Thingiverse
A600 VGA Mount by h3nkGer
by Thingiverse
Last crawled date: 3 years ago
The TV modulator has to be removed and the VGA Mount with the VGA plug can be placed and screwed in there.
An M4 screw with an external thread of 3,14 mm and a length between 3 and 6 mm and a piece of shrink tubing are required.
Thus the VGA mount sits bomb-proof - without damaging board or case!
---DE---
Zur Installation muss der TV Modulator ausgebaut und VGA Mount mit dem VGA Stecker einschrauben werden.
Es werden hierfür eine M4 Schraube mit ca 3,14 mm Außengewinde und eine Länge zwischen 3 und 6 mm und ein Stück Schrumpfschlauch benötigt.
Somit sitzt der VGA Mount bombenfest – ohne Board oder Gehäuse zu beschädigen!
An M4 screw with an external thread of 3,14 mm and a length between 3 and 6 mm and a piece of shrink tubing are required.
Thus the VGA mount sits bomb-proof - without damaging board or case!
---DE---
Zur Installation muss der TV Modulator ausgebaut und VGA Mount mit dem VGA Stecker einschrauben werden.
Es werden hierfür eine M4 Schraube mit ca 3,14 mm Außengewinde und eine Länge zwischen 3 und 6 mm und ein Stück Schrumpfschlauch benötigt.
Somit sitzt der VGA Mount bombenfest – ohne Board oder Gehäuse zu beschädigen!
Similar models
thingiverse
free
KL-A Stativ by AerodynicDE
...bauform a (flex).
das stativ kann mit zwei m4 schrauben aufgeschraubt werden. in das innere des sockels passt eine normsteckdose.
thingiverse
free
Filament-Guide, Filamentführung Genius by Hans-G
...de 5 mm). finally, the old holder of the sensor is fixed as filament guide at the top of the holder with the corresponding screw.
thingiverse
free
Tronxy X5S Z Stabilisator by _Reini_
...t eine bessere ausrichtung der z achse und bedarf kaum änderungen. es werden jedoch 4x m4 nutsteine und 4x m4 schrauben benötigt.
thingiverse
free
add-e Speedsenor by Sven382003
... vierkantmutter flach, eine m4 schraube din 912 x 40mm und 2x din 912 m4 x 20 mit 2 federringen und 2 unterlegscheiben benötigt.
thingiverse
free
Filament-Guide, Filamentführung Sidewinder X1 by Hans-G
...de 5 mm). finally, the old holder of the sensor is fixed as filament guide at the top of the holder with the corresponding screw.
thingiverse
free
shower hose clip 18/14mm by TL_all_easy
...m.
du benötigst eine 3 x 30 mm schraube und eine passende stopmutter. an der duschstange anschrauben und den schlauch einclipsen.
thingiverse
free
3+1 schalterblende +1 by PuckiBot
...erse
eine schalterblende für 3+1 schalter bei bedarf kann der mittelsteg entnommen werden und ein 5ter schalter eingebaut werden
thingiverse
free
Single Relais Mount + Din Rail Holder by Mastermod
...lso be screwed.
great for subdivision or mounting under the desk or on the wall.
the parts are screwed with a m4x16 screw and nut
thingiverse
free
Soldering fume fan by Dionarap
...e 92mm fan is simply attached to the frame with the clips.
the following is required:
3x hexagon socket screw m4 x 35mm
3x nut m4
thingiverse
free
Bruder Förderband Bauteile für Elektro Antrieb mit Motor RB350 100 by zorro57
...werden kann.
das original grundgerüst muss an einigen stellenbearbeitet werden. siehe diverse bauberichte im modelltruck forum...
H3Nkger
thingiverse
free
HotwheelTr4ck by h3nkGer
...hotwheeltr4ck by h3nkger
thingiverse
8cm track for hotwheels
thingiverse
free
l3goBrick by h3nkGer
...l3gobrick by h3nkger
thingiverse
special lego compatible brick
thingiverse
free
Ho0k by h3nkGer
...ho0k by h3nkger
thingiverse
hook for a 17mm panel/board
thingiverse
free
BerninaJukiCOneHold3r by h3nkGer
...berninajukiconehold3r by h3nkger
thingiverse
this is a replacement cone-holder for coverlock by bernina and juki.
thingiverse
free
TF328 stand by h3nkGer
...tf328 stand by h3nkger
thingiverse
support stand for terriblefire328
this is a remix
thingiverse
free
ReloadedMK1powerCov3r by h3nkGer
...eloadedmk1powercov3r by h3nkger
thingiverse
new tested version
cover / plate for the icomp c64 reloaded mk1 mainboard power port
thingiverse
free
Gravitr4xPr0 tower by h3nkGer
...gravitr4xpr0 tower by h3nkger
thingiverse
gravitrax pro copatible tower with spaces
thingiverse
free
SSD Stack0r by h3nkGer
...ssd stack0r by h3nkger
thingiverse
thx to colanabo
just smoothed the screw holes and took some material of the base
thingiverse
free
M12 to CS Adaptor by h3nkGer
...m12 to cs adaptor by h3nkger
thingiverse
adaptor for m12 to cs on cameras like smt-uc32
thingiverse
free
Ender5 MicroSwíssDD 40mmFan BLT by h3nkGer
...ender5 microswíssdd 40mmfan blt by h3nkger
thingiverse
ender5 microswíssdd 40mmfan blt
A600
thingiverse
free
a600 extruder upgrade by bakkolo
...a600 extruder upgrade by bakkolo
thingiverse
a600 extruder upgrade
thingiverse
free
Aworldnet A600 - X & Y Belt Tensioners by drbogger
...both x and y axis are available.
if you like what i've done, please consider sending a donation:https://www.paypal.me/cherven
thingiverse
free
xk-a600 brushless motor mount by dmoney4
...thingiverse
mounts the brushless motor to the mount that is glued to the rc plane
had to use a dremel to clear holes for screws.
thingiverse
free
Prusa i3, Aworldnet A600 Z axis plastic printer parts by stefi01
...file are original scans but the two seperate pieces have been strengthened below one to the cross bar parts as seemed to flimsey.
thingiverse
free
Aworldnet A600 Remix spool holder. by transmech
...ing problems. the original wouldn't fit my 8 mm acrylic frame so i had to modify it since it was an outstanding design enjoy.
thingiverse
free
A600 Dual Switch Kickstart by BlackmaxDK
...eld in place nice n tight :)
please feel free to modify the file for your needs, maybe one button, vga, hdmi, watercooling etc ;)
thingiverse
free
Extruder 80mm fan by bakkolo
...80mm fan by bakkolo thingiverse extruder fan made for a600 ...
thingiverse
free
ALPS Eject Button For Amiga 600/1200 by BlackmaxDK
...thingiverse custom designet eject button for the commodore amiga a600 / a1200 that fits alps modded pc drives to...
thingiverse
free
Amiga 600/1200 internal mount by lintilla
...internal stuff like an 4way buffered ide) in amiga a600 / 1200. clips on top of the pcmcia port....
Vga
thingiverse
free
VGA Support by markusreichel
...vga support by markusreichel
thingiverse
vga support
thingiverse
free
VGA spacer by Sziszi
...vga spacer by sziszi
thingiverse
vga spacer for to vga card, if you want to use without pc case, like me.
thingiverse
free
VGA Cap by fraannk
...male) for protection against rain, e.g. i use it on a electric skateboard where the vga connector is used as a balance connector.
thingiverse
free
vga shell by shinzuka
...vga shell by shinzuka
thingiverse
coque pour connecteur vga en version classique ou avec sortie audio.
thingiverse
free
VGA Dummy Case by JAC9369
...vga dummy case by jac9369
thingiverse
vga dummy case for laptop
thingiverse
free
vga protection cover by ihbar
... protection for vga cable. used to protect the small pins from dust or chocks.
protection is blocked by the vga connector screw.
thingiverse
free
Saftycap for VGA Cable by voxy2
...ppe für vga kabel , ideal für die veranstaltungstechnik messebauer usw. passend für die rechteckigen vga stecher und kupplungen .
thingiverse
free
VGA + DVI Cap by leandrebisson
...vga + dvi cap by leandrebisson
thingiverse
cap for a vga port and a dvi port on a graphic card or a motherboard.
thingiverse
free
HDMI to VGA Box
...verse
box printed for an hdmi to vga board. top and bottom, both snug fitting.
friend had the board and no case, so i made one.
thingiverse
free
VGA fan adapter by Bevaz
...ut do not fit mounting seats for regular fans. this adapter will make possible to use vga card fans instead of 4010 and 5010 fans
Mount
thingiverse
free
Pen Mount on BLTouch mount by jetspot
...pen mount on bltouch mount by jetspot
thingiverse
pen mount on bltouch mount
thingiverse
free
RAM Mount, Mount by seanmclean
...ram mount, mount by seanmclean
thingiverse
bridging plate to attach ram mount to yamaha 242, for chartplotter placement.
thingiverse
free
Mount for mount for Garmin GPS by GNOBLIN
...you can use this mount for prevent rotation simple mount around hendelbars.
d handelbar 31.8mm
use m3 screw and din 16903 plug.
thingiverse
free
Permanent mount for Modular Mounting System by WIR14
...permanent mount for modular mounting system by wir14
thingiverse
permanent mount for modular mounting system.
thingiverse
free
Gopro Mount and antenna mount by SuperYoyo
...gopro mount and antenna mount by superyoyo
thingiverse
cut the carbon platform to pass the gopro mount and enjoy !
thingiverse
free
Hexagon Mount for 50mm Mount (Sparkcube) by Draman
...for 50mm mount (sparkcube) by draman
thingiverse
hexagon mount remix from skimmys hotend-mount for sparkcube or other 50mm-mount
thingiverse
free
mount by gixster
...mount by gixster
thingiverse
custom mount
thingiverse
free
Mount by Matrxi999
...mount by matrxi999
thingiverse
shelf mount
thingiverse
free
Motor mount
...motor mount
thingiverse
motor mount
thingiverse
free
GoPro Mount
...gopro mount
thingiverse
gopro mount