Thingiverse
AMZ3D Spool wheel for 8mm-9mm rods (or under) by Stuffstufffstuff
by Thingiverse
Last crawled date: 3 years ago
This is a simple wheel that fits perfectly on the AMZ3D filament spools.
I was tired of having to print 5 hours for a complete spool that would do the whole width when you just need two wheels that fit correctly on each side.
It will fit tight. If you are having issues removing it, just use a flat screwdriver and slowly pry it. This is a 30-1h print depending on the speed. It is solid and does not take much plastic.
The hole is 10mm diameter...So I recommend you using 8mm rods but I guess 9mm rods will work too. (If you use 10mm rods, you will have to sand it to make it fit).
I was tired of having to print 5 hours for a complete spool that would do the whole width when you just need two wheels that fit correctly on each side.
It will fit tight. If you are having issues removing it, just use a flat screwdriver and slowly pry it. This is a 30-1h print depending on the speed. It is solid and does not take much plastic.
The hole is 10mm diameter...So I recommend you using 8mm rods but I guess 9mm rods will work too. (If you use 10mm rods, you will have to sand it to make it fit).
Similar models
thingiverse
free
Anet a8 spool holder for 8mm rod by Stuffstufffstuff
...e in the pictures)
compatible with bowden setup with extruder motor holder: https://www.thingiverse.com/thing:2798839
20% infill
thingiverse
free
Spool holder by thrasherht
...ve on hand.
included the step file from fusion 360.
picture shows just one, but you have to print two of these to make the stand.
thingiverse
free
HyperCube X axis insert for 8mm rod by Imberest
...mm rod instead of 10mm aluminium pipe. i have made this insert to fit 8mm rod in 10mm hole. i am thinking to upgrade the printer.
thingiverse
free
Spool Rack for 9mm Rod by steveho
...h diameters of 25mm to 70mm. the rod hole fits 9mm rods. i made this for my rigidbot but it would work on other printers as well.
thingiverse
free
Bushing for Spool (Filament) with Bearing by tuster
...ve a look http://www.thingiverse.com/thing:19015
check out http://www.thingiverse.com/thing:19016 for the 8mm rod mounting thing.
thingiverse
free
Super simple spool holder for Prusa i3 (Box frame) by ffleurey
...nd a piece of 8mm smooth rod. it works great.
i used 2 pieces of m10 threaded rod (16cm each) and about 40cm of 8mm smooth rod.
thingiverse
free
Spool holder for 8mm rods and bearings by timmygti
... recycle your stock bearings for 8mm rods and brocken rods to use them as a carrier for your spools, fits up to 45-55mm spools.
thingiverse
free
Hatchbox spool holder 8mm rod by fishbacon
... tiers to hold them. it's used with the rod that came with the anet a8. just print out two and then thread them onto the rod.
thingiverse
free
Spool Mount by Digger60
...will need:
2 - 608zz bearings
2 - 8mm nuts
1 - 8mm x 100mm threaded rod (length can vary depending on size spools)
1 - 8mm washer
thingiverse
free
8mm shaft collar by jc61990
...two halves of the wood collar together.
print with 2 shells and minimal infill. i got away with 15%.
it should be a snug fit.
Stuffstufffstuff
thingiverse
free
Headset hook for Storm Scout case by Stuffstufffstuff
...th a bar between 13-13.24mm height.
changed the design so that you just use a m4 screw to fix it down.
what you need:
1x m4-24mm+
thingiverse
free
Anet A8 Usb and key holder by Stuffstufffstuff
...icks under 5 cm. if you have the anet a8, this modification is for you. otherwise, be sure it fits your usb stick and your tool.
thingiverse
free
Cellphone stand by Stuffstufffstuff
...for angles over 80.
(my cellphone is 86mm width, 160mm height, 13mm depth)
wires can pass under the stand since there is an angle
thingiverse
free
E3D V6 Clone fan duct for E3D V6 carriage by Stuffstufffstuff
.... less noisy and half circle to be able to remove unwanted plastic on the nozzle.
link: https://www.thingiverse.com/thing:2832513
thingiverse
free
Slim Wallet for 6 cards or under by Stuffstufffstuff
...king on fixing some issues of this wallet such as1mm gap between the cap and frame after placing the screweasier removal of cards
thingiverse
free
Anet a8 spool holder for 8mm rod by Stuffstufffstuff
...e in the pictures)
compatible with bowden setup with extruder motor holder: https://www.thingiverse.com/thing:2798839
20% infill
thingiverse
free
E3D V6 Clone fan duct for E3D V6 carriage by Stuffstufffstuff
...es, it looks like a scorpion
link to the e3d v6 clonehttps://www.amazon.com/j-head-hotend-filament-extruder-printer/dp/b010mstvzo
thingiverse
free
Flipping Minimalist wallet for 6 cards by Stuffstufffstuff
...e somebody make it with a good printer! (mine has many issues)
i have been using this wallet for my 6 cards for the last 3 months
thingiverse
free
Anet A8 Bowden Extruder Mount for top spoolholder by Stuffstufffstuff
...uder to extruder with the bottom anet a8.
it should be just next to the spool holder you have.
if you have issues comment!
thanks
Amz3D
thingiverse
free
AMZ3D Hub by TropicalIgloo
...amz3d hub by tropicaligloo
thingiverse
this is a spool hub i made for the amazon amz3d filament rolls.
thingiverse
free
AMZ3D Filament Clip by misterjtc
...filament clip by misterjtc
thingiverse
this is a filament clip for amz3d 1.75mm pla filament.
it is a remix from walters design.
thingiverse
free
Filament Holder for AMZ3D by CharlesStudio
...er for amz3d by charlesstudio
thingiverse
spool holder for anet a8 printer.
it's designed for amz3d filament spool !
enjoy
thingiverse
free
AMZ3D Spool Spacer / Holder by jennellew
...his is a spool spacer for amz3d filaments for axles up to 9.5mm in diameter. it's been a couple years and still going strong.
thingiverse
free
32mm spool for 1kg AMZ3D Filament Spools by oberkorn
...2mm spool for 1kg amz3d filament spools by oberkorn
thingiverse
spool holder for the large spannerhands box for amz3d 1kg spools
thingiverse
free
AMZ3D PLA spool hub by mpkottawa
...la spools. the axle hole is about 8mm. the part that goes into the spool is about 31.5mm.
edit: made a bearing insert, new file
thingiverse
free
AMZ3D Filament Holder by DigitalOSH
... by digitalosh
thingiverse
made to clip on the back of a makerbot replicator mini, but feel free to remix it for your purposes.
thingiverse
free
AMZ3D Filament Clip by Vlexx
...ne my self. and it works better than the other ones ive used.
made for 1.75mm filament. i suggest printing it on its side.
enjoy!
thingiverse
free
Spool Support For Anycubic Spool Holder and AMZ3D Spools by Kobaratsu
... amz3d spools by kobaratsu
thingiverse
spool axis support to avoid jerks on spool, using anycubic spool holder and amz3d spools
thingiverse
free
AMZ3D Spool for Flash Forge Creator Pro by misterjtc
...ashforge creator pro.
this is meant to be printed as two pieces and then joined by welding or an adhesive.
main spool ø = 31 mm
9Mm
turbosquid
$13
9mm
...m
turbosquid
royalty free 3d model 9mm for download as blend on turbosquid: 3d models for games, architecture, videos. (1334940)
turbosquid
$20
9mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
9mm Bullet
... bullet
turbosquid
free 3d model 9mm bullet for download as on turbosquid: 3d models for games, architecture, videos. (1459083)
turbosquid
$12
9mm Round
...rbosquid
royalty free 3d model 9mm round for download as fbx on turbosquid: 3d models for games, architecture, videos. (1330531)
turbosquid
$30
P320 9MM
...d
royalty free 3d model p320 9mm for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1473307)
turbosquid
$5
9mm bullet
...oyalty free 3d model 9mm bullet for download as obj and blend on turbosquid: 3d models for games, architecture, videos. (1469310)
3d_export
$6
9mm parabellum
...9mm parabellum
3dexport
turbosquid
$5
9mm Pistol
...ty free 3d model 9mm pistol for download as obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1206742)
turbosquid
$5
9MM Sidearm
...ty free 3d model 9mm sidearm for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1312723)
turbosquid
$2
9mm Bullets
...y free 3d model 9mm bullets for download as obj, fbx, and dae on turbosquid: 3d models for games, architecture, videos. (1436589)
8Mm
turbosquid
$50
8MM CAMERA.max
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
kodak 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Brass Bush Bearing 8mm ID
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
wrench big collection from 8mm to 32mm
...llection from 8mm to 32mm for download as obj, fbx, and sldas on turbosquid: 3d models for games, architecture, videos. (1438111)
turbosquid
$1
Flexible Shaft Coupling 6mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$1
Flexible shaft coupling 5mm x 8mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
German WWII Breda MG-8mm Ammo Box (Low Poly)
...g-8mm ammo box (low poly) for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1395526)
3ddd
free
Treasures of the Sea
...treasures of the sea 3ddd бижутерия d=8mm ...
3d_export
$5
double thread screw
...thread length: 10 mm total length: 41 mm diameter: 8mm ...
3d_export
$5
large double thread screw
...thread length: 10 mm total length: 115 mm diameter: 8mm ...
Spool
3ddd
$1
spool c53301
...spool c53301
3ddd
spool
spool c53301 650х350х145
turbosquid
$3
Cable Spool
...royalty free 3d model cable spool for download as max and fbx on turbosquid: 3d models for games, architecture, videos. (1457009)
turbosquid
free
Pallets and Spool
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Spool of String
...ol of string pink for download as c4d, 3ds, fbx, obj, and stl on turbosquid: 3d models for games, architecture, videos. (1647892)
3ddd
$1
Подвесные светильники Spool
...ye/podvesnoy_svetilnik_spool_d320/ http://www.cosmorelax.ru/catalog/podvesnyye/podvesnoy_svetilnik_spool_d420/
3ddd
free
Spool 001 sofa
...spool 001 sofa
3ddd
roda
roda
collection spool
design rodolfo dordoni
dimensions:
lenght 90 cm
depth 94 cm
height 79 cm
turbosquid
$15
Roda Spool Sofa
...ee 3d model roda spool sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1502650)
turbosquid
$95
wire spools 3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
spool of TV wire
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$3
Simple and Fast Spool Holder
...ree 3d model simple and fast spool holder for download as stl on turbosquid: 3d models for games, architecture, videos. (1548546)
Rods
archibase_planet
free
Rod
...rod
archibase planet
shank rod
so rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Spinning rod
...g rod
archibase planet
spinning rod spinning rod fishing-rod
spinning rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
rod handle
...rod handle
3dexport
rod handle
3ddd
$1
bench with rods
...bench with rods
3ddd
скамейка
bench with rods
3ddd
$1
диван ROD
...диван rod
3ddd
rod , living divani
http://www.livingdivani.it/
3ddd
$1
кресло ROD
...кресло rod
3ddd
rod , living divani
http://www.livingdivani.it/
design_connected
$18
Rod Armchair
...rod armchair
designconnected
living divani rod armchair computer generated 3d model. designed by lissoni, piero.
archive3d
free
Rod 3D Model
...rod 3d model
archive3d
shank rod
so rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$15
Fishing rod
...urbosquid
royalty free 3d model fishing rod for download as on turbosquid: 3d models for games, architecture, videos. (1684756)
archive3d
free
Spinning rod 3D Model
...d spinning rod fishing-rod
spinning rod - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Wheel
archibase_planet
free
Wheel
...l steering control steering wheel
wheel ship steering wheel n060215 - 3d model (*.gsm+*.3ds+*.max) for exterior 3d visualization.
3d_ocean
$14
Wheel
...wheel
3docean
car rim car wheel rim wheel
high poly car wheel design. 16,840 polys
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
wheel
...wheel
3dexport
wheel
3d_export
free
Wheel
...wheel
3dexport
wheel
3d_export
$5
wheel
...wheel
3dexport
wheel for car.
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel
3d_export
$5
wheel
...wheel
3dexport
car wheel