Anycubic Kossel OctoPrint System Mounter by KABCO

Last crawled date: 3 years ago

OctoPrint system (Raspberry Pi <1> + Step Down Converter <2>) mounter for Anycubic Kossel.
It can auto power on the RaspBerry Pi when printer's power going on.
Converter input: 12VDC from printer's PSU.
Converter output: Adjusted 5VDC for Raspberry Pi.
You need:
A. Make a power line connection from converter to Raspberry Pi, you can choose input method of USB or GPIO pins. (+ for 2 or 4 / - for 6)
B. M2.5 Metal inserts x 4 for Raspberry Pi Install. <3>
C. M3 metal inserts x 4 for the converter. <3>
D. M4 T-Nuts & Screws x 2
*1
I used Raspberry Pi 3B+. Maybe useable others series if same holes design.
*2https://www.aliexpress.com/item/32641300009.html
*3https://www.aliexpress.com/item/32961915881.html