Thingiverse
Anycubic i3 Mega extruder for flex or TPU filament
by Thingiverse
Last crawled date: 4 years, 2 months ago
Yet another extruder for printing flexible filament on the Anycubic i3 Mega. Designed to be used with 4mm PTFE tube, only need about 20-25mm. Reuses the original silver collet. Install the collet with an M6 nut or my replacement printable insert nut, insert the PTFE until it stops, and then trim it to fit using a sharp razor.
I also used a tapered diamond file to open up the end of the PTFE tube to a cone shape to help guide the filament during loading, although that step isn't strictly necessary.
You'll see there is also PTFE tubing below the feed gear as well - this is only for convenience during filament loading - same with the nut that screws into the lower portion of the extruder. The nut has a funnel shape which helps guide the filament into the proper location for loading - I was constantly having trouble finding the lower hole and then getting the filament loaded to the right spot. Having the lower nut and a section of PTFE tube helps guide the filament to the right spot on the gear. With this in place, I push in the filament until it stops, and then turn the extruder with my extruder knob (pictured in the last photo) to load it the rest of the way. If you don't want to bother with the PTFE tubing in the bottom, I've got a variant of the lower plug which has a guide tube that replaces the PTFE.
I also used a tapered diamond file to open up the end of the PTFE tube to a cone shape to help guide the filament during loading, although that step isn't strictly necessary.
You'll see there is also PTFE tubing below the feed gear as well - this is only for convenience during filament loading - same with the nut that screws into the lower portion of the extruder. The nut has a funnel shape which helps guide the filament into the proper location for loading - I was constantly having trouble finding the lower hole and then getting the filament loaded to the right spot. Having the lower nut and a section of PTFE tube helps guide the filament to the right spot on the gear. With this in place, I push in the filament until it stops, and then turn the extruder with my extruder knob (pictured in the last photo) to load it the rest of the way. If you don't want to bother with the PTFE tubing in the bottom, I've got a variant of the lower plug which has a guide tube that replaces the PTFE.
Similar models
thingiverse
free
Filament holder Anycubic I3 Mega
...1) with 4 screws to the right vertical crossbar. insert the u-shaped coil holder (part2) into the recess until it stops. finished
thingiverse
free
Anycubic i3 Mega S - Extruder Filement Guide by Racoon2020
...se
replacement for the standard i3 mega s extruder filament guide.
use a 2mm drill bit to ensure filament guide hole is correct.
thingiverse
free
Anycubic i3 Mega Filament Guide
...i3 mega frame. use 2 longer screws than the original. i push a ptfe tube through the holes. the filament runs smoothly.
greetings
thingiverse
free
Anycubic Mega S extruder TPU Flex mod by ez_diy_technics
...rint), and you should use slow printing speed, around 20-30mm/s, may be, 0.5mm nozzle will allow you to print with higher speeds.
thingiverse
free
Anycubic Mega -S (i3 mega) filament guide by qzb
...ted this part i designed. it will work for the i3 mega or the mega -s. i couldn’t find anyone else who had uploaded one, so here.
thingiverse
free
Wanhao Extruder Plate for Flexible Filament by dokool
...wanhao i3 and guess it will work for any similar extruder. a short length of ptfe (approx 6mm long)...
thingiverse
free
Anycubic i3 Mega S Feeder Lever by pubskiste
...cutting the model in half and glued it together afterwards. for easier printing wo support and easier inserting of the ptfe tube.
thingiverse
free
Multi Filament Guide for Anycubic I3 MEga by Phreak87
...multi filament guide for anycubic i3 mega by phreak87
thingiverse
filament guide for anycubic i3 mega
thingiverse
free
Anycubic i3 Mega Custom extruder + Filament Sensor by JCBell
...wden tube between extruder and filament spool together with filament sensor
doesn't limit you on filament sensor cable length
thingiverse
free
Filament Guide Anycubic i3 Mega by scoot13
...ment guide anycubic i3 mega by scoot13
thingiverse
attaches to body of the 3d printer to guide the filament directly to extruder
Anycubic
thingiverse
free
anycubic filament holder
...anycubic filament holder
thingiverse
anycubic filament holder
thingiverse
free
Cableholder Anycubic Mega
...cableholder anycubic mega
thingiverse
cableholder anycubic mega
thingiverse
free
AnyCubic Toolholder by WildManPrinting
...anycubic toolholder by wildmanprinting
thingiverse
anycubic i3 mega toolholder that clips on the side of the spool a-frame.
thingiverse
free
AnyCubic Funnel by phana007
...anycubic funnel by phana007
thingiverse
funnel for anycubic resin and also a reducer for a normal soda bottle.
thingiverse
free
Anycubic Kossel PID calibration
...ir mount:
kossel raspberry camera ir mount
extruder pid calibration.
simple extruder temperature calibration of your 3d printer.
thingiverse
free
anycubic mega i3
...anycubic mega i3
thingiverse
anycubic i3 mega/mega s led 30mm 10-14v 6500k
thingiverse
free
Handle for anycubic by cruiser7
...handle for anycubic by cruiser7
thingiverse
its easier to handle the cover of the anycubic mono x and wash&care
thingiverse
free
anycubic predator Printbed by Lihyon
...anycubic predator printbed by lihyon
thingiverse
anycubic predator printbed
thingiverse
free
Anycubic Predator Triggers by marcelcountry
...anycubic predator triggers by marcelcountry
thingiverse
anycubic predator triggers
thingiverse
free
support anycubic cable by sarpdental
...support anycubic cable by sarpdental
thingiverse
support anycubic cable
Flex
3ddd
$1
Flex
...flex
3ddd
flex , конференц-зал
кресло для переговоров
3ddd
$1
Flex — I Laccati
... i laccati
3ddd
flex , дверь
двери межкомнатные, окрашенные. flex, коллекция «i laccati»
3ddd
free
Flex Seating 6032
... конференц-зал , flex
кресло модульное, модель flex seating 6032
3ddd
free
TechnoGym Flex Posterior
... flex , тренажер
3ds max 2012 (v-ray) + fbx
technogym flex posterior
3ddd
$1
Банкетка Flex Team
... , flex team
http://www.abitant.com/products/banketka-flex-team-2014-kilt-pouf
3ddd
free
FLEX , I Laccati
...cati
3ddd
flex , i laccati
flex , i laccati
модель p 14 q stucco fiorentino decoro gigli
3ddd
$1
Metal lux / FLEX
...metal lux / flex
3ddd
metal lux
люстра metal lux flex.
turbosquid
$11
Stool Flex
...ty free 3d model stool flex for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1673813)
3ddd
$1
Flex by Skandiform
...flex by skandiform
3ddd
skandiform , стул
enjoy
turbosquid
$7
Flex Chair
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mega
3ddd
$1
BoConcept / Mega
...boconcept / mega
3ddd
boconcept
boconcept mega
3ddd
free
Angelo - Mega shoin
... mega shoin , shoin
angelo - mega shoin - 3dmax 2008
3ddd
$1
Комод MEGA
...вана по фото с учетом реальных размеров.
стек не сколапсен, есть возможность регулировки уровня сглаживания.
текстуры в архиве.
3ddd
$1
Hulsta / Mega-design
...hulsta / mega-design
3ddd
hulsta
hulsta mega-design
design_connected
$18
Tolomeo Mega
...
photo-realistic 3d models of the tolomeo mega floor lamps from artemide for 3d architectural and interior design presentations.
turbosquid
$119
Mega Soldier
... free 3d model mega soldier for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1148568)
turbosquid
$100
Mega Yacht
... free 3d model mega yacht for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1368903)
3ddd
$1
Massproductions Mega
... massproductions , mega
ширина: 180 см
глубина: 90 см
высота: 79 см
3d_export
$4
mega metro station
...mega metro station
3dexport
mega metro station. ready to game. thanks all downloaders!!
3ddd
$1
BAS Mega
...bas mega
3ddd
bas , ванна
ванна
Tpu
3d_export
$7
GEARBOX BUSHING PEUGEOT 307
...gearbox bushing peugeot 307 3dexport print material - elastan\tpu nozzle temperature - 230°с bed temperature - 100°с layer...
3d_export
$5
iphone 11 pro case
...or 6 filling: fill density: 15% pattern: grid material: tpu printing temperature: 238ºc printing plate temperature: 40 or 50ºc...
thingiverse
free
Chair TPU
...chair tpu
thingiverse
... tpu ...
thingiverse
free
Wasserauslauf TPU
...wasserauslauf tpu
thingiverse
wasserauslauf tpu
thingiverse
free
TPU-Coaster by 873chi
...oaster by 873chi
thingiverse
material = tpu
i made a separate type coaster.
since it is tpu, it has elasticity and is practical.
thingiverse
free
Laser HD TPU
...laser hd tpu
thingiverse
transtec laser hd tpu
thingiverse
free
TPU-Cube
...tpu-cube
thingiverse
foldable cube
thingiverse
free
Trampa Wand TPU
...trampa wand tpu
thingiverse
tpu cover, print base down with supports
thingiverse
free
athorbot extrudeur tpu
...athorbot extrudeur tpu
thingiverse
athorbot brother modif pour tpu ou flex
thingiverse
free
Nerf Dart TPU
...nerf dart tpu
thingiverse
nerf dart to be printed in tpu or other flexibles.
size 72x12mm
I3
3d_export
$10
suv i3
...suv i3
3dexport
suv i3 2013 series
3d_ocean
$89
BMW i3 2012
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 20143d model
...
cgstudio
.3ds .c4d .fbx .lwo .max .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20123d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2012 3d model, royalty free license available, instant download after purchase.
cg_studio
$99
BMW i3 20143d model
...tudio
.3ds .c4d .fbx .lwo .max .mb .obj - bmw i3 2014 3d model, royalty free license available, instant download after purchase.
humster3d
$75
3D model of BMW i3 2014
...
buy a detailed 3d model of bmw i3 2014 in various file formats. all our 3d models were created maximally close to the original.
humster3d
$40
3D model of Kitchen Set I3
...uy a detailed 3d model of kitchen set i3 in various file formats. all our 3d models were created maximally close to the original.
3d_ocean
$30
Kitchen set i3
...ensils oven plates shelves sink table ware
kitchen set i3 include 3d models: cooker, oven, sink, cupboards, table, chair, plates.
3d_ocean
$89
BMW i3 2014
...y, in real units of measurement, qualitatively and maximally close to the original. model formats: - *.max (3ds max 2008 scanl...
cg_studio
$99
BMW i3 Concept 20113d model
...i3
.3ds .c4d .fbx .lwo .max .obj - bmw i3 concept 2011 3d model, royalty free license available, instant download after purchase.
Extruder
3ddd
$1
Extruded Chair
...extruded chair
3ddd
extruded , tom dixon
inspired by tom dixon extruded chair
turbosquid
$15
Extruded Table
... extruded table for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1634137)
turbosquid
$2
3D Printer Extruder
...d
royalty free 3d model 3d printer extruder for download as on turbosquid: 3d models for games, architecture, videos. (1537359)
turbosquid
$1
Zombie extruded text
...oyalty free 3d model zombie extruded text for download as obj on turbosquid: 3d models for games, architecture, videos. (1322198)
turbosquid
$4
Extruder conical screw
...el extruder conical screw for download as sldpr, ige, and stl on turbosquid: 3d models for games, architecture, videos. (1524433)
turbosquid
$50
3d PRINTER - Extruder
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Extruded Table 2
...xtruded table 2 for download as blend, dae, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1621846)
turbosquid
$10
Maya Extrude Tool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
world earth extrude map
...world earth extrude map
3dexport
3ddd
$1
Simply Elegant Extruded Tree Coffee Table Design
...ble by link studios. the silhouette of a tree is visible at one angle, extruded from the surface to create the support structure.
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.