Anet A8 Direct Feed E3D Carriage Mount by CobratronicGB

Last crawled date: 3 years ago

This product & many more can be brought via our website at www.cobratronic.com
Anet Direct Feed E3D Carriage Mount
Motor mounted 90 degrees offset on X axis which gives easy front access to filament feeder
Motor weight centrally mounted directly above bearings
Heatsink fan mounted behind cooling fins to give improved vision
Side mounted Hotend fan to give improved hotend vision
Additional mounting points for bed sensor brackets
Mounting points for Black Semi Enclosed Drag Chain Carrier 10mm x 10mm.
Tidy Cable direction management
Before you ask yes built in PLA. Print PETG and ABS with no problem. If this mount gets that hot then you need to switch on your heat sink fan as the mounting area should always be cold unless you like blocked filament feed cold areas
Built for use with additional parts
E3D clone hotendhttps://www.amazon.co.uk/Finlon-Hotend-Extruder-Printer-Filament/dp/B0734MR3JR/ref=sr_1_1?rps=1&ie=UTF8&qid=1508671763&sr=8-1&keywords=e3d+v6&refinements=p_76%3A419158031
3D Printer MK8 Remote Extruder Right Handhttps://www.amazon.co.uk/Extruder-Accessories-Filament-Aluminum-Accessory/dp/B073YB25YV/ref=sr_1_8?s=industrial&ie=UTF8&qid=1508671519&sr=1-8&keywords=3D+Printer+MK8+Remote+Extruder
Heat sink Cooling Fanhttps://www.amazon.co.uk/gp/product/B018GFH6XO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Black Semi Enclosed Drag Chain Carrier 10mm x 10mmhttps://www.amazon.co.uk/gp/product/B008IBKSDW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Printer: Anet A8
Material: PLA
Extruder Temp: 195
Bed Temp: 60
Resolution: 0.2
Infill: 40%
Cooling: Yes, start at layer 4
Rafts: No
Supports: Yes
Support Type: Build platform Only
Support Infill:30%
Dense Infil: 60%
Horizontal Offset: 0.25
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1
Anet E3D Carriage Clamp
Use two M4 Socket Head Cap Screws
Printer: Anet A8
Material: PLA
Extruder Temp: 195
Bed Temp: 60
Resolution: 0.2
Infill: 50%
Cooling: Yes, start at Level 4
Rafts: No
Supports: No
X Axis Cable Tray Mount
Made from PLA to fit Black Semi Enclosed Drag Chain Carrier 10mm x 10mm.
Mounts to X Axis motor and includes Z axis end stop adjuster
Mounting holes for 10mm x 10mm Drag Chain Carrier
Holes for cable tie attachment
https://www.amazon.co.uk/gp/product/B008IBKSDW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Printer: Anet A8
Material: PLA
Extruder Temp: 195
Bed Temp: 60
Resolution: 0.2
Infill: 35%
Cooling: Yes, start at Level 4
Rafts: No
Supports: Yes.
Support Type: Normal
Support Infill:30%
Dense Infil: 60%
Horizontal Offset:0.25
Upper Vertical Separation Layers:1
Lower Vertical Separation Layers:1
Z End Stop Micro Switch Bracket
Taken from : https://www.thingiverse.com/thing:2050229/