Thingiverse
ad X by alpinedrones
by Thingiverse
Last crawled date: 3 years, 1 month ago
Introducing the new alpinedrones X quadcopter. It's supposed to be a relatively light weight perfect X frame for 4" props and 1306 or 1804/1806 motors.
The built should be self-explanatory and done in a few hours. All components can be swapped to a new frame within minutes.
The FPV mount doubles as Mobuis/Runcam/808 mount.
my setup:
PDB with integrated 12V and 5V regulators
Naze32 running CF
D4Rii
sn20a ESCs running blheli
RCX1306 3100kv motors
eachine fpv combo (super cheap, but ok)
weight without battery: 198g
AUW with 1300mah 3S battery and 808 cam: 342g
UPDATE: 10.12.15: body_v2.stl minor modifications
UPDATE: 4.1.16: fpv_v4 and v5. identical mounts, just different ways to mount the cam. I recommend a vtx with an antenna cable. (edit 19.4.16: files deleted)
UPDATE: 22.2.16: 192 - 5" version. flight tested 5" prototype
(supposedly) FINAL UPDATE 19.4.: the last 4" and the 5" design seem to work really well, so there's not much left to change. two new files: a new fpv mount for board cameras and a new top plate. these two attach to each other with two rapstraps. should work much better than zipties.
The built should be self-explanatory and done in a few hours. All components can be swapped to a new frame within minutes.
The FPV mount doubles as Mobuis/Runcam/808 mount.
my setup:
PDB with integrated 12V and 5V regulators
Naze32 running CF
D4Rii
sn20a ESCs running blheli
RCX1306 3100kv motors
eachine fpv combo (super cheap, but ok)
weight without battery: 198g
AUW with 1300mah 3S battery and 808 cam: 342g
UPDATE: 10.12.15: body_v2.stl minor modifications
UPDATE: 4.1.16: fpv_v4 and v5. identical mounts, just different ways to mount the cam. I recommend a vtx with an antenna cable. (edit 19.4.16: files deleted)
UPDATE: 22.2.16: 192 - 5" version. flight tested 5" prototype
(supposedly) FINAL UPDATE 19.4.: the last 4" and the 5" design seem to work really well, so there's not much left to change. two new files: a new fpv mount for board cameras and a new top plate. these two attach to each other with two rapstraps. should work much better than zipties.
Similar models
thingiverse
free
UBQ 180 200 unibody quadcopter by alpinedrones
... upcoming final frame files will have slots to mount the battery on the bottom of the frame.
update 7: a tiny runcam/mobius riser
thingiverse
free
808 key cam holder for Bixler 3 FPV mount by mario925
... or tape it.
file '808 key cam holder for bixler 3 fpv mount diag cut off.stl' is for a mount position at the very front.
thingiverse
free
fpv mafia x-murder custom action cam mount (m20) by Cmcclain
...0) by cmcclain
thingiverse
this is a action cam mount i designed for my sjcam m20 to go on my fpv mafia x-murderer 5" frame
thingiverse
free
Rotorx Raiju Cam Mount 30° deg by t4b_
...frame.
it's designed for the foxeer xat520 but should also work for the slightly smaller mini cmos fpv 520tvl from hobbyking.
thingiverse
free
TBS G2 FPV Cam Receiver Antenna Mount by grammo
...nd a fpv cam (run cam split in this case)
sketchup file include
i've updated to a center mount fpv cam. see my remix for that
thingiverse
free
Rush 3"/4"/5" GoPro Mount + FPV Camera Cage by wemps
...bottom plate to give the whole mount clearance over the rear screw and the fpv antenna mount. it's optional but recommended.
thingiverse
free
Run Cam Mount for FPV by rosiris3
...run cam mount for fpv by rosiris3
thingiverse
run cam mount for fpv quad
thingiverse
free
Spazz Fpv 5" by Dcdesigns
...in the early stages and in testing****
print
2x rear pylon
4x 5in arms (set to 5mm thick for printed arms)
1x of all other parts.
thingiverse
free
Ritewing MiniZ24 FPV Cam Mount by IcarusFPV
...ritewing miniz24 fpv cam mount by icarusfpv
thingiverse
a remix of the hardcore fpv cam mount for the new miniz24" model.
thingiverse
free
Xhover Win 5/4/3 Run Cam Micro mount by Xhover
.../3 run cam micro mount by xhover
thingiverse
run cam micro camera mount for the xhover win 5/4/3 will also work on the r5x/r5lx
Alpinedrones
thingiverse
free
ubq130 by alpinedrones
...or the receiver tray:http://www.thingiverse.com/thing:1139099 and some of the ubq180 200 remixes - for example for a hs1177 mount
thingiverse
free
SQ8 to GoPro adapter by alpinedrones
...ap sq8 camera to use it with gopro case mounts.
attention: you have to use a soft material like softpla, ninjaflex, tpu, tpe, ...
thingiverse
free
alpinedrones SQ8 to GoPro adapter remix by lagunacomputer
...rotrusion and usb plug access.
added small tab for top edge.
slimmed down the mounting tabs width
thanks alpinedrones!
sq8 camera
thingiverse
free
D4R-II buzzer mount by alpinedrones
...name suggests, a nice way to place your beeper on a miniquad.
30.5x30.5 mounting holes
fits d4r, x4r and several other receivers
thingiverse
free
Trasher2 by alpinedrones
...time, however first test flights and experiences made with the original trasher show that it's a really nice and tough frame!
thingiverse
free
miniquad beeper holder (30.5mm hole pattern) by alpinedrones
...mm hole pattern) by alpinedrones
thingiverse
a simple and clean way to attach the beeper securely to the flight controller stack
thingiverse
free
9xr stronger gimbal spring tensioner by alpinedrones
...ent part puts the hook for the spring 2mm further outside. this results in nicer stick feeling imho.
part works for both springs.
thingiverse
free
eken H9 cage by alpinedrones
...erial like soft pla, ninjaflex or tpu. print front facing down.
in my case the cage weighs 25g, so exactly 50% of the stock case.
thingiverse
free
demonrc NOX5 35&40deg session mount by alpinedrones
...ones
thingiverse
made these very basic session mounts for a friend
other angles might be coming, but i can't promise that...
thingiverse
free
X4 Racer micro quadcopter by alpinedrones
...l. it's called racer because it seems to be more stable at higher speeds in forward flight.
i recommend printing it in abs.
Ad
3ddd
$1
Ad-Hoc
...ad-hoc
3ddd
ad-hoc , viccarbe
ad-hoc
design jean-marie massaud 2007
viccarbe
design_connected
$16
Ad Hoc
...ad hoc
designconnected
viccarbe habitat ad hoc lounge chairs computer generated 3d model. designed by jean-marie massaud.
turbosquid
$160
AD-3D_Pradelles_Door_France
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
AD Desk
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
AD Wardrop
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$5
orange for ads
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$4
Ad A Board
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Petracers Ad Maiora
...petracers ad maiora
3ddd
petracers ad maiora , плитка
50x100
cg_studio
$50
Ad truck3d model
...omo van billboard board
.3ds .c4d .dxf .obj - ad truck 3d model, royalty free license available, instant download after purchase.
turbosquid
$150
Pilar ad Forniture
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.