AF-Model Sky Surfer Wheel Glider Landing Gear by Hypersapiens 3d
Warning. This content is not moderated and could be offensive.
m4
3dmdb logo
Thingiverse
AF-Model Sky Surfer Wheel Glider Landing Gear by Hypersapiens

AF-Model Sky Surfer Wheel Glider Landing Gear by Hypersapiens

by Thingiverse
Last crawled date: 3 years, 3 months ago
Landing gear for the AF-Model Sky-Surfer or any other EPO-glider.
Diameter: 70mm
Weight: 22g
Needed: 1x M3x20 Bolt, 1x M3 Nut
Printing:
Print the housing and the template with 100% infill. And the Wheel (laying down on the side) with a top and bottom thickness of 0,8mm and a wall thickness of 1,2mm.
Supports are only needed for the wheel.
Use the template like seen on the pictures to cut the hole for the wheel.
Attach the wheel to the housing via the M3 bolt and nut.
Push it in from the outside. When needed fixate it with a little bit of glue.

Tags