Thingiverse
Airtight Filament Storage/ Dispenser II by Simonwlchan
by Thingiverse
Last crawled date: 3 years, 1 month ago
New filament spools from a different supplier were wider and could not fit in my original/ old design (http://www.thingiverse.com/thing:773044) so I made version 2, here, that would fit multiple reels in a single box.
Added a simplified filament dispenser opening that prints a lot faster. But requires a pair of M3*8mm screws to secure, and a short PTFE tube to provide a smooth flow.
The spools are held by a 1.5 inch PVC tuning, mounted on both sides of the box with M3*8mm screws. Spool separators prevent/ minimise spool contact (inspired by a design I saw on Thinginverse, but cannot recall where).
Suggestion: Mount spools in opposite directions, mount PTFE holders in alternate top/down configuration to prevent spool entanglement. Works for me.
Hygrometer mount can be found at my original design (http://www.thingiverse.com/thing:773044)
Added a simplified filament dispenser opening that prints a lot faster. But requires a pair of M3*8mm screws to secure, and a short PTFE tube to provide a smooth flow.
The spools are held by a 1.5 inch PVC tuning, mounted on both sides of the box with M3*8mm screws. Spool separators prevent/ minimise spool contact (inspired by a design I saw on Thinginverse, but cannot recall where).
Suggestion: Mount spools in opposite directions, mount PTFE holders in alternate top/down configuration to prevent spool entanglement. Works for me.
Hygrometer mount can be found at my original design (http://www.thingiverse.com/thing:773044)
Similar models
thingiverse
free
PTFE Adapter for SPANNERHANDS Spool System by stonecoldfx
...egendary spannerhands filament wall mounted case!! (best thing out there in my opinion)
https://www.thingiverse.com/thing:2119644
thingiverse
free
Sensor Adapter
... visibel on the pictures.https://www.thingiverse.com/thing:4119211
and my filament box: https://www.thingiverse.com/thing:4119344
thingiverse
free
Spool box pipe mount (40mm) by Skaparen
...bolts
as filament guid for my box,i use this screws (https://www.thingiverse.com/thing:2139021) , because it is only printet mat.
thingiverse
free
Quick Change Spindle for 1lb Filament Spool w/8mm Bushing by QuantumConcepts
...on http://www.thingiverse.com/thing:20663 originally but now using the derivative instead: http://www.thingiverse.com/thing:21502
thingiverse
free
Creality CR10 wheel filament guide: Z mounting
...ng:3886519
there is another version when used with multiple spool above the command box:https://www.thingiverse.com/thing:2924657
thingiverse
free
Camera Mount for Makerfocus Raspberry Pi Infrared IR camera by ralane
...s base: https://www.thingiverse.com/thing:3294512
requires 4 m3 screws. i used 8mm, but larger or smaller screws should work too.
thingiverse
free
Filament spool holder on top of delta printer by philteng
...r that used 240mm 2020 horizontal frame.
m3 8mm screw x4
m3 nut x4
t-nut for 2020 x4 (https://www.thingiverse.com/thing:1609323)
thingiverse
free
PP3DP Up Plus spool holder by PrintMo
...an mount it with the delivered m3 hexagon socket screws.
works perfectly together with: http://www.thingiverse.com/thing:253718
thingiverse
free
Prusa i3 Aluminum frame - Filament Spool mount by shrike88
...ough for anyone wanting larger than 1kg spools or multiple spools i'd suggest at minimum 30% fill (for structural integrity).
thingiverse
free
Filament Feeder for MPMD Top Spool by PorchPhysics
... are on top of the towers already, and it leaves a hole for adjusting belt tension without removing this part. hope you like it!
Simonwlchan
thingiverse
free
Pump stopper by Simonwlchan
... clip to prevent accidental discharge of a press-pump. sketchup source file included, mod it and save yourself from a mess today.
thingiverse
free
Remix Simonwlchan PTFE Mount by Nobel0
...ve ptfe tube and just want to pass the filament through. the filament hole is 2mm.
i uploaded the fusion 360 file.
happy printing
thingiverse
free
Belt Loop by Simonwlchan
...o versions for 10mm and 15mm spacing. all external edges rounded. prints without support or rafts, ready to go off the print bed.
thingiverse
free
Table Edge Clip by Simonwlchan
...le edge clip by simonwlchan
thingiverse
table edge-mounted clip (with small bits double sided tape) to hold a pair of gloves etc
thingiverse
free
Printrbot Cable Clips by Simonwlchan
...iverse
keep your power, usb and other cables close to the printrbot chassis. works on all sides of the metal 1403's chassis.
thingiverse
free
LCD Panel Corner Protector by Simonwlchan
... protector by simonwlchan
thingiverse
simple snap-on corner protector for the kossel lcd panel. standard piece fits all corners.
thingiverse
free
Envelope Bin Holder by Simonwlchan
...rwise discarded) mailing envelopes as desktop/ countertop bins. go green!
see how it works >> http://youtu.be/zqharqw9ep0
thingiverse
free
GrilleDuct for Printrbot by Simonwlchan
...ps against ambient temperature of 31c.
the grille is to stop my fingers getting ground every time i reach behind the printer :)
thingiverse
free
Fender Pickup Cover by Simonwlchan
...nd a gaping hole).
print this flat, and cut off the 8 corner struts, which are meant to keep the piece from warping during print.
thingiverse
free
Lenovo x240 Camera Shroud by Simonwlchan
...0 laptop that prints, mounts and works in one piece. picture shows v1 that was a tad tight, v2 (stl attached) has corrected that.
Airtight
turbosquid
$5
Glass jar Airtight
...lass jar airtight for download as blend, fbx, stl, dae, and x on turbosquid: 3d models for games, architecture, videos. (1697416)
thingiverse
free
Airtight container handle
...airtight container handle
thingiverse
it's a handle for the airtight container without handle.
thingiverse
free
Airtight Seal by Markusking
...ake a airtight seal for plastic bottle and garden hose. i will test it :)
edit it online https://tinkercad.com/things/ee18zezkjqp
thingiverse
free
Airtight Container handle/clip
...reusable airtight container. sold on amazon or other places under names like "airtight container set for food storage"
thingiverse
free
Airtight seal by Markusking
...t seal by markusking
thingiverse
i used this to make a bottle watertight to make this http://www.youtube.com/watch?v=0zmd2wtgo2k
thingiverse
free
Airtight filament feeder by Nurgo
...mm), for very accurate printers.
medium clearance (0.2mm), for most printers.
lose clearance (0.3mm), for less accurate printers.
thingiverse
free
Airtight Filament delivery system (almost) by stephenmhall
...ystem (almost) by stephenmhall
thingiverse
airtight food container filament holder, using push fit connectors to top of printer.
thingiverse
free
Filament Dispenser Stand for Snapware Airtight Container by Alllex
...from. works with an airtight box and basic tubes way better than 60$ commercial unit that i first bought for an airtight storage.
thingiverse
free
Airtight spool box by danlotano
...0x250x100mm box. silica gel on the bottom will keep everything dry. ptfe tube to guide filament out of the box into the extruder.
thingiverse
free
airtight box by VirgilLaVerge
...airtight box by virgillaverge
thingiverse
boite 100% hermétique à l'eau,
longueur : 6 cm
largeur : 2,5 cm
hauteur : 7 cm
Dispenser
archibase_planet
free
Dispenser
...dispenser
archibase planet
soap dispenser sanitary ware
soap dispenser - 3d model for interior 3d visualization.
archibase_planet
free
Dispenser
...dispenser
archibase planet
toilet paper dispenser sanitary ware
toilet paper dispenser - 3d model for interior 3d visualization.
archibase_planet
free
Dispenser
...hibase planet
dispenser water cooler cooler water
dispenser n040815 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
3d_export
$10
soap dispenser
...soap dispenser
3dexport
soap liquid dispenser for top.
3ddd
$1
soda dispenser
...soda dispenser
3ddd
бар , кафе
soda dispenser
turbosquid
$5
dispenser
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$12
Water Dispenser
...dispenser furnishings lowpoly water
this is a water dispenser hot water for tea is winter and summer is cold for souls. have fun!
archive3d
free
Dispenser 3D Model
...aper towel dispenser mediclinics n280116 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archive3d
free
Dispenser 3D Model
...ater t6 purifier water dispenser n260216 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
Soap dispenser
...ser
3dexport
soap dispenser for your bathroom interior design<br>include:<br>- pbr-materials<br>- 2 dispensers
Ii
3d_ocean
$5
inoplanet II
...inoplanet ii
3docean
3ds arman3dg games ii inoplanet low max poly trees
inoplanet ii
3ddd
$1
Novecento II
...novecento ii
3ddd
консоль
консоль: ii novecento
дизайнер: elia monterosso
3ddd
$1
Спальня VENERO II
...d
venero ii , venero , hulsta
спальня venero ii
3ddd
$1
PROPORTION II
...proportion ii
3ddd
malabar emotional
консоль proportion ii
malabar emotional design
коллекция euphoria
3ddd
$1
Regina II
...ltrona frau , капитоне
this is a custom version of the poltrona frau regina ii armchair.
3d_export
$119
cinderella ii
...cinderella ii
3dexport
3d_export
$119
lara ii
...lara ii
3dexport
3d_export
$119
doris ii
...doris ii
3dexport
3ddd
$1
Heracleum II
...s endless technical possibilities,
making this new version much more efficient while providing unique and sparkling illumination.
3ddd
$1
Towel Collection II
...towel collection ii
3ddd
полотенце
towel collection ii
Storage
archibase_planet
free
Storage
...storage
archibase planet
shelf locker shelving
overhead storage unit - 3d model for interior 3d visualization.
turbosquid
$3
storage
...id
royalty free 3d model storage for download as stl and ipt on turbosquid: 3d models for games, architecture, videos. (1249483)
3d_export
$5
Oil storage
...oil storage
3dexport
big oil storage or barrel or storage tank 2 formats lwo & obj
turbosquid
$15
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
storage
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Storage Baskets
...storage baskets
3ddd
restoration hardware , корзина
restoration hardware storage baskets
3d_export
$5
water tank of storage-tank oiltanker storage
...ater tank of storage-tank | oiltanker storage can be used in ed model environment. this low poly water tank can be used for free.
archive3d
free
Storage 3D Model
...3d model
archive3d
storage shelving furniture
storage - 3d model for interior 3d visualization.
3d_export
$8
chain storage wheel
...chain storage wheel
3dexport
chain storage wheel
Filament
3ddd
$1
Filament Cage
...filament cage
3ddd
лофт , filament cage
модель бра, делалась по фото!
turbosquid
$3
FILAMENT COUNTER
...d
royalty free 3d model filament counter for download as stl on turbosquid: 3d models for games, architecture, videos. (1563049)
3d_export
$5
Filament lamp 3D Model
...filament lamp 3d model
3dexport
filament lamp 3d model kevin 54161 3dexport
3d_export
$5
Filament bulb candle 3D Model
...filament bulb candle 3d model
3dexport
filament bulb-candle
filament bulb candle 3d model kevin 54163 3dexport
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3d_export
$5
Filament led light bulb
...filament led light bulb
3dexport
realistic 3d model of filament light bulb with v-ray materials.
3ddd
$1
Factory filament metal shade
...factory filament metal shade
3ddd
restoration hardware
restoration hardware. 20th c. factory filament metal shade.