6S 18650 holder with XT30 output for TS-100

Last crawled date: 4 years, 2 months ago

I designed this battery pack primary for TS-100 soldering iron. But you can use it for any 24 V application e.g. Powering step down, PLC ...
The nominal Voltage is 22.2 V DC, Minimum is 18 V and fully charged is 25.2 V.
In a pack is build in complete BMS with cell balancing system & Volt meter .
The balance current of build in BMS is 62 mA
I also add a balance connector which is directly connected to the cells. You can use to check all cells voltages or connect a balance charger e.g. Imax B6, ISDT...
The spacers are used between BMS board & cell holder.
Part list:
6S BMS: https://aliexpi.com/KK55
2*3S holders: https://aliexpi.com/ysBc
Volt meter: https://aliexpi.com/5m9b
Switch: https://aliexpi.com/l1hN
XT-30 connector: https://aliexpi.com/L00m
Balance connector: https://aliexpi.com/0Lb3
Some 20AWG & 24AWG wires or 0.75mm^2 & 0.25 m^2