AI The Somnium Files Aiba Human Form Figure | 3D

Last crawled date: 1 year, 6 months ago

Figure of Aiba from AITSF. Comes with a head and body file. It is recommended to print the head and the body upside down. Personal Recommended Cura Settings: Walls: Wall Thickness: 1.6mm Infill: Infill Density: 5-10% (make the body a higher infill percentage than the head and make sure to increase the density of smaller forms so that they don't break) Infill Pattern: Lines Support: Support Placement: Everywhere Support Overhang Angle: 60-65 degrees Support Density: 15-20% Enable Support Interface Enable Support Roof Enable Support Floor Use Towers Build Plate Adhesion: Raft Size: Print Head & Body at 72.51% for a ~5in figure Angle: It is recommended to print these files at an angle where minimum support is required, while being enough to prevent the print from failing. I tend to print the heads at a 30-45 degree angle and the bodies at a 180 degree angle (so that the feet are in the air). Copyright: This is PERSONAL USE only. You cannot sell the file or print and sell the figures. aitsf aini chibi figure figurine video game spike chunsoft anime art aiba sculptures