3DWarehouse
Adafruit BNO055
by 3DWarehouse
Last crawled date: 1 year, 11 months ago
If you've ever ordered and wire up a 9-DOF sensor, chances are you've also realized the challenge of turning the sensor data from an accelerometer, gyroscope and magnetometer into actual '3D space orientation'! Orientation is a hard problem to solve. The sensor fusion algorithms (the secret sauce that blends accelerometer, magnetometer and gyroscope data into stable three-axis orientation output) can be mind-numbingly difficult to get right and implement on low cost real time systems. Bosch is the first company to get this right by taking a MEMS accelerometer, magnetometer and gyroscope and putting them on a single die with a high speed ARM Cortex-M0 based processor to digest all the sensor data, abstract the sensor fusion and real time requirements away, and spit out data you can use in quaternions, Euler angles or vectors. Rather than spending weeks or months fiddling with algorithms of va https://learn.adafruit.com/adafruit-bno055-absolute-orientation-sensor?view=all#overview
Similar models
grabcad
free
Adafruit BNO055
...adafruit bno055
grabcad
adafruit bno055 absolute orientation sensor
grabcad
free
GY-801
...gy-801
grabcad
sensor module that integrates gyroscope, accelerometer, magnetometer and barometer.
grabcad
free
Adafruit BNO055 9-DOF IMU STEMMA QT
...s://learn.adafruit.com/adafruit-bno055-absolute-orientation-sensor/downloads
product page:
https://www.adafruit.com/product/4646
thingiverse
free
IMU Holder BNO055 for FTC Robotics by thomasmgill
...er as shown in the photo. it's probably best to use brass so the magnetic sensor doesn't have iron nearby to confuse it.
thingiverse
free
Ambasat2 Space flight simulator by pe1mew
...nted @ambasat2 sprite satellite space-flight-simulator for software testing of the gyroscope, accelerometer, magnetometer sensor.
thingiverse
free
Support to calibrate accelerometer/gyroscope MPU6050 (GY-521) by Minguz
...yin to have the center of the sensor in the center of the support. at this point you can tilt it at 45/90 degree in the two axis.
thingiverse
free
Adafruit BNO055 Housing by ftc9881
...adafruit bno055 housing by ftc9881
thingiverse
this is a simple housing for the adafruit bno055 imu.
3dwarehouse
free
KickSat Sprite - basic model
...at sprite - basic model
3dwarehouse
this is a basic sprite for the purpose of animating the magnetometer and accelerometer data.
grabcad
free
BNO055-0273141209
...bno055-0273141209
grabcad
intelligent 9 - axis absolute orientation sensor
thingiverse
free
Adafruit Stemma QT sensor case by Lubarb
... the side and the boards snap into place. the cover press/friction fits.
i printed it in petg, but that shouldn't be critical
Bno055
thingiverse
free
Adafruit BNO055 Housing by ftc9881
...adafruit bno055 housing by ftc9881
thingiverse
this is a simple housing for the adafruit bno055 imu.
thingiverse
free
Adafruit IMU Holder (BNO055) by anacortesftcrobotics
...55) by anacortesftcrobotics
thingiverse
this is a holder for a bno055 imu from adafruit, designed to connect with tetrix pieces.
thingiverse
free
IMU Holder BNO055 for FTC Robotics by thomasmgill
...er as shown in the photo. it's probably best to use brass so the magnetic sensor doesn't have iron nearby to confuse it.
thingiverse
free
FTC Modern Robotics CDIM Mount with BNO055 mount by Corban987
...nnect to the cdim. mount using cdim holes and adds very little extra space as it uses the corner where the usb cable cannot flex
thingiverse
free
Adafruit IMU BNO055 Housing by SwerveRobots
...again, the holes might be too small, so you can frill them out with a #27 drill bit to create a through hole (or create threads).
thingiverse
free
InMoov Self Levelling Hand by juergm
...(http://inmoov.fr/). with the help of an orientation sensor (adafruit bno055, an android nano, an additional servo and some modifications...
thingiverse
free
Calibration Bed by Graystone
...adafruit 10dof breakout board the other fits the adafruit bno055 breakout board...
thingiverse
free
iB1 - iBalance One - Balancing Bot by markab
...arduino leonardo with a custom shield interfacing with a bno055 fusion imu. a raspberry pi 3 provides opencv image...
grabcad
free
BNO055
...bno055
grabcad
bno055
grabcad
free
BNO055
...bno055
grabcad
bno055
data sheet - https://cdn-shop.adafruit.com/datasheets/bst_bno055_ds000_12.pdf
Adafruit
turbosquid
$1
LIS3DH and Adafruit Feather M0 Bluefruit LE and Adalogger FeatherWing - RTC + SD
...ruit le and adalogger featherwing - rtc + sd for download as on turbosquid: 3d models for games, architecture, videos. (1403993)
thingiverse
free
Adafruit Resistor Helper by adafruit
... matthew borgatti: http://har.ms/
creative commons attribution, share-alike
all text above must be included in any redistribution
thingiverse
free
Adafruit Tree Topper by adafruit
...s a neopixel strip and is powered by gemma.
follow the complete guide on:http://learn.adafruit.com/gemma-3d-printed-tree-topper
thingiverse
free
Adafruit Proto Plate for Beagle Bone by adafruit
... burgess for adafruit industries.
creative commons attribution, share-alike all text above must be included in any redistribution
thingiverse
free
IoT Gmailbox by adafruit
...uit.com/product/2821
submicro servohttps://www.adafruit.com/product/2201
visit the adafruit shop online - http://www.adafruit.com
thingiverse
free
Adafruit Fona CAD Model by adafruit
...sed from solid works library. created using eagleup for google sketch up. dxf file included for converting into other 3d formats.
thingiverse
free
Adafruit Bone Box - Enclosure for Beagle Bone by adafruit
... burgess for adafruit industries.
creative commons attribution, share-alike all text above must be included in any redistribution
thingiverse
free
Adafruit ESP8266 Feather by tankapotamus
...adafruit esp8266 feather by tankapotamus
thingiverse
adafruit esp8266 feather.
thingiverse
free
Adafruit BNO055 Housing by ftc9881
...adafruit bno055 housing by ftc9881
thingiverse
this is a simple housing for the adafruit bno055 imu.
thingiverse
free
IoT Printer Enclosure by adafruit
...dafruit industries.
creative commons, attribution & share-alike license
all text above must be included in any redistribution