Thingiverse
A simple TOP by DR2D
by Thingiverse
Last crawled date: 3 years ago
A quick printing project is making a top, which with a good spin will stand up for about 50 seconds. This one is 32mm in diameter and uses a 3/16” wooden dowel as the spindle. Cut the dowel to 2.5” (62mm) long and sharpen each end in a pencil sharpener or use a knife. Then cut the dowel in half to make two tops.
Print the TOP with 100% fill to get as much weight as possible around the rim (like a flywheel). Slide the dowel into the axis and hold in place with a drop of glue.
Print the TOP with 100% fill to get as much weight as possible around the rim (like a flywheel). Slide the dowel into the axis and hold in place with a drop of glue.
Similar models
thingiverse
free
9mm - 100 Round Flip-Top Box by robertg0123
... 90% of the dowel into the hinge.
brush krazy glue on end of dowel.
finish pushing dowel into hinge using paperclip or thumbtack.
thingiverse
free
Round Dowel by adammmma
...of a wood dowel, scale to the size you need and print! i used it to piece together a model that had been cut into multiple parts.
thingiverse
free
Safety Razor Stand by Tiko23
...m dowels were used to connect the top to the base.
this specific razor is roughly 4.5 inches long so cut your dowels accordingly.
thingiverse
free
Foosball table - laser cut by UOW_Makerspace
...d
ball
score counters
other
elastic bands used as stoppers on the dowel
glue
paint ( optional)
check out some of our other things
thingiverse
free
Bakflip Release Handle by DudeSmiley
... scrap 1.75 filament as dowel rods
dowel rods are 4mm x 7 and 6mm x 3 cuts
use super glue
may not need clamps when glue is drying
thingiverse
free
Toy Grenade Spinning Top by JFlory36
... the dowel and wind string around the dowel. now pull on the key-ring while holding the top portion of the top and watch it spin.
thingiverse
free
Shower Rod Bracket by ohraley
...owel into place on the slot side. make sure to the cut the dowel to fit and stain/seal the dowel to keep it from absorbing water.
thingiverse
free
dowel for drywall by Artformer
...dowel for drywall by artformer
thingiverse
print on cut faces
grabcad
free
Grinder
...e grinder to cut tile, mortar and pavers; make quick work of rust and loose paint removal; sharpen blades and cut or grind steel.
thingiverse
free
Rotary tool accessories by Chooch
...printed it by cutting off the top right before the screw holes then drill the hole straight though to get rid of the counterbore.
Dr2D
thingiverse
free
Prusa Fan Ducts by DR2D
...prusa fan ducts by dr2d
thingiverse
this is the input and output ducts for a prusa extruder fan.
thingiverse
free
Y-Axis Motor Mount by DR2D
...y-axis motor mount by dr2d
thingiverse
this is a y-axis motor mount for a mendlemax printer.
thingiverse
free
Filament Holder for 3D Printer by DR2D
...
i needed a filament holder for my 3d printer. the brackets are printed and then assembled with 1/2" pvc pipe and fittings.
thingiverse
free
Maytag Dishwasher Tine bracket by DR2D
...r basket together. this is the plans for a replacement clamp. the bracket assembles with an 8-32 stainless steel screw and nut.
thingiverse
free
Wind Chime Plug by DR2D
...tic plug will lower the chime frequency but to my untrained ear i couldn’t tell the difference before and after the installation.
thingiverse
free
MendelMax Power Supply Mounting Brackets by DR2D
...he other side. the 3d printer frame width is 260mm on the inside where a 5mm screw can fasten to the aluminum extrusion inserts.
thingiverse
free
Pill Bottle Wrench by DR2D
... hand and the bottle in the other (push together and turn). there’s even a couple screw holes for permanent mounting if desired.
thingiverse
free
Filament Splicer by DR2D
...es do feed through the extruder nicely.
note: i’ve only tested the splicer with 3mm abs, but it should also work with 1.75mm abs.
thingiverse
free
Pocket Cars by DR2D
...e assembly should hold things in place.
for more railroad themed printing projects i refer you to https://3dprintedrailroad.com/.
Top
archibase_planet
free
Top
...top
archibase planet
top
top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
free
Range Top V36C top
...range top v36c top
3ddd
гриль
проф. гриль range top v36c top
archibase_planet
free
Top
...top
archibase planet
dresser kitchen furniture
top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Top
...top
archibase planet
bracket bar furniture
bar top - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
Top
...lty free 3d model top for download as ma, max, blend, and obj on turbosquid: 3d models for games, architecture, videos. (1579951)
turbosquid
$39
Top
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Top
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$15
top knifle
...top knifle
3dexport
top knifle
design_connected
$11
Drop Top
...drop top
designconnected
plumen drop top computer generated 3d model.
3d_export
$245
top of the material
...top of the material
3dexport
top of the material,commercial ceiling ceiling material, metal material
Simple
turbosquid
$1
Simple goblet (Taca simples)
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
simple bench
...simple bench
3dexport
the simple bench which can be used in simple projects or video-games.
3d_export
$5
simple knob
...simple knob
3dexport
simple knob
3d_export
$5
simple handle
...simple handle
3dexport
simple handle
3d_export
$5
simple button
...simple button
3dexport
simple button
3d_export
$5
simple spindle
...simple spindle
3dexport
simple spindle
3d_export
$5
simple wheel
...simple wheel
3dexport
simple wheel
3d_export
$5
simple chair
...simple chair
3dexport
simple blue chair
3d_export
free
Simple room
...simple room
3dexport
here is a simple but beautiful room
3ddd
free
SIMPLE | Кресло
...io cianfarra , simple
производитель area declic дизайн giulio cianfarra коллекция simple