apple tablet computer ab glue dispensing production line

Last crawled date: 1 year, 9 months ago

this is a complex hot capacity press forming equipment for the plastic and metal parts of the back shell of a tablet computer. this equipment is mainly used for dispensing glue to the back shell of huawei's tablet computer, then turning and pressing the metal shell and plastic shell with good ab glue. the conveyor line will flow out to the hot pressure position automatically, and the automatic conveying line will be hot pressed in two stations, because the heat capacity time is relatively long the main working principle of the whole production line is: manually put the metal shell on the dispensing fixture, and the starting point is ab after the glue point is turned over, the metal shell and the plastic shell are pressed. the conveyor belt sends the water plate to the hot pressing position and starts the hot pressing work. the hot pressed part flows out to the main conveyor belt automatically. from the main conveyor belt to the back end, the material is collected manually. then the water plate flows into the glue dispensing position, and the metal shell and plastic shell are placed manually. due to the complex working position and equipment, here is a brief introduction like or interested friends welcome to download.