Articulated GU10 Lamp by ikonko

Last crawled date: 3 years ago

This is derived from articulated PCB arm by giufini:http://www.thingiverse.com/thing:801279
I've used 5 joints between the wood base and each lamp shade due to a GU10 socket cable length limitation - 13cm / 5". It is sufficient to position the lamp shade to desired direction.
DO NOT use other than LED bulbs when printing with PLA. Otherwise the shades will get melted shortly and can cause the short circuit in the socket or cable.
Printed with copper color PLA (not copper fill).
You can glue GU10 socket inside the shade if needed, Eventually use 2 small screws in socket thru holes to tight it up inside.
Be careful with electrical wires and ensure the safety (insulate as appropriate if cable extension is needed, avoid short circuit to prevent the fire etc.)