GrabCAD
Ajour XTREME BOXX 4150 workstation
by GrabCAD
Last crawled date: 1 year, 11 months ago
Added high-resolution 7016 * 4961, they are placed in the archive AjourIMG_7016х4961. Pleasant viewing!
“The challenge is to redesign the enclosure for the 3DBOXX 4150 XTREME workstation”
The goal in this project is implemented in the following way:
The classical form of the workstation chassis kept virtually unchanged. Design intent is aimed at giving the usual mind ease and an unusual texture of the surface. When this is fully provided with cooling of hot surfaces (chassis, aerodynamics, an effective technological inlets and outlets, cleaning air from dust).
The design features.
Traditional rectangular building has two front panels in the form of protruding cylindrical segments. At the top of the access to the optical drive and an external connection for the HDD and SSD. The perforated slotted holes of various sizes in the form of the stylized logo BOXX. Inner panel fixed.
The outer panel is the whole area of the outer surface of the slotted holes that create a light airy openwork pattern. The logo is at the top of the BOXX. On the top face are the power button, lifting the lid top dock station and lower the blinds. The blind is lowered when you need access to an optical drive and docking stations.
The right pane has a vertical array of holes, located at the front of the chassis for the incoming air in the area where water cooling radiators. The remaining surface has a transparent opening in the form of the stylized logo BOXX. Through the opening you can see the internal equipment.
Rear panel, top and bottom panels also have openwork holes perforating the same form. Openings on the top and bottom panels are the filters that are cleaned up without opening the chassis.
The top panel in the front of the body is covered with a lid, dock station. The upper part displays USB 3.0, USB 2.0 card reader connector for iPhone, Android and other smartphones, microphone and headphones socket, Reset button. In the dock is mounted 7 "display. Information is displayed on the status of the devices (CPU temperature, HDD coolers, turnovers) and the ability to manage these settings.
Number of slots-12 USB (shareware showing on the top of the back panel, 4-8).
The design features.
Body material: aluminum. The obverse surface polished, Matt, has a coating of different colors or white. As an exclusive option to apply high-quality texture depicting natural skin mammals, reptiles or wild animal furs.
Various combinations of texture images in one case.
Thanks
My sincere thanks to the community and all its members for the opportunity to use their experience as a source of inspiration in creating this project. My thanks also to the customer in this job for the opportunity to participate in the work and the pleasure I received.
If the members of the community have expressed their opinion about my work, I will also be grateful for feedback and criticism.
В этом проекте поставленная задача реализована следующим образом:
Классическая форма корпуса рабочей станции сохранена практически без изменений. Дизайнерский замысел направлен на придание привычному виду легкости и необычной фактуры поверхности. При этом полностью обеспечено охлаждение нагревающихся поверхностей (эффективная аэродинамика внутри корпуса, технологические отверстия для входа и выхода воздуха, очистка воздуха от пыли).
Конструктивные особенности.
Традиционный прямоугольный корпус имеет две лицевые панели в виде выступающих цилиндрических сегментов. В верхней части панели организован доступ к оптическому приводу и док станции для внешнего подсоединения HDD и SSD. Панель перфорирована щелевыми отверстиями различного размера в форме стилизованного логотипа BOXX. Внутренняя панель неподвижная.
Внешняя панель имеет по всей площади наружной поверхности щелевые отверстия, создающие легкий воздушный ажурный рисунок. В верней части расположен логотип BOXX. На верхней грани располагаются кнопки включения, подъема крышки верхней док станции и опускания шторки. Шторка опускается при необходимости доступа к оптическому приводу и док станции.
Правая панель имеет вертикальный массив отверстий, расположенный в передней части корпуса для пропуска входящего воздуха в зону расположения радиаторов системы водяного охлаждения. Оставшаяся поверхность имеет прозрачный проем в форме стилизованного логотипа BOXX. Сквозь проем видно внутреннее оборудование.
Задняя панель, верхняя и нижняя панели также имеют ажурную перфорацию из отверстий той же формы. Проемы на верхней и нижней панелях защищены фильтрами, которые очищаются без открывания корпуса.
На верхней панели в передней части корпуса расположена прикрытая крышкой док станция. На верхнюю часть выведены гнезда USB 3.0, USB 2.0, card reader, коннектор для iPhon, Android, и прочих смартфонов, гнезда микрофона и наушников, кнопка Reset. В крышку док станции вмонтирован 7” дисплей. На дисплей выводится информация о состоянии устройств (температура процессора, жестких дисков, обороты кулеров) и возможность управления этими параметрами.
Число гнезд USB всего – 12 (условно показаны на верхней панели 4, на задней панели – 8)
Особенности дизайна.
Материал корпуса – алюминий. Лицевая поверхность полированная, матированная, имеет покрытие различного цвета или без покраски.
В качестве эксклюзивного варианта предлагается нанесение высококачественных текстур изображающих натуральную кожу млекопитающих, рептилий или меха диких животных. Возможны сочетания различных текстурных рисунков в одном корпусе.
Благодарности
Приношу искреннюю благодарность сообществу и всем ее членам за возможность использовать их наработки в качестве источника вдохновения при создании этого проекта. Также приношу благодарность заказчику данного задания за возможность принять участие в конкурсной работе и то удовольствие, которое я получил при этом.
Если члены сообщества выразят свое мнение по поводу моей работы, я также буду им благодарен за отзывы и критику.
“The challenge is to redesign the enclosure for the 3DBOXX 4150 XTREME workstation”
The goal in this project is implemented in the following way:
The classical form of the workstation chassis kept virtually unchanged. Design intent is aimed at giving the usual mind ease and an unusual texture of the surface. When this is fully provided with cooling of hot surfaces (chassis, aerodynamics, an effective technological inlets and outlets, cleaning air from dust).
The design features.
Traditional rectangular building has two front panels in the form of protruding cylindrical segments. At the top of the access to the optical drive and an external connection for the HDD and SSD. The perforated slotted holes of various sizes in the form of the stylized logo BOXX. Inner panel fixed.
The outer panel is the whole area of the outer surface of the slotted holes that create a light airy openwork pattern. The logo is at the top of the BOXX. On the top face are the power button, lifting the lid top dock station and lower the blinds. The blind is lowered when you need access to an optical drive and docking stations.
The right pane has a vertical array of holes, located at the front of the chassis for the incoming air in the area where water cooling radiators. The remaining surface has a transparent opening in the form of the stylized logo BOXX. Through the opening you can see the internal equipment.
Rear panel, top and bottom panels also have openwork holes perforating the same form. Openings on the top and bottom panels are the filters that are cleaned up without opening the chassis.
The top panel in the front of the body is covered with a lid, dock station. The upper part displays USB 3.0, USB 2.0 card reader connector for iPhone, Android and other smartphones, microphone and headphones socket, Reset button. In the dock is mounted 7 "display. Information is displayed on the status of the devices (CPU temperature, HDD coolers, turnovers) and the ability to manage these settings.
Number of slots-12 USB (shareware showing on the top of the back panel, 4-8).
The design features.
Body material: aluminum. The obverse surface polished, Matt, has a coating of different colors or white. As an exclusive option to apply high-quality texture depicting natural skin mammals, reptiles or wild animal furs.
Various combinations of texture images in one case.
Thanks
My sincere thanks to the community and all its members for the opportunity to use their experience as a source of inspiration in creating this project. My thanks also to the customer in this job for the opportunity to participate in the work and the pleasure I received.
If the members of the community have expressed their opinion about my work, I will also be grateful for feedback and criticism.
В этом проекте поставленная задача реализована следующим образом:
Классическая форма корпуса рабочей станции сохранена практически без изменений. Дизайнерский замысел направлен на придание привычному виду легкости и необычной фактуры поверхности. При этом полностью обеспечено охлаждение нагревающихся поверхностей (эффективная аэродинамика внутри корпуса, технологические отверстия для входа и выхода воздуха, очистка воздуха от пыли).
Конструктивные особенности.
Традиционный прямоугольный корпус имеет две лицевые панели в виде выступающих цилиндрических сегментов. В верхней части панели организован доступ к оптическому приводу и док станции для внешнего подсоединения HDD и SSD. Панель перфорирована щелевыми отверстиями различного размера в форме стилизованного логотипа BOXX. Внутренняя панель неподвижная.
Внешняя панель имеет по всей площади наружной поверхности щелевые отверстия, создающие легкий воздушный ажурный рисунок. В верней части расположен логотип BOXX. На верхней грани располагаются кнопки включения, подъема крышки верхней док станции и опускания шторки. Шторка опускается при необходимости доступа к оптическому приводу и док станции.
Правая панель имеет вертикальный массив отверстий, расположенный в передней части корпуса для пропуска входящего воздуха в зону расположения радиаторов системы водяного охлаждения. Оставшаяся поверхность имеет прозрачный проем в форме стилизованного логотипа BOXX. Сквозь проем видно внутреннее оборудование.
Задняя панель, верхняя и нижняя панели также имеют ажурную перфорацию из отверстий той же формы. Проемы на верхней и нижней панелях защищены фильтрами, которые очищаются без открывания корпуса.
На верхней панели в передней части корпуса расположена прикрытая крышкой док станция. На верхнюю часть выведены гнезда USB 3.0, USB 2.0, card reader, коннектор для iPhon, Android, и прочих смартфонов, гнезда микрофона и наушников, кнопка Reset. В крышку док станции вмонтирован 7” дисплей. На дисплей выводится информация о состоянии устройств (температура процессора, жестких дисков, обороты кулеров) и возможность управления этими параметрами.
Число гнезд USB всего – 12 (условно показаны на верхней панели 4, на задней панели – 8)
Особенности дизайна.
Материал корпуса – алюминий. Лицевая поверхность полированная, матированная, имеет покрытие различного цвета или без покраски.
В качестве эксклюзивного варианта предлагается нанесение высококачественных текстур изображающих натуральную кожу млекопитающих, рептилий или меха диких животных. Возможны сочетания различных текстурных рисунков в одном корпусе.
Благодарности
Приношу искреннюю благодарность сообществу и всем ее членам за возможность использовать их наработки в качестве источника вдохновения при создании этого проекта. Также приношу благодарность заказчику данного задания за возможность принять участие в конкурсной работе и то удовольствие, которое я получил при этом.
Если члены сообщества выразят свое мнение по поводу моей работы, я также буду им благодарен за отзывы и критику.
Similar models
grabcad
free
Фотобудка + фотопринтер
...бя и выведения на печать с флешки (с предварительным просмотром на мониторе, установленном в верхней панели корпуса фотопринтера)
grabcad
free
Bricks forming design up
...влечение из формы;
добавил 3мм компенсирующую угол кромку в верхней части, чтобы уменьшить нагрузку на острый угол в этом месте.
grabcad
free
Челюстной ковш на мини погрузчик / Jaw bucket for mini loader
...ка.
челюстной ковш является сменным орудием и крепится к трактору системой навески, которая, оснащена быстросъемным соединением.
grabcad
free
Chair Venezia - Стул Венеция
...кет, что исключает его порчу, а также защищает от царапин, сколов, налипания пыли. допустимая нагрузка на стул составляет 120 кг.
grabcad
free
Smokehouse
...ор наливают воду. коптильню устанавливают на жаровню или костер на опоры.
чем больше практики и желания – тем вкуснее результат!
grabcad
free
Smokehouse bunk
...ешетке, так и подвешивать на крючках.
назначение – приготовление копченостей из свежего мяса, рыбы, грибов, овощей, сыра и проч.
grabcad
free
Krimelte foamheater
... площадках не всегда есть возможность подключения к электросети). устройство простое в использовании и безопасно для потребителя.
grabcad
free
Поворотный конвейер
...ет возможность поворачиваться на 210 градусов вокруг загрузочного устройства. электрический и гидравлический приводы не показаны.
grabcad
free
Оборудование телескопического погрузчика,Манипулятор Шины
...одели шинного манипулятора, предназначен для установки на различные погрузчики. имеет возможность движения колеса во все стороны.
grabcad
free
Соединители СНЦ23 и СНЦ23Л
... отсутствует)
в - всеклиматическое исполнение (если покрытие контактов - серебро, то после буквы в ставиться 1, т.е. в1).
4150
grabcad
free
4150 to 4500
...4150 to 4500
grabcad
an adapter made to mount a 4150 carb on a 4500 intake
grabcad
free
BOXX 4150 VORTEXX
...utting-edge cad technology of boxx thorugh a new, revigorated look that represents the precision and elegance os its performance.
grabcad
free
Lego Part - 4150
...lego part - 4150
grabcad
lego flat 2x2 circular plate
grabcad
free
3DBOXX 4150 XTREME
...ompatible with the components required.
-represents the brand in a very attractive way.
-is creative and has harmonic appearance.
grabcad
free
3DBOXX 4150 XTREME workstation
...3dboxx 4150 xtreme workstation
grabcad
that`s it! enjoy my boxx!
grabcad
free
3DBOXX 4150 Xplicitus
... illuminated xx logo, and wires of the usb ports are embedded in see through plastic for a unique feel. front vents are xx shape.
grabcad
free
3D Boxx 4150 Extreme
... (for easy maintenance)
please also check my 1st entry
https://grabcad.com/library/3dboxx-4150-xtreme-1
thank you for viewing.
grabcad
free
3DBOXX 4150 XTREME
...elease front vent. (for cleaning)
thank you for viewing my case.
ps. graphics card and flash drive are from other user. thanks!
grabcad
free
1" nitro bracket for 4150 - front or rear
...t for 4150 - front or rear
grabcad
nitro bracket for square bore quadrijet with 1" solenoid. front or rear mounting setup.
grabcad
free
BOXX XCAD 4150 Workstaion
... storage. although most people don't transport their pc's, the xcad is designed with everyone, including gamers, in mind.
Xtreme
grabcad
free
astha-xtreme
...astha-xtreme
grabcad
astha-xtreme
grabcad
free
ASTHA-XTREME
...astha-xtreme
grabcad
astha-xtreme
grabcad
free
Xtreme Solid V Wheel
...xtreme solid v wheel
grabcad
xtreme solid v wheel
grabcad
free
New Xtreme
...new xtreme
grabcad
my project since 2010 for inax vietnam sanitaryware
grabcad
free
ARC Xtreme
...arc xtreme
grabcad
did not get to finish previous upload,lost connection.
grabcad
free
QubeQube Boxx Xtreme
...qubeqube boxx xtreme
grabcad
a qube-style workstation
grabcad
free
MGL Xtreme EFIS
...abled connectors for your aircraft panel design. based on the dimensional drawings and pictures. useless details largely ignored.
grabcad
free
Sports Xtreme Wheels TSW 17 "
...sports xtreme wheels tsw 17 "
grabcad
sports xtreme wheels tsw 17 "
grabcad
free
3DBOXX 4150 XTREME
...ompatible with the components required.
-represents the brand in a very attractive way.
-is creative and has harmonic appearance.
grabcad
free
3DBOXX 4150 XTREME workstation
...3dboxx 4150 xtreme workstation
grabcad
that`s it! enjoy my boxx!
Boxx
grabcad
free
BOXX
...boxx
grabcad
boxx
grabcad
free
BOXX
...boxx
grabcad
boxx challange
grabcad
free
BOXX | EDGE
...boxx | edge
grabcad
this boxx design employs a layered effect, while still preserving elements of the current boxx design.
grabcad
free
Boxx
...boxx
grabcad
first draft...
grabcad
free
BOXX workstation
...boxx workstation
grabcad
some solutions for boxx xtreme workstation
grabcad
free
The BOXX
... matching shape "box". clean and easy to manufacture with colour option. logo could be add on the side or at the front.
grabcad
free
Boxx Spring
...boxx spring
grabcad
boxx workstation .lines of petals, with spring flower
grabcad
free
BOXX
...boxx
grabcad
trying to improve my skills
grabcad
free
BOXX Cubed
...to the 21st century with both speed and style with the boxx cubed.
for cad designers by cad designers.
think inside the boxx.
grabcad
free
Boxx oak
...boxx oak
grabcad
boxx computers- curves and angles, the effect of oak with the glow of the plate
Workstation
grabcad
free
workstation
...workstation
grabcad
workstation
grabcad
free
Workstation
...workstation
grabcad
workstation
grabcad
free
workstation
...workstation
grabcad
workstation
grabcad
free
workstation
...workstation
grabcad
workstation
grabcad
free
WORKSTATION
...workstation
grabcad
workstation
grabcad
free
Workstation
...workstation
grabcad
workstation
grabcad
free
workstation
...workstation
grabcad
office workstation
grabcad
free
workstation
...workstation
grabcad
pc workstation
grabcad
free
Workstation
...workstation
grabcad
workstation for garments worker
grabcad
free
workstation
...workstation
grabcad
common office workstation