M32 thread on both parts correctly. This means both parts will fit only 1/2 turn and then it blocks. However it works! If someone can fix that problem please leave a comment and files. I will leave here the STL as well as the original FUSION360 files for further and better development!
added here the "raw" versions with the original threads. I never pronted them but maybe someone will try or modify them for better fitting -> please read the the last chapter about the problem when printing threads
This is a LED lamp which lightens the area around my telescope mount. It fits into an ocular storage hole of the tripod but is not fixed to it. So can be used to lighten other thing temporary like a star map, an ocular or whatvever.
4 x 5mm LED red (650nm) and 2 x 100Ohm resistors are needed. 2 LED´s are soldered in series with a 100Ohm resistor. Both strands are soldered in parallel. Power consumption is 10mA per strand using a 5V source. I used an USB cable and my Raspberry Pi (Astroberry) + USB3.0 hub for powering the lamp. If light is too bright, use an additional trimmer 100Ohm or 2 x 200 instead ot 100Ohm resitors for example.
Unfortunately there is one problem: I did not manage to print the M32 thread on both parts correctly. This means both parts will fit only 1/2 turn and then it blocks. However it works! If someone can fix that problem please leave a comment and files. I will leave here the STL as well as the original FUSION360 files for further and better development!
Similar models
thingiverse
free
Ocular rack / Okularhalter for OMEGON Dobson and others... by energiebrand
...a led holder with some red led´s shining thru the holes and back of the racks. also a handle for the dobsonian mount will follow.
thingiverse
free
Moon support USB by internest
...ds. you can connect to any mobile charger.
important! remember to add at least 100ohm resistor between the leds and power source.
thingiverse
free
1W power led usb case by tcbilge
...led,
led pcb,
4.7 ohm 1w resistor,
led lens and black holder,
usb a connector.
the resistor is soldered between led(+) and usb(+)
thingiverse
free
Arc reactor with stand by agarajag
...he same version than me.
all the merits are from skimbal, matt_black_90 and enif so please if you like this give them a like too.
thingiverse
free
Expandable LED Wall Mountable Work Light by scootnfast
...onto the base of one of your lamps. it is made to fit right over the base of the lamp post. pop in a switch and your good to go.
thingiverse
free
LED strip mount for articulating arm
... the led strips with hot glue to protect them.
i mountet the whole assembly to the bottom of the gantry on my mostly printed cnc.
thingiverse
free
Antenna Dish Lamp by Wizardof0z
...ly printing the dish at an angle with supports is possible.
an m3x12 and m3 nut is used to hold the dish antenna into the stand.
thingiverse
free
Ultimaker 2 LED Fix by mnis
...based on your comments i can try to make things better. photos with the already assembled object does not show the latest design.
thingiverse
free
RGB Lighting for Kolink Rocket Push Power Button with Asus Aura
...is used for the power switch cable,
the three drillings off-center for the leds.
if you have further questions, feel free to ask.
thingiverse
free
Black Widow Bites MK1 by dambergn
...nd not solid wire. i recommend not using a brim on the battery holders because cleanup can be a bit of a pain and cause binding.
Energiebrand
thingiverse
free
Support for small lubricator by energiebrand
...support for small lubricator by energiebrand
thingiverse
a support for a small pen lubricator...
thingiverse
free
Case board bracket / Regalbretthalter by energiebrand
...etthalter by energiebrand
thingiverse
a case board bracket 80mm x 160mm. screw diameter 5.5mm
i used 15% infill, material is pla
thingiverse
free
Garden cabinet locking bold / Gartenschrank Riegel by energiebrand
...garden cabinet locking bold / gartenschrank riegel by energiebrand
thingiverse
a locking bolt for my garden cabinet. i used pla.
thingiverse
free
Water hose bracket (15mm) / Gartenschlauchhalterung by energiebrand
...nd
thingiverse
a bracket for a 15mm water hose. the hole diameter for the screws is 5.5mm. the water hose hole diameter is 16mm.
thingiverse
free
Skywatcher finder - 90° adapter / Sucheradapter by energiebrand
...; 9x50 skywatcher finder telescope.
ein adapter um den skywatcher 90° polaris sucher an ein skywatcher 9x50 sucher zu adaptieren.
thingiverse
free
Handle (for Dobson telescope mount...) by energiebrand
...s available:
with omegon text without cable slot
without omegon text (neutral) without cable slot
with omegon text and cable slot
thingiverse
free
Water hose bracket (15mm) / Gartenschlauchhalterung by energiebrand
...thingi. the statistics count the upload but i do not have access to the 2 previous ones and they are alos not shown for public...
thingiverse
free
Platform / Plattform for 20mm rod / für 20mm Stange by energiebrand
...ith sidewinder x1. approx. 4h print.
200mm diameter
use "concentric" vor top/brim/bottom layer if using cura as slicer.
thingiverse
free
Thermometer housing (ALDI) by energiebrand
...ion of the rounded roof where i used 5% infill. scliced with cura 4.5. normal speed set to 70mm/s.
no support or brim neccessary.
thingiverse
free
Bird feeder platform (add on for British Garden Bird Feeder) by energiebrand
... a flower box.
i used cura for slicing and set infill on the platform part to 10% and the stick part to 25%.
it is made from pla.
Astronomie
3d_export
$25
Telescope 3D Model
...telescope 3d model
3dexport
telescope science astronomy space
telescope 3d model jochy 17284 3dexport
3d_export
$5
The Earth 3D Model
...the earth 3d model
3dexport
earth planet science astronomy world blender
the earth 3d model cannibal989 83350 3dexport
3d_export
$5
Globe 3D Model
...globe 3d model
3dexport
globe geography decoration science astronomy world map desk
globe 3d model sasopuma 88288 3dexport
3d_ocean
$3
Scope
...ns planet science scope sky space telescope univers
a classic scope used for telescopes for locating plannets or stars on the sky
3d_export
$100
Generic telescope 3D Model
... telescope astronomy astronomic radiotelescope nasa radio refractor observatory
generic telescope 3d model tartino 25446 3dexport
3d_export
$50
Antenna satellite 3D Model
...e radiotelescope telescope antenna astronomy dish orbit communication space nasa
antenna satellite 3d model tartino 2785 3dexport
3d_export
$20
Asteroids 3D Model
...eroid debris space earth comet astronomy science rock crater universe galaxy outer
asteroids 3d model boscorelli3d 82880 3dexport
3d_export
$90
Observatory 3D Model
...sa space reflecting telescope dome cosmic galaxy observatory stargazer city architecture
observatory 3d model braz 11464 3dexport
3d_export
$60
Telescope 3D Model
...ace reflecting telescope cosmic galaxy observatory stargazer architecture gemini mauna kea
telescope 3d model braz 12064 3dexport
3d_export
$9
Solar sundial clock 3D Model
...time medieval clock metal steel second copernic art hour watch old astronomy
solar sundial clock 3d model kreatura 92441 3dexport
Field
design_connected
$27
Field
...field
designconnected
decameron field computer generated 3d model. designed by ferreira, marcus.
turbosquid
$4
field
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$65
field
...field
3dexport
simple rendering of the scene file
3d_export
$65
field
...field
3dexport
simple rendering of the scene file
3d_export
$65
field
...field
3dexport
simple rendering of the scene file
3d_export
$65
field
...field
3dexport
simple rendering of the scene file
3d_export
$65
field
...field
3dexport
simple rendering of the scene file
3d_export
$65
field
...field
3dexport
simple rendering of the scene file
3d_export
$20
sunflower field
...sunflower field
3dexport
field with sunflowers. helianthus - sunflowers sunflower
3ddd
$1
Foscarini Fields
...lds
3ddd
foscarini , fields
http://www.foscarini.com/en/lamps/wall/fields.html
Lamp
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp table lamp reading lamp
lamp - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Lamp
...lamp
archibase planet
lamp reading lamp table lamp lantern
lamp - 3d model (*.3ds) for interior 3d visualization.
3d_ocean
$6
Lamp
...lamp
3docean
lamp
a high quality lamp.