Alien design Sheet-Metal Folding

Last crawled date: 1 year, 11 months ago

With 2 production steps , and too simple set-up procedure , here is the sheet metal of 2.5 mm, fillet ends and with simple finishing, will be every thing safe of Crew hands.
For disassembling the plate simple make a hole in any side for One can get his hand to the butterfly nut.
but for one time fix on the Rail during the whole mission , bolt and nut, fastener on the Rail , is better.

Descriptions on images in the PDF files.
Legs will be marked with numbers.

Laser cut and fold will be the manufacturing will be ready,
leg 1 = 185 gram, leg 2 = 188 gram, leg 3 = 217 gram, leg 4 = 186 gram
Material = Aluminum Alloy 1100
thickness = 2.5 mm
screws are two M8 with butterfly nut.
The legs are numbered and everyone is special


I have penetrated the cavity down the experiment volume , because i did not see any use of it only for putting fasteners for the experiment volume. so if there is a problem i have did me second design . ..

I have done the forces and stress analysis on both g = 9.8 and g = 1
simulation the real environment of ISS.
regarding simulation of vertical force,that could be Concluded because i have made the full Volume of same material ,Aluminum Alloy 1100 and due to its weight, in the g = 9.8 m/s^2 simulation, that the force is applied . in the simulation results. Anyway, the structure is so strong to a vertical force.

the assembly in the videos below :
https://youtu.be/jjfV8RDvd7Y

https://youtu.be/Rp5nDKG1RMg

Now i will submit the second design , which is Simple Sheet metal approach.


10:04:2016
Germany