90 mm brushless quad, 20mm stack by the_mighty_tibo

Last crawled date: 3 years ago

This is a 90 mm frame designed around a 20 mm stack with AIO esc and 56 mm props.
It also has a battery mount for a Turnigy nano-tech 300mah 2S 45~90C Lipo Pack and it fits 11 sized motors with 8.5 mm mounting holes.
https://hobbyking.com/en_us/turnigy-nano-tech-300mah-2s-45-90c-lipo-pack.html
assembly:
-the receiver goes in the bottom. there is a hole for the antenna to stick out.
-the esc goes on top of the receiver and the motor wires go through the arms.
-the rest is obvious.
https://www.youtube.com/watch?v=EkA2KNzaaaA
updates:
-still working on a camera mount
-my batteries arrived and appeared to be taller than anticipated-> increased the size of the battery holder
-the orangerx was was a little to big so i increased the thickness of the arms giving the receiver more space and it makes the frame a little stronger
-changed the motor mounts
-added a cam mount (for vm2751)
-maiden flight!!! still working on a decent tune (stock pids are garbage) and a video
-made the motor mounts stronger
-made a hole for the power cables in the base
-hopefully fixed the scaling issue
-build videohttps://youtu.be/ac9yFglx3_Q
-some minor changes