ARP9 things

Last crawled date: 4 years, 3 months ago

OK OK, now I will try to describe in detail all this mess...
The main message of this thing is corner adapter to the stock, for those who are straight interfere with a stock (such as a paintball helmet). Now already not remember why, but a corner equals roughly 21 degrees. I was doing this project for my friend.
Important detail! WITH THIS MOD, THE STOCK IS ONLY IN THE UNFOLDED STATE!.
On page things can be download files trinkets, files clamps for double magazine (my friend uses two for stability), so same two battery compartment 25mm and 75mm .
Further there are two archives: one with one more battery compartment and actually with a rotary piece (in archive two versions). At our disposal in the design were available metal bushings M6 external-M4 internal thread (photo is in the archive), but for better accessibility, I designed the same parts to use a pair of screw-nut M4, such files have the prefix "_hex".
Now more about the archives
In Archive "angular_stock" there are two version of (with use of bushings or screw-nut M4). in any case you will need an additional screw M4 (length not know, perhaps as native). As far as I remember the installation of all this is relatively simple, it is necessary to disconnect the stock and screw the corner insert on the principle of how the stock, then screw the stock to the insert using the clamping ring, in the process of all this, we forget to pass the wires. In the first photo, instead of a stock plug, a 25mm plug is used, if you use some long batteries, there is a 75mm plug.
In Archive "battery_box" Assembly of the battery compartment for two 18650 batteries with the addition of a voltmeter and a button (7x7 dpdt) to check the charge. To describe it in detail I don't have the strength to forgive, let the project dare not everyone (to solder two batteries through the voltmeter and the button and to put it gently).
it seems nothing is forgotten. thank you for your attention