AIRES ULTRA V5

Last crawled date: 1 year, 11 months ago

The most advanced micro DLG there is. Period!
Building this requires professional molded wings tail and pod. Wing foam core must be CNC milled. Wing molds must be CNC milled. Please feel free to produce and sell these for as much as you like. All intellectual information is free. Feel free to make small changes to your desire, however the wings and tails are key and should not be altered. The pod can be altered. These new airfoils promise to improve thermaling. The electronics and servo's I'm using here are pretty much your only choice as of 2018.. Any attempts to use anything else will probably end in frustration. The electronics were very carefully picked. All files were done in Rhino 4.0 Wings and tails should be made with CW20 Carbonweave with pink foam cores. The tailboom used for this design can be found here: Item #: T509Lm 5.0 mm OD, 4.0 mm ID, 1m length, 11.1 grams http://www.cstsales.com/Carbon_Fiber_Tubes.html


Lemon Rx DSM2 Compatible 6-Channel Receiver (Micro Light)
https://www.lemon-rx.com/index.php?route=product/product&path=59&product_id=104

Servo's
HobbyKing™ HK-5330S Ultra-Micro Digital Servo 0.17kg / 0.04sec / 1.9g
https://hobbyking.com/en_us/ultra-micro-digital-servo-1-9g-0-05sec-0-12kg.html?___store=en_us

E-flite 3.5-Gram DS35 Digital Super Sub-Micro Servo for wings may be used..