GrabCAD
Angle Screwdriver
by GrabCAD
Last crawled date: 1 year, 10 months ago
An interesting 3D model of an ANGLE SCREWDIVER, with an axial rotatable handle in steps of 30 degrees.
The hexagonal drive shaft has a width across flats of 6.35 mm.
The holder for the bits has an inner hexagon with a width across flats of 6.45 mm.
The bits are held in axial direction by a strong magnet.
Check this model in 3D viewer and have a look at the explosion view and the different sections.
A special thanks goes to: https://grabcad.com/alexander.kilian-1
for modeling the bevel gears with correct involute toothing and providing them as a STEP file.
The complete model (assembly) is available in the STEP format only.
The hexagonal drive shaft has a width across flats of 6.35 mm.
The holder for the bits has an inner hexagon with a width across flats of 6.45 mm.
The bits are held in axial direction by a strong magnet.
Check this model in 3D viewer and have a look at the explosion view and the different sections.
A special thanks goes to: https://grabcad.com/alexander.kilian-1
for modeling the bevel gears with correct involute toothing and providing them as a STEP file.
The complete model (assembly) is available in the STEP format only.
Similar models
grabcad
free
Three-Jaw Chuck
... users of »ptc creo parametric 2.0« and later versions.
unzip the (.7z) folder and use this new folder as your working directory.
grabcad
free
Conveyor
...: 600 mm
tilt angle: 25
designed to transport garbage or other raw materials
the tape has blades 200x30 and with a step of 300 mm
grabcad
free
Flat Plug Sleeve
...to a sheet metal part, which allows now a flat pattern of the bended part.
the model is available as two step-files (.stp) only.
grabcad
free
44° 182 mm longboard axel
...ad
this is a longboard axle with the kingpin angle of 44° and hanger width 182 mm. this also has bushings and screw nuts modeled
grabcad
free
DIN 6914 HEXAGON BOLTS.
...ere are washer din 6916 and nuts din 6915 that go with these will model them next
https://grabcad.com/library/din-6915-din-6916-1
grabcad
free
Honeycomb Rings
...of the ring is approx. 3.8 mm. version c: similar to version a, but only one row with 24...
grabcad
free
Stairs
...stairs
grabcad
usual stairs with 215 mm step height and 270 mm step width.
grabcad
free
Self-Clamping Wrench
...of theoretical values" of »metrical threads«
(in german language only, but individually editable).
thank you for attention!
grabcad
free
Drill Bit | 50 mm |Helix having point angle of 118 degrees|
...timum point angle for most of the materials. this drill bit is generally made up of high speed steel, which is hard but brittle.
grabcad
free
Staircase - Flush mount with glass guard
...l rise: 2880 [mm]
total run1: 1800 [mm]
total run2: 4280 [mm]
rise: 180 [mm]
run: 260 [mm]
angle: ~35 [deg]
step width: 1000 [mm]
Screwdriver
grabcad
free
screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
Screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
screwdrive
...screwdrive grabcad screwdriver ...
grabcad
free
Screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
Screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
Screwdriver
...screwdriver
grabcad
screwdriver
grabcad
free
Screwdriver
...screwdriver
grabcad
screwdriver
Angle
grabcad
free
Angles
...angles
grabcad
angles.
grabcad
free
Angle
...angle
grabcad
angle in solidworks
grabcad
free
angle
...angle
grabcad
angle iso
grabcad
free
Angle
...angle
grabcad
angle design
grabcad
free
Angles
...angles
grabcad
angles 5 to 115
grabcad
free
Angled Plate
...angled plate
grabcad
angled plate to machining with angle.
grabcad
free
ANGLE BRACKET
...ad
an angle bracket or angle brace or angle cleat is an l-shaped fastener used to join two parts generally at a 90 degree angle.
grabcad
free
Angles
...angles
grabcad
guerd
grabcad
free
Angle
...angle
grabcad
good
grabcad
free
angle
...angle
grabcad
cutting through