Articulated GU10 Lamp Christmas Edition by ikonko

Last crawled date: 3 years ago

This is my recent entry for RemixChallenge.
Inspired by three things on Thingiverse:
Articulated PCB Workstation by giufini http://www.thingiverse.com/thing:801279
Pointy Star by iamnotachoice http://www.thingiverse.com/thing:563306
And my own "ordinary" version of GU10 lamp http://www.thingiverse.com/thing:1703148
Please keep best practices in mind during the construction [as also described in my original design]:

DO NOT use other than LED bulbs when printing with PLA. Otherwise the shades will get melted shortly and can cause the short circuit in the socket or cable.


You can glue GU10 socket inside the shade if needed, Eventually use 2 small screws in socket thru holes to tight it up inside.

Be careful with electrical wires and ensure the safety (insulate as appropriate if cable extension is needed, avoid short circuit to prevent the fire etc.)
The lamp was printed with gold PLA 1.75mm filament on Prusa I3.