Adjustable hue play mount for dell monitor by FlyingFeynman

Last crawled date: 2 years, 10 months ago

A colleague wanted to mount his Hue Play on a DELL monitor stand (here its a P2419H, should work on others as well). Features of this design are:
without any double-sided tape
possibility to align the light to preferred position
clean table without the original hue stand on it
Used and modified the following things for this design:
Dell Docking station mount by Legufix Fhttps://www.thingiverse.com/thing:3454163
Open Source Universal Ball Joint (to reuse!) by DieZopfehttps://www.thingiverse.com/thing:4739696
Additional to the M3 Screw which comes with the hue play you will need two M2, 12mm long screws, nuts and washer to assemble the set up.
Not necessary but maybe easier to assemble: A few drops of superglue to fix nuts and washer in their position.
Printer settings with PLA on an Anycubic i3 mega:
dell-mount-smaller:
Support: Yes (Tree)
Density 15%
Brim
Resolution 0,2mm
Small parts (modified_ball_v3, screw_v3, hue-play-mount):
Support: No
Density 40%
Skirt
Resolution 0,1mm