Thingiverse
69 Mustang Tach POD by jranger615
by Thingiverse
Last crawled date: 3 years ago
This is a POD for a AutoMeter Mini Tach 2 1/16". It includes an area for the upper light fixture and allows the 2 bolts to slide through at the rear.....
This requires a 1/8" Foam to be added to the the part that goes around the column, this is to prevent scratching and should also allow it to be fixed with out much movement
I used https://www.amazon.com/dp/B07RYW3Q46
I have added 3 versions:RivNUT - This version you use a 10-24 rivnut into the hole at the bottom of the top half and glue it in...It fits without the glue and seems pretty snug but glue it in just to be safe. I use a 3/4" bolt/screw
Bolt Setup - This one is made so you can use a bolt and nut to hold it together
Capture Nut - Allows you to use a 1/4" bolt and and insert a nut into the back of the bezel. Nut should be flat to each side to be centered properly. Works good with https://www.amazon.com/dp/B07TJN6L2J
***bottom-riv just has a smaller hole as i found the rivnut bolt was smaller but either can be used
This requires a 1/8" Foam to be added to the the part that goes around the column, this is to prevent scratching and should also allow it to be fixed with out much movement
I used https://www.amazon.com/dp/B07RYW3Q46
I have added 3 versions:RivNUT - This version you use a 10-24 rivnut into the hole at the bottom of the top half and glue it in...It fits without the glue and seems pretty snug but glue it in just to be safe. I use a 3/4" bolt/screw
Bolt Setup - This one is made so you can use a bolt and nut to hold it together
Capture Nut - Allows you to use a 1/4" bolt and and insert a nut into the back of the bezel. Nut should be flat to each side to be centered properly. Works good with https://www.amazon.com/dp/B07TJN6L2J
***bottom-riv just has a smaller hole as i found the rivnut bolt was smaller but either can be used
Similar models
thingiverse
free
Airgun Silencer w/1/2-20 and .4375 slip-on by euler357
...0 tap: https://www.amazon.com/dp/b004uuami6
10-24 tap: https://www.amazon.com/dp/b004uualim
warning: intended for airgun use only
thingiverse
free
Tommy's Tripod for Astronomical Equipment (TT-2) by tommyent
... latitude wedge without the tripod, see https://www.thingiverse.com/thing:4776560
build instructions and metric version to follow
thingiverse
free
Stop Motion Rig System by felbarrerac
...are store.
you can use some cyanoacrylate glue for added strength.
this would look great with golden straws and a black filament.
thingiverse
free
PVC Drill Guide
...ying vertical. if it's not, twist the undrilled end of the pipe a little as you drill the next hole to get back to vertical.
thingiverse
free
Fire Hydrant Birdhouse by jwl3701
...e:
~ 1 to 1.5 ft of small chain (3/8" length linked)
qty 6 of (m6) or (1/4-20) hex head bolts 16mm or 5/8" l
super glue
thingiverse
free
Flexible Solar Panel Mount by mrjadkowski
...plication.
print these upside down (i.e. you should be able to see the hex-shaped inset for the bolt head on top when you print).
thingiverse
free
Euby babycam tripod mount by jphalip
...need to glue a 1/4"-20 nut in the bottom hole.
i printed mine with 20mm layer height and petg. should work with pla as well.
thingiverse
free
PEX Arch - PVC Adapter by ShinyObjects
... set of nuts hold the bolts in place prior to adding the floor flange, plus they help keep the flange more centered on the bolts.
thingiverse
free
Fidget Nut Spinner - Wingnut2k #4 by wingnut2k
... 4mm but the bearing and 5/16" nuts will sit flush. you can shove/hammer the 1/2" nut in 2mm if it really bothers you.
thingiverse
free
Carmine Tripod support with 1/4" nut. by Spodesta
...4" nut for added resistance and easier use.
it can be used with a pistol grip too: http://www.thingiverse.com/thing:242016
Jranger615
thingiverse
free
69 Mustang Standard Dash Clock Delete Plate by jranger615
...elete plate for the standard rectangular clock dash
i've added a blank as well as one with a pony on it
print is abs or petg
thingiverse
free
1969 Mustang Single Din Radio Bezel by jranger615
... pocket version for people who dont want a radio
** requires 2 studs (i believe 67/68 head light bucket studs will work for this)
thingiverse
free
69 Mustang BUSS Fuse Adapter by jranger615
...ed into plastic.
contacts can be found here:http://www.digikey.com/product-detail/en/keystone-electronics/3557/36-3557-nd/2092485
thingiverse
free
F100 Crown Vic - Headlight Adapter by jranger615
...ate over the notch and 2 stock screws
install the headlight switch in the stock location of the original switch or next hole over
thingiverse
free
53-55 F100 - CV Conversion Cluster by jranger615
...l want to cut the metal bezel down to be even with the side mounts. i have added a picture showing the lines where i cut my bezel
Tach
3d_export
$15
D-Tach Chair
...orld scale centered at 0,0,0. clean topology units: millimeters product formats:<br>3ds max 2014 + v-ray materials, obj,fbx
3d_export
$15
sci-fi hi-tach home
...3dexport
my own design this is and including realwave file here. its a sci-fi scene , you can use in future's movie scene .
3dbaza
$4
D Tach chair (330494)
...d tach chair (330494)
3dbaza
d tach chair 3d model
thingiverse
free
Pistache qui tache by Corsaire
...i tache by corsaire
thingiverse
teste-sefqeznfqefoefknqaokfnqoergnorgnsldkfnvqrelkgnosdfknvldfknglsfdnxcnlkngreingteogqnsojnteoq
thingiverse
free
Mini Lathe Tach Holder by mvansomeren
... built in cable guide.
just use a little double-sided tape to mount the tach in the holder and to secure the holder to the lathe.
thingiverse
free
'81 Virago mini tach mount by DGA
...ses a mini tach/ telltale bought from ebay. mounts to the center of the head stock on top of the bar pad, using the center screw.
thingiverse
free
Honda Crf450R Tach Mount
...gned this for my 2006 crf450r. you have to frill your holes for mounting but that's easy enough. print at any infill desired.
sketchfab
$4
Miche K Iing Port Taches Noires
...clean uv’s. - miche k iing port taches noires - buy royalty free 3d model by l'atelier 5d (@lesateliers3d_officiel)
thingiverse
free
Tach-Temp Holder by PPGPrinter
...to the throttle itself. 30% infill keeps it pretty light. replace factory screws with some that are a little longer. good to go!
thingiverse
free
Gaslands Gear Phase Tach by Steveisbig
...hometer that i made to track gear phases in the tabletop game gaslands.
the dial and needle connect with magnets (1mmx5mm round).
69
3d_export
free
gaz 69
...gaz 69
3dexport
gaz 69. rendered blender and cycles.
design_connected
free
T.e. 69
...t.e. 69
designconnected
free 3d model of t.e. 69 by thomas eyck
3ddd
$1
Pillows 69
...pillows 69
3ddd
подушка
pillows 69. i hope you like it . thank you !
3d_export
$20
chevrolet camaro 69
...chevrolet camaro 69
3dexport
chevrolet camaro 69
3d_export
$20
chevrolet camaro 69
...chevrolet camaro 69
3dexport
chevrolet camaro 69
turbosquid
$29
Landscape 69
...squid
royalty free 3d model landscape 69 for download as obj on turbosquid: 3d models for games, architecture, videos. (1707361)
turbosquid
$15
Chair 69
...alty free 3d model chair 69 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1497570)
turbosquid
$15
Set-69
...oyalty free 3d model set-69 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1214141)
turbosquid
$8
Lamp 69
...yalty free 3d model lamp 69 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1500796)
turbosquid
$7
Table 69
...alty free 3d model table 69 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503895)
Mustang
3d_export
$20
mustang 1967
...mustang 1967
3dexport
mustang 1967
3d_export
$20
mustang 1971
...mustang 1971
3dexport
mustang 1971
3d_export
$20
mustang 1968
...mustang 1968
3dexport
mustang 1968
3d_export
$20
mustang 1965
...mustang 1965
3dexport
mustang 1965
3d_export
$5
Mustang 1968
...mustang 1968
3dexport
mustang 1968 lowpoly
3ddd
$1
Zapatillas mustang
...zapatillas mustang
3ddd
обувь
zapatillas clasicas mustang
turbosquid
$35
Mustang
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$35
mustang
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$30
Mustang
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_ocean
$69
Ford Mustang
...n
car ford mustang speed wheel
ford mustang high poly with details and materials used materials are included /.3ds/.obj/.fbx/.skp
Pod
design_connected
$13
Pod
...pod
designconnected
niche modern pod computer generated 3d model. designed by pyles, jeremy.
3d_export
$5
engine pod
...engine pod
3dexport
engine pod
turbosquid
$80
POD
...pod
turbosquid
royalty free 3d model pod for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1234976)
3ddd
$1
Pod 325
...pod 325
3ddd
пуф
pod 325
turbosquid
$4
PODS
...oyalty free 3d model pods for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1563118)
3d_export
$5
coworking pods
...coworking pods
3dexport
private pods for workspaces, offices
3ddd
$1
Pod Meeting
...pod meeting
3ddd
pod meeting , martela
146cm x 205cm
design_connected
$16
Pod 325
...pod 325
designconnected
department pod 325 computer generated 3d model.
3d_ocean
$5
Ariel Power Pod
...model ariel power pod ariel power pod, modeled in cinema 4d r14 and all materials are included. if you like it, please rate this
3ddd
$1
POD 325
...pod 325
3ddd
кресло мешок
кресло мешок pod 325, room 21 85x50x100cm.