Alunar M508 X Stop Replacement (stock OEM) by mmotley

Last crawled date: 3 years ago

This is the rectangular bracket that holds the X stop switch on an Alunar M508. It's just like the stock part.
The stock one is acrylic, and the tiny screws that held the switch in place eventually stripped. I tried replacing them with long 2mm bolts and nuts, but ended up shattering the acrylic when tightening up the nuts.
In case yours is in the same situation, you can print a replacement.
I've uploaded two versions. One that should work with the stock 2mm wood-style screws (untested), the other for using 2mm machine screw with 2mm nut; it has slightly bigger holes where the switch mounts. You'll need a fairly long screw, I used 2mm x 19mm (all I had that was long enough) but a 2mm x 15 or so should also work.