60mm Fan Adapters Version 2 with Solidworks 2014 Source by DarkAlchemist

Last crawled date: 3 years, 1 month ago

After 2 years (almost to the day which is ironic) I decided to revisit my fan adapters and I redid them from the ground up (knowing I was going to be including the source) to make it simpler for you to modify the source how you wished. I also thickened the walls slightly to help improve the print and I changed over to a revolved extrude and cut in case someone wishes to have even a thicker wall or make different angles etc...
What these do is convert a different sized fan (25mm thick) for use on a 60mm x 10mm fan connector. By doing this your noise level and sound level can be EXTREMELY decreased while putting out more CFM than a 40mm can ever do.
For the 120mm, 92mm, and the 80mm fan mounts there are extra tall versions (30mm taller) that allow more airflow to pass.
If you use the source you can adjust the throat length easily by editing the feature named "Throat Length Here". I did not make this an equation driven distance as that would have been overkill and it is just simpler for you to adjust it at the source for something this trivial.