Thingiverse
Alumimaker 2 by Achase79
by Thingiverse
Last crawled date: 3 years ago
Video of it printing here: https://youtu.be/bAI9mNnLWFo . I still had a bit of wiring to clean up, and I'll be reprinting the blower fan mounts in black. There's also a little bit of stringing; I was still tuning the retraction.
This is an Ultimaker 2 derivative called the Alumimaker 2. It includes several design improvements, but most importantly, being made with 2020 extrusion, it is easy to modify and expand the build volume (easiest in Z, but also easy in X and Y.) I decided to design this because the Ultimaker 2 has received great reviews, I wanted to experiment with their motion system, and I wanted a system that I could easily upgrade to dual extrusion. This printer uses a number of stock Ultimaker 2 parts, leveraging a known good design.
Improvements
=====
Easily modifiable/upgradable chasis
More rigid frame
Direct drive motors eliminate compounded backlash in X & Y
Grub screws on radial bearings eliminate linear shaft displacement
Improved electronics (Smoothieboard derivative w/ DRV8825)
Increased Z build height
Less expensive
Specs
=====
External Dimensions: 340 x 350 x 470
Bowden extruder (Stock Ultimaker 2 or a different one)
Build Volume: 225 x 230 x 320 for this build, but easily expandable
This build is single-extrusion, but there’s a mount on the print head for another hot end; dual extrusion is trivial to set up.
Print speed: 30-300mm/s
Heated bed
Smoothieware-compatible electronics.
This is a work in progress. I'm putting up a build log at https://sites.google.com/site/alumimaker2/build
More photos at https://flic.kr/ps/2Zb9za
I posted a BOM and some more description here: http://www.reddit.com/r/3Dprinting/comments/2rzjwc/misumi_usa_contest/cob4802
This is an Ultimaker 2 derivative called the Alumimaker 2. It includes several design improvements, but most importantly, being made with 2020 extrusion, it is easy to modify and expand the build volume (easiest in Z, but also easy in X and Y.) I decided to design this because the Ultimaker 2 has received great reviews, I wanted to experiment with their motion system, and I wanted a system that I could easily upgrade to dual extrusion. This printer uses a number of stock Ultimaker 2 parts, leveraging a known good design.
Improvements
=====
Easily modifiable/upgradable chasis
More rigid frame
Direct drive motors eliminate compounded backlash in X & Y
Grub screws on radial bearings eliminate linear shaft displacement
Improved electronics (Smoothieboard derivative w/ DRV8825)
Increased Z build height
Less expensive
Specs
=====
External Dimensions: 340 x 350 x 470
Bowden extruder (Stock Ultimaker 2 or a different one)
Build Volume: 225 x 230 x 320 for this build, but easily expandable
This build is single-extrusion, but there’s a mount on the print head for another hot end; dual extrusion is trivial to set up.
Print speed: 30-300mm/s
Heated bed
Smoothieware-compatible electronics.
This is a work in progress. I'm putting up a build log at https://sites.google.com/site/alumimaker2/build
More photos at https://flic.kr/ps/2Zb9za
I posted a BOM and some more description here: http://www.reddit.com/r/3Dprinting/comments/2rzjwc/misumi_usa_contest/cob4802
Similar models
thingiverse
free
Mark2 Dock for UM2 Aluminum Clone by apssloan
...e it was clashing with the y-axis rod for the head. i have now printed and fitted this part and have the mark-2 upgrade working.
thingiverse
free
Mark2 Ultimaker2 dual extrusion alternative rail dock by UltiArjan
...c-tool-changer.com/
questions? ask here;https://ultimaker.com/en/community/48788-ultimaker-mark2-the-smart-dual-extrusion-upgrade
thingiverse
free
Pen mount for the Mark2 dual extrusion system. by UltiArjan
... dirty trick by setting the bed to 25c and the extruders to 40c. the firmware has a protection not to extrude at these low temps.
thingiverse
free
DXU - Dual Extrusion Upgrade for UM2+ by HeyVye
...e modified based on the mark2 profiles by tinkergnome and foehnsturm. - used mark2tweaks plugin for cura by krys lawrence.
thingiverse
free
Ultimaker 2 Geared Feeder Mounting Plate by tylerecouture
...s don't line up perfectly because i couldn't find the drawings... but it was close enough for me. motor holes are exact.
thingiverse
free
Ultimaker 2 Aluminum Extrusion Z Stop by jffry7
...for those using the headted bed upgrade for umo where the alu bed has a different position for the screw that touches the z stop.
grabcad
free
X-Carve DIY Upgrade
.... stable and smooth
- frame more stronger with v-slot 2040
x-carve diy version 1 here:
https://grabcad.com/library/x-carve-diy-1
grabcad
free
Ultimaker 2 Extended Aluminum Extrusion Clone
...e and for more 3d printing services please send me a message or visit my etsy webpage:
https://www.etsy.com/shop/3dprintingexpert
thingiverse
free
Mini MrJaws Dual Extrusion by Nicolinux
... extrusion. the pictured one was printed on an ultimaker 3
here is a timelapse of the remix creation:https://youtu.be/7hezlrfsts8
thingiverse
free
Ultimaker X(2X), Y(2X), Z by carljones
...ultimaker x(2x), y(2x), z by carljones
thingiverse
ultimaker with twice the x,y build envelope keeping z standard
Alumimaker
thingiverse
free
Chimera printable clone by NGR923
...was thinked to br mount on a ultimaker or alumimaker with a interaxle spacing of 18,95 mm. this can...
thingiverse
free
CL-260 Printer sliding block ultimaker knockoff belt tensioner by Simhopp
...is chinese knockoff of ultimaker, and looks similar to alumimaker http://www.aliexpress.com/store/1828072 with 8mm axis rods with 11mm copper bushings....
Achase79
thingiverse
free
Guatemala Pig by Achase79
... pig i bought in guatemala. it has a drawer which pulls out of its side.
http://youtu.be/mjcwqyym3qkhttp://youtu.be/j71ris9ma1y
thingiverse
free
12mm rod holder mounts w/ M5 SHSC by Achase79
... has a 13mm bore with a m5 compression bolt to bring it down to < 12mm, m5 screw holes to mount to 2020 extrusion or whatever.
thingiverse
free
608zz pillow block mount (same footprint as KP08) by Achase79
...xtra rigidity, you can just about fit 2 608zz bearings inside, since the kp08 footprint is 13mm wide and the 608zzs are 7mm wide.
thingiverse
free
Modifications for Bind-Reducing X-ends with Makers Tool Works Leadscrews For MendelMax and 10mm Rods by Achase79
...th upper motor mounts in my mendelmax 2, so i thought i'd give it a try, and it works pretty well with the aluminum couplers.
thingiverse
free
I3 MK3 Clone (Haribo, Self-Sourced) by Achase79
...ptical endstop runout detection, i can post my hacky firmware. it seems to work, but has not been extensively thought out/tested.
2
design_connected
$11
No 2
...no 2
designconnected
sibast no 2 computer generated 3d model. designed by sibast, helge.
turbosquid
$6
Cliff Rock 2-2
...uid
royalty free 3d model cliff rock 2-2 for download as obj on turbosquid: 3d models for games, architecture, videos. (1619161)
turbosquid
$29
Book variation 2 2
...3d model book variation 2 2 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1366868)
turbosquid
$22
Classic baluster (2) (2)
...assic baluster (2) (2) for download as max, obj, fbx, and stl on turbosquid: 3d models for games, architecture, videos. (1483789)
turbosquid
$99
Smilodon 2 Pose 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$20
Barrel Barricade 2-2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Wall Trophy (2) (2)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Tire label 2 of 2
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур
3ddd
free
Кровать, 2 тумбочки, 2 светильника
...кровать, 2 тумбочки, 2 светильника
3ddd
кровать, 2 тумбочки, 2 светильника
нормальное качество
формат 3ds max
без текстур