Thingiverse
Amsterdamman's 2mm lowered nozzle mount for Ormerod by HandlaidTracks-3DprintedTrains
by Thingiverse
Last crawled date: 3 years, 1 month ago
This is my 2mm lowered rermix of the Ormerod1 or Ormerod2 nozzle mount. Effectively raising the sensor 2mm as compared to the nozzle.
After a few x-carriage collisions with bridging prints I could have figured out how to improve the print so the bridge was even better, but I decided to first make collisions much less likely since the print was still good enough for my purposes. The collision is what destroyed the print.
This will also lower your Z height when the sensor reads between 500-700 and I now use a Z height of 0.5 for my home point which is a effective sensor height of 2.5mm above the bed. My current config.g probe height is: G31 Z0.5 P570
After a few x-carriage collisions with bridging prints I could have figured out how to improve the print so the bridge was even better, but I decided to first make collisions much less likely since the print was still good enough for my purposes. The collision is what destroyed the print.
This will also lower your Z height when the sensor reads between 500-700 and I now use a Z height of 0.5 for my home point which is a effective sensor height of 2.5mm above the bed. My current config.g probe height is: G31 Z0.5 P570
Similar models
thingiverse
free
EZABL Sensor Placement Assistant by DanTexasMan
...rt.
the difference in the low part vs the high part is 2mm. that is the recommended height for the sensor to be above the nozzle.
thingiverse
free
Anet A8 12mm Z Probe Mount by canumovespenny
... a custom heat-shield out of hvac steel to protect the plastic from the hot end.
offset:
21 mm left of nozzle
19 mm behind nozzle
thingiverse
free
Modular IR sensor by DC42 Titan Aero mount by rdhoke
... play if it was struck by print and heat. you could print out of anything that can handle some heat as it is close to the hotend.
thingiverse
free
calibrate z axis & auto level sensor .. by yamaren
...gher than nozzle
14mm height for nozzle , 15mm for level sensor ..
from the other side you can adjust the 2 z motors with bed ..
thingiverse
free
Sensor mount 18mm by macaron16
... to the extruder.
now, i have less issues when i start printing and i don't need to find at every print, a correct z offset.
thingiverse
free
Modular Hotend Mount for Prometheus V2 Hotend by Xanthux
...r for unobstructed printing from sensor. added the following part with notch 2mm recessed ledge. e3d_bowden_mount_b_8.2mm.stl
thingiverse
free
Scalar M Z Axis - for 10mm Bars with T8 Lead Screw by s3rkan
...ct is not decreased until i switched from direct drive to bowden system. now my wobbles are disappeared and i can print faster :)
thingiverse
free
mini height sensor board - Differential IR Z probe mount for E3d Chimera by iwant3d
... it's homing the hotend will be 2mm away from the heatbed but once the print starts the hotend will be at the correct height.
thingiverse
free
BL Touch Mount for Dual Bowden A8 by 8SquareFeet
...//www.thingiverse.com/thing:1733096
i'll add some pictures of the mount on my machine shortly.
edit: i added some pictures.
thingiverse
free
Flsun i3 autolevel sensor mount upgraded for 2mm glass by Laca
...ot working and can't adjust lower position. with this mount can adjust lower and function still avaiable and air went better.
Amsterdamman
thingiverse
free
Amsterdamman's Small modular tubes by HandlaidTracks-3DprintedTrains
...odular tubes by handlaidtracks-3dprintedtrains
thingiverse
nesting modular tube system to make larger objects without fasteners.
thingiverse
free
Freestanding Mirror Angled Support by The Amsterdamman by HandlaidTracks-3DprintedTrains
...lling over. the angle can help to keep the mirror turned slightly but does not prevent the mirror from standing flat to the wall.
thingiverse
free
Amsterdamman's Ormerod hot bed indicator light cover by HandlaidTracks-3DprintedTrains
...d hot bed. after an injury left me sensitive to optic nerve migraines i block led light sources such as on the hot bed indicator.
thingiverse
free
Small Box with Round Corners by Amsterdamman by HandlaidTracks-3DprintedTrains
...r top and a slightly larger box since the fit changed using different colored filaments. 0.30mm smaller top and 0.30mm larger box
thingiverse
free
Amsterdamman's Large 1kg Filament Spool with 8mm bearing ends by HandlaidTracks-3DprintedTrains
...p" to "from the back" which seems a better method since it keeps a slight consistent tension on the filament feed.
thingiverse
free
Amsterdamman's Square upper Z mount bracket for Reprap's Ormerod2 by HandlaidTracks-3DprintedTrains
...nts fine and looks about the same. no functional changes to the part, this is just a simpler print and one my machine can create.
thingiverse
free
Amsterdamman's remix of Jstck's Extended Ormerod Z-nut trap by HandlaidTracks-3DprintedTrains
...rap was too loose. i opened the m5 nut trap wider and also removed the flare from the m3 nut trap and tightened it very slightly.
thingiverse
free
Amsterdamman's tall nosed remix of iamburny's extruder gears for Ormerod by HandlaidTracks-3DprintedTrains
... spacer nose to the top sides. if your z home is very close the hex head hole may need to be cleaned as it is a fairly tight fit.
thingiverse
free
Amsterdamman's Ormerod Y carriage front bearing support by HandlaidTracks-3DprintedTrains
...he bolt towards the front and the ormerod2 with the bolt towards the back, but i've only installed it on the ormerod1 so far.
Handlaidtracks
thingiverse
free
Amsterdamman's Small modular tubes by HandlaidTracks-3DprintedTrains
...odular tubes by handlaidtracks-3dprintedtrains
thingiverse
nesting modular tube system to make larger objects without fasteners.
thingiverse
free
Freestanding Mirror Angled Support by The Amsterdamman by HandlaidTracks-3DprintedTrains
...lling over. the angle can help to keep the mirror turned slightly but does not prevent the mirror from standing flat to the wall.
thingiverse
free
Amsterdamman's Ormerod hot bed indicator light cover by HandlaidTracks-3DprintedTrains
...d hot bed. after an injury left me sensitive to optic nerve migraines i block led light sources such as on the hot bed indicator.
thingiverse
free
Small Box with Round Corners by Amsterdamman by HandlaidTracks-3DprintedTrains
...r top and a slightly larger box since the fit changed using different colored filaments. 0.30mm smaller top and 0.30mm larger box
thingiverse
free
N Scale Re-Railer by HandlaidTracks-3DprintedTrains
...ease check out my youtube channel: handlaid tracks and 3d printed trains https://www.youtube.com/channel/ucev1bdm1youfrrjdjz6mmva
thingiverse
free
Appjaws' Anti vibration and noise feet stands for Ormerod by HandlaidTracks-3DprintedTrains
... one each for under the y and z motors.
thanks again appjaws for making these great additions to a great printer!
buuuuy: reprap!
thingiverse
free
One Piece Airplane by HandlaidTracks-3DprintedTrains
...best used on a grass field free of obstacles. nylon would be a better choice. see some flights here: https://youtu.be/b5z2shooaqe
thingiverse
free
Amsterdamman's Square upper Z mount bracket for Reprap's Ormerod2 by HandlaidTracks-3DprintedTrains
...nts fine and looks about the same. no functional changes to the part, this is just a simpler print and one my machine can create.
thingiverse
free
3D Printer Test Gap Gauges For 1-3mm by HandlaidTracks-3DprintedTrains
...w one, but you can modify them both if needed. you can watch my youtube video about the gauges here: https://youtu.be/oq9bugofilo
thingiverse
free
Amsterdamman's remix of Jstck's Extended Ormerod Z-nut trap by HandlaidTracks-3DprintedTrains
...rap was too loose. i opened the m5 nut trap wider and also removed the flare from the m3 nut trap and tightened it very slightly.
3Dprintedtrains
thingiverse
free
Amsterdamman's Small modular tubes by HandlaidTracks-3DprintedTrains
...odular tubes by handlaidtracks-3dprintedtrains
thingiverse
nesting modular tube system to make larger objects without fasteners.
thingiverse
free
Freestanding Mirror Angled Support by The Amsterdamman by HandlaidTracks-3DprintedTrains
...lling over. the angle can help to keep the mirror turned slightly but does not prevent the mirror from standing flat to the wall.
thingiverse
free
Amsterdamman's Ormerod hot bed indicator light cover by HandlaidTracks-3DprintedTrains
...d hot bed. after an injury left me sensitive to optic nerve migraines i block led light sources such as on the hot bed indicator.
thingiverse
free
Small Box with Round Corners by Amsterdamman by HandlaidTracks-3DprintedTrains
...r top and a slightly larger box since the fit changed using different colored filaments. 0.30mm smaller top and 0.30mm larger box
thingiverse
free
N Scale Re-Railer by HandlaidTracks-3DprintedTrains
...ease check out my youtube channel: handlaid tracks and 3d printed trains https://www.youtube.com/channel/ucev1bdm1youfrrjdjz6mmva
thingiverse
free
Appjaws' Anti vibration and noise feet stands for Ormerod by HandlaidTracks-3DprintedTrains
... one each for under the y and z motors.
thanks again appjaws for making these great additions to a great printer!
buuuuy: reprap!
thingiverse
free
One Piece Airplane by HandlaidTracks-3DprintedTrains
...best used on a grass field free of obstacles. nylon would be a better choice. see some flights here: https://youtu.be/b5z2shooaqe
thingiverse
free
Amsterdamman's Square upper Z mount bracket for Reprap's Ormerod2 by HandlaidTracks-3DprintedTrains
...nts fine and looks about the same. no functional changes to the part, this is just a simpler print and one my machine can create.
thingiverse
free
3D Printer Test Gap Gauges For 1-3mm by HandlaidTracks-3DprintedTrains
...w one, but you can modify them both if needed. you can watch my youtube video about the gauges here: https://youtu.be/oq9bugofilo
thingiverse
free
Amsterdamman's remix of Jstck's Extended Ormerod Z-nut trap by HandlaidTracks-3DprintedTrains
...rap was too loose. i opened the m5 nut trap wider and also removed the flare from the m3 nut trap and tightened it very slightly.
Ormerod
thingiverse
free
Ormerod Z spool by alexgibson
...t captures the z leadscrew and allows the spool to sit above the x carriage - especially useful on my extended ormerod - morerod.
thingiverse
free
ormerod 2 front legs by Le4fy
...ormerod 2 front legs by le4fy
thingiverse
ormerod 2 chunky front legs
thingiverse
free
E3D Ormerod Adapter by Steffen_Kautz
...e3d ormerod adapter by steffen_kautz
thingiverse
just for testing...
thingiverse
free
ormerod 2 X carriage by Le4fy
...ormerod 2 x carriage by le4fy
thingiverse
ormerod 2 x carriage i changed a few things mainly the way the bearing is held.
thingiverse
free
Ormerod PanelDue mounting bracket by 3jimd
...acket by 3jimd
thingiverse
this is a bracket and hinge for mounting dc42's paneldue lcd control panel on the reprap ormerod.
thingiverse
free
X-Carriage Ormerod 3D Printer by adsoftware
...x-carriage ormerod 3d printer by adsoftware
thingiverse
this is the x-carriage of the ormerod 3d printer from rapreppro.
thingiverse
free
Toy Ormerod by Ergomanina
...ave fun.
thanx
p.s. this is just a toy / mode,l and shares a likeness with the ormerod one, and is not a accurate reproduction.
thingiverse
free
Ormerod 2.. 4 point bed by Le4fy
...ormerod 2.. 4 point bed by le4fy
thingiverse
ormerod 2.. 4 point bed
this thing is solid and has zero bend in it..
thingiverse
free
ormerod gear cover by canibalu
...ormerod gear cover by canibalu
thingiverse
minimalist and useful to keep the filament out of the gears :)
thingiverse
free
Ormerod sized filament spool by dingotush
...es supplied with the ormerod. inspired by film and tape reels coupled with the need to be able to see how much filament was left.
2Mm
turbosquid
$5
ETERNITY 2MM
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
Real spur gear 2mm module - 25 teeth
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Low poly 10 standard C profiles with thickness less than 2mm Low-poly
...low-poly 3d model for download as blend, blend, gltf, and stl on turbosquid: 3d models for games, architecture, videos. (1594254)
turbosquid
$10
Low poly 43 standard C Profiles with thickness more than 2mm
...ferent c profiles for download as blend, blend, gltf, and stl on turbosquid: 3d models for games, architecture, videos. (1589928)
3d_export
$5
3D Beer Bottle Storage Container
...container 3dexport full-size. 230mm tall x 58mm wide x 2mm thick. easy to print. 2...
3d_export
$15
ring ak 4
...18к-6,05 / 14к-5,05 / 925-4,07<br>gems 1,7mm-40pcs / 2,5mm-8pcs / 2mm2pcs / 1,6mm-1pc<br>pearl...
3d_export
$26
metal grille door aisi304 with air filter 600x500x55mm
...door, material aisi 304 sheet plate thickness 1,5 - 2mm<br>dimension 500 x 600 x 55...
3d_export
$15
ring perlanddiamonds
...ring perlanddiamonds 3dexport perl - 12-13mm<br>gemstones:<br>2mm - 30<br>1mm - 177<br>size 17.5<br>gold 14k ~ 10g<br>silver ~...
3ddd
$1
Topoo Forest Whisper TP-SC009
...deco dining chair for home материал - stainless steel 304#/2mm thk,mirror polished размеры - 640 x 550 x 760mm...
3d_export
$5
flower earing
...flower earing 3dexport this earing have 7 stones with 2mm diameter, they are two different earing, you should copy...
Nozzle
3d_export
$5
nozzle
...nozzle
3dexport
3d_export
$49
fuel nozzles
...fuel nozzles
3dexport
fuel nozzles 3d model. include max, obj, fbx files.
archive3d
free
Nozzle 3D Model
...archive3d
nozzle hair-drier ware
nozzle - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$25
Pirouette Nozzle
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Fuel Nozzle
...model fuel nozzle for download as c4d, fbx, obj, 3ds, and stl on turbosquid: 3d models for games, architecture, videos. (1672732)
turbosquid
$8
Aeration Nozzles
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
laval airjet nozzle
...laval airjet nozzle
3dexport
a simple modified laval nozzle (airjet shooter) for sorting purposes.
3d_export
$36
Gas nozzle 3D Model
... 3d model
3dexport
gas pump nozzle dispenser filling station petrol fuel spout tank gun
gas nozzle 3d model tartino 1945 3dexport
turbosquid
$10
Diecast Jet nozzle
... free 3d model diecast jet nozzle for download as obj and stl on turbosquid: 3d models for games, architecture, videos. (1425990)
turbosquid
$39
Rocket nozzle, supressor.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Lowered
turbosquid
$500
Lower Manhattan
...squid
royalty free 3d model lower manhattan for download as on turbosquid: 3d models for games, architecture, videos. (1488281)
turbosquid
$12
Lower Back
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$5
Lower Floor table
...lower floor table
3docean
floortable lower
created in 3dsmax2011/vray1.5 and available in all multiple formats.
3d_export
$6
ar-15 lower receiver
...ar-15 lower receiver
3dexport
ar15 lower receiver
3d_export
$19
Lower back machine
...lower back machine
3dexport
turbosquid
free
Upper and Lower Teeth
...ree 3d model upper and lower teeth for download as ma and obj on turbosquid: 3d models for games, architecture, videos. (1636970)
turbosquid
$100
Lower Manhattan Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Lower Second Premolar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Lower First Premolar
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$18
Lower Leteral Incisor
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Mount
3d_export
free
mounting bracket
...mounting plate is the portion of a hinge that attaches to the wood. mounting plates can be used indoors, cabinetry and furniture.
turbosquid
$2
MOUNTING
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mounts
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Mount Fuji
...fuji
turbosquid
free 3d model mount fuji for download as obj on turbosquid: 3d models for games, architecture, videos. (1579977)
3d_export
$5
Headphone mount LR
...headphone mount lr
3dexport
headphone mount l+r
turbosquid
$39
Mount rainier
...quid
royalty free 3d model mount rainier for download as fbx on turbosquid: 3d models for games, architecture, videos. (1492586)
turbosquid
$5
pipe mounting
...quid
royalty free 3d model pipe mounting for download as obj on turbosquid: 3d models for games, architecture, videos. (1293744)
turbosquid
$3
Mounting Tires
...uid
royalty free 3d model mounting tires for download as fbx on turbosquid: 3d models for games, architecture, videos. (1708511)
3d_export
$5
Magnetic GoPro Mount
...pro mount
3dexport
cool magnetic mount for gopro. allows you to mount the camera on flat metal surfaces and get exclusive shots.
turbosquid
$5
Stone Mount
...ty free 3d model stone mount for download as ma, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1370306)