Aluminum Mallard by PanzerMajier

Last crawled date: 3 years, 4 months ago

I wanted to build an Aluminum Mallard, but none of the ones I found had all the details that I wanted. I think GreeblerElf did a great job on the Mallard so I decided to use his as a base and go from there.
I wanted a high res model so many of the parts are designed with DLP printing in mind. Some are very small and may not work out on a FDM printer.
I would like to make it as game accurate as possible, but the game itself has issues between the schematics and images and also does not show some parts of the ship, so some interpretation is necessary.
changelog:
All files scaled up 25x, this makes the model about 200mm long when complete.
Cut the vent details from the body to make it easier to print.
Built a part for the reactor (hump in between the rear landing gear)
Built a ramp and pistons as these were missing from the original model
Made new phasers
Made new landing gear. You will need a 3mm diameter rod to tie top and bottom together (I used whatever I had around and just drilled holes out to fit.)
Thanks to GreeblerElf for the original.