Thingiverse
4x4 Keypad Cover (snap tight cover) for RobotDyn pad by scrugless
by Thingiverse
Last crawled date: 3 years, 1 month ago
Hey kids - I found these 4x4 RobotDyn keypads (resistor ladder type) with three pins and had to get them cause they were cool and need one analog input (not counting vcc and grnd) to functionate. They come well packaged but because they are snap on buttons there is a lot of funky and sloppy play in them and they look really grodie without a cover - so I made one. you're welcome!
A few things:
1) here is the keypad ($3.50ish USA):
https://www.aliexpress.com/item/Button-Keypad-module-4x4-Analog-pin-connection/32635207928.html
2) This summary thing will have a ton of parenthetical content - (you've been warned)
3) this 'cover' is way easier to apply, coax, if you remove the buttons from this 4x4 (yes on this one [link above] they pull straight out (but what do i know if you bust it don't look at me! ) ) sometimes you will just accidentally pull off the clear cap (where underneath you can insert your printed art work or button number/letter etc) So remove all the buttons first. The first time I snapped this contraption on i almost cried well i also cut myself bad which might have also made me sad too, some.
4) carefully snap the thing over it (it goes one way only!) The gap is the top where it covers the connector and avoids the resisters. This is really hard to get on [I seem to have found a sadistic maker side] (please be wicked careful on the little razor sharp solder joints on the back cause - ouch and also bleeding.
5) NOW for a warning: short of hurling this at concrete to remove (which I don't recommend) - THIS FACE GRABBER IS ON THERE FOR GOOD! so please, please make sure you get all your stuff together and put the labels into your buttons cause you will have to pry this to get it off later (yeah i know cause i had to do it)
6) this is intended to be silicone'd down (see the small ridge around the entire thing where you would cut a hole in the console or what have you and glue around the hole then drop this thing in) honestly mine are so tightly snapped I wont even be screwing the circuit board down when I assemble it) [also the ridge around is tiny, like 1.5mm. why? because I am an idiot that's why. So measure this carefully before you cut a too huge hole in your Aunt Bettie's antique, obsidian, laminated console]
7) nope - no more stupid innumerated crud.
there you go!
ps. included in the zip is the Sketchup file too (it's got some wiggy-ness [coplanar {aka little triangles from hell} issues] in it) so you might not be having such a great time to edit it. (wow that had some nesting in it eh?)
snuggly push-buttony hugs!
A few things:
1) here is the keypad ($3.50ish USA):
https://www.aliexpress.com/item/Button-Keypad-module-4x4-Analog-pin-connection/32635207928.html
2) This summary thing will have a ton of parenthetical content - (you've been warned)
3) this 'cover' is way easier to apply, coax, if you remove the buttons from this 4x4 (yes on this one [link above] they pull straight out (but what do i know if you bust it don't look at me! ) ) sometimes you will just accidentally pull off the clear cap (where underneath you can insert your printed art work or button number/letter etc) So remove all the buttons first. The first time I snapped this contraption on i almost cried well i also cut myself bad which might have also made me sad too, some.
4) carefully snap the thing over it (it goes one way only!) The gap is the top where it covers the connector and avoids the resisters. This is really hard to get on [I seem to have found a sadistic maker side] (please be wicked careful on the little razor sharp solder joints on the back cause - ouch and also bleeding.
5) NOW for a warning: short of hurling this at concrete to remove (which I don't recommend) - THIS FACE GRABBER IS ON THERE FOR GOOD! so please, please make sure you get all your stuff together and put the labels into your buttons cause you will have to pry this to get it off later (yeah i know cause i had to do it)
6) this is intended to be silicone'd down (see the small ridge around the entire thing where you would cut a hole in the console or what have you and glue around the hole then drop this thing in) honestly mine are so tightly snapped I wont even be screwing the circuit board down when I assemble it) [also the ridge around is tiny, like 1.5mm. why? because I am an idiot that's why. So measure this carefully before you cut a too huge hole in your Aunt Bettie's antique, obsidian, laminated console]
7) nope - no more stupid innumerated crud.
there you go!
ps. included in the zip is the Sketchup file too (it's got some wiggy-ness [coplanar {aka little triangles from hell} issues] in it) so you might not be having such a great time to edit it. (wow that had some nesting in it eh?)
snuggly push-buttony hugs!
Similar models
thingiverse
free
RobotDyn 4x4 Keypad Case - Snap-fit enclosure
... come too far forward. there's some room for improvement for the snapping cantilevers, but they've working for me so far!
thingiverse
free
RobotDyn 4x4 KeyPad Breakout Single Encoder by daedalas1981
...encoder version
daedalas1981 github project files
nicohood's hid-project library
robotdyn 4x4 keypad
amazon - rotary encoders
thingiverse
free
RobotDyn 4x4 KeyPad Breakout Dual Encoder by daedalas1981
...ncorder version
daedalas1981 github project files
nicohood's hid-project library
robotdyn 4x4 keypad
amazon - rotary encoders
thingiverse
free
4X4 button keypad housing
...making then easier to use.
since this is a work in progress it's not quite perfect but hopefully someone will find it useful.
thingiverse
free
Remix - 9V battery safety cover by PocketBrain
...e snap off. also, i posted all four versions as .stl files (9vcover*.stl) in addition to the edited .123dx file.
upgrade! :-)
thingiverse
free
Genie Remote Keypad Fix by kmccon
...all. i suggest either tapping or pre-installing and then removing the screws to cut the threads before installing in the keypad.
thingiverse
free
Winwing F/A-18 throttle slew button by Otso
...om behind the button hat with two small screwdrivers.
i've included the fusion 360 file so you can modify it to your liking.
thingiverse
free
Bar Keepers Friend Covers by CCryder
...oked cooler.
per amarand's description in the original, i haven't had any trouble with the cleanser bursting into flames!
thingiverse
free
4x4 Keypad box by haleyma
... didn't have to use screws.
this board came with the inventr.io adventure kit: 30 days lost in space kit: https://inventr.io/
3dwarehouse
free
KeyPad Matrix 4x4 button
...keypad matrix 4x4 button
3dwarehouse
keypad matrix 4x4 button #16_key #4x4 #arduino #button #keypad #matrix
Robotdyn
thingiverse
free
Case for RobotDyn Thyristor AC Switch by vtoryh
...case for robotdyn thyristor ac switch by vtoryh
thingiverse
case for robotdyn thyristor ac switch.
thingiverse
free
RAMPS LCD ENCLOSURE (RobotDyn) by jorgelousada
...sada
thingiverse
this is a enclosure for robotdyn version of reprapdiscount smart controller.
printed in pla 0.2mm / 30% infill.
thingiverse
free
Robotdyn Screen case for Voron by ubernero
...
case i tweaked to support the robotdyn reprap discount smart controller for my voron build. its not very polished but it works.
thingiverse
free
Logic level converter RobotDyn by ALTerNative
...m aliexpress (https://goo.gl/3v8iro). easy to print and mount. but need a m2 screews to consolidate board in case, i used a glue.
thingiverse
free
RobotDyn 4x4 KeyPad Breakout Single Encoder by daedalas1981
...encoder version
daedalas1981 github project files
nicohood's hid-project library
robotdyn 4x4 keypad
amazon - rotary encoders
thingiverse
free
RobotDyn 4x4 KeyPad Breakout Dual Encoder by daedalas1981
...ncorder version
daedalas1981 github project files
nicohood's hid-project library
robotdyn 4x4 keypad
amazon - rotary encoders
thingiverse
free
Top Enclosure for Robotdyn Smart Controller by aurelienpi
... smart controller (with sd card) by robotdyn.
we printed it to validate a design but it can be used on top of any electronic box.
thingiverse
free
Infinity Cube case for RobotDyn WIFI NodeM ESP8266
...6
thingiverse
infinity cube case for use with the robotdyn wifi nodem esp8266https://robotdyn.com/wifi-nodem-esp8266-cp2102.html
thingiverse
free
RobotDyn STM32MINI Case
...nternal and an external version.
of course, the cases can also be used for something else.
4x m2x18mm countersunk screw
4x m2 nut
thingiverse
free
RobotDyn Joystick and Arduino Nano ergonomic casing by CezaryWernik
... (associated material): https://majsterkowo.pl/slizgacz-rc/
other associated material : https://www.thingiverse.com/thing:2473228
Keypad
turbosquid
free
Keypad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$19
reply systems keypad
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Keypad Mobile Phone untextured
...del keypad mobile phone untextured for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1480463)
3d_export
$17
Alarm system keypad 3D Model
... home security protection alarm digital door keypad identification equipment
alarm system keypad 3d model kreatura 92421 3dexport
turbosquid
$20
Russound UNO-S2 Keypad Switch
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Russound A-K5L Keypad with LCD Display 3D Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
ave pc-keypad
...14649 vertices) these modifiers have been applied.<br>the additional formats have been exported with the modifiers applied.
cg_studio
$16
Alarm system keypad low poly3d model
...vray max
.max .obj .fbx - alarm system keypad low poly 3d model, royalty free license available, instant download after purchase.
turbosquid
$8
Russound UNO S1 Home Audio Keypad Tuner 3D Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$7
Russound KPL Advanced System Home Audio Keypad 3D Model
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
4X4
turbosquid
$12
4x4 Bundle
...bosquid
royalty free 3d model 4x4 bundle for download as obj on turbosquid: 3d models for games, architecture, videos. (1243408)
turbosquid
$6
4x4 Pickup
...bosquid
royalty free 3d model 4x4 pickup for download as obj on turbosquid: 3d models for games, architecture, videos. (1243410)
turbosquid
$6
4x4 SUV
...turbosquid
royalty free 3d model 4x4 suv for download as obj on turbosquid: 3d models for games, architecture, videos. (1243409)
turbosquid
$5
4x4 Car
...rbosquid
royalty free 3d model 4x4 car for download as blend on turbosquid: 3d models for games, architecture, videos. (1545830)
turbosquid
$1
4X4 ROOM
...urbosquid
royalty free 3d model 4x4 room for download as max on turbosquid: 3d models for games, architecture, videos. (1415863)
turbosquid
$50
Chassis 4x4
...free 3d model chassis 4x4 for download as ige, obj, and sldas on turbosquid: 3d models for games, architecture, videos. (1284188)
turbosquid
$29
Military 4X4
... free 3d model military 4x4 for download as 3ds, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1339605)
turbosquid
$20
Military 4X4
...ty free 3d model military 4x4 suv for download as 3ds and obj on turbosquid: 3d models for games, architecture, videos. (1340520)
turbosquid
$10
Bookshelf (4x4)
... model bookshelf (4x4) for download as 3ds, max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1410538)
turbosquid
$75
trabant 4x4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Pad
turbosquid
$15
Note Pad Writing Pad
...oyalty free 3d model note pad writing pad for download as max on turbosquid: 3d models for games, architecture, videos. (1309269)
3ddd
$1
Bed Padded
...bed padded
3ddd
padded bed , pixellin
padded bed , pixellin , bed 3d model
3d_export
$5
Padded stool
...padded stool
3dexport
padded stool
3d_export
free
Padded stool
...padded stool
3dexport
padded stool
3d_export
$5
pads
...pads
3dexport
3d_ocean
$2
mouse pad
...mouse pad
3docean
3d models computer electronics mouse
mouse pad 3d models. it’s mouse pad.
3d_export
$5
Padded stool
...padded stool
3dexport
leather padded stool on a metal base
3d_export
$5
Padded stool
...padded stool
3dexport
leather padded stool on a metal base.
3d_export
$8
Padded chair
...padded chair
3dexport
padded chair, black spout and light blue leatherette.
3d_export
$7
Padded Stool
...padded stool
3dexport
padded stool, black spout and light blue leatherette.
Snap
turbosquid
$10
SNAP ACTION SWITCH
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Trigger Snap Hook 3D Model
...ty climbing snap-hook snap-link link shackle holder latch swivel ring equipment
trigger snap hook 3d model firdz3d 88191 3dexport
3d_export
$15
Battery Snap 3D Model
...ial tool part electricity wire
battery snap 3d model download .c4d .max .obj .fbx .ma .lwo .3ds .3dm .stl firdz3d 106985 3dexport
turbosquid
$8
Pro Snap Weight Clip
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Стул Snap chair by Karim Rashid
... snap chair
дизайнер карим рашид. пластик, металл. моделилось по фото с сайта дизайнера, материалы vray
turbosquid
$10
Stainless Steel Snap E Ring
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Пуфы Porada Contract, пуф Porada Snap
...уф фабрика porada артикул snap
коллекция newwork the greatness
материал - кожа, отделка - капитоне.
высота -46, диаметр -52 .
3d_export
$25
press fit of automobile hub bearing and snap ring
...splacement curve is monitored during the pressing process. welcome to download and learn if you like. there are step files in it.
3d_export
free
Download free Clock Diamantini Domeniconi Snap 3D Model
...ccessory design home style modern living room decor free
clock diamantini domeniconi snap 3d model modelplusmodel 29252 3dexport
3d_export
$16
womennp2maxfbxobjmb
...womennp2maxfbxobjmb 3dexport polygonal model of a girl.<br>you can easily snap a skeleton for...
Tight
design_connected
$16
Tight
...tight
designconnected
molteni & c tight computer generated 3d model. designed by laviani, ferruccio.
turbosquid
$10
Y178 Tights
...urbosquid
royalty free 3d model y178 tights for download as on turbosquid: 3d models for games, architecture, videos. (1612407)
turbosquid
$30
woman shirt tight
...y free 3d model woman shirt tight for download as max and pac on turbosquid: 3d models for games, architecture, videos. (1452687)
turbosquid
$30
Female tight polo
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$8
Tight Sexy Dress
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Кресло Molteni&C Tight
...t
3ddd
molteni&c , tight
кресло molteni&c; tight, по размерам, с текстурами.
turbosquid
$40
Woman Sexy Skin Tight
...ee 3d model woman sexy skin tight for download as max and pac on turbosquid: 3d models for games, architecture, videos. (1456048)
turbosquid
$30
Lady in Tight Pants and Boot
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$6
Pants Skin Tight Leggings
...ght leggings for download as max, max, 3ds, fbx, pac, and obj on turbosquid: 3d models for games, architecture, videos. (1617184)
turbosquid
$7
Fendi Casa Belt Tight Sofa
... fendi casa belt tight sofa for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1597436)
Cover
archibase_planet
free
Cover
...cover
archibase planet
cover place setting
cover n170807 - 3d model for interior 3d visualization.
3ddd
$1
cover
...cover
3ddd
ковер , круглый
cover decor
archibase_planet
free
Cover
...cover
archibase planet
cover place setting setting
servis-cafe1930 - 3d model for interior 3d visualization.
turbosquid
free
Coverings
...rings
turbosquid
free 3d model coverings for download as dwg on turbosquid: 3d models for games, architecture, videos. (1279391)
3d_export
$5
plug cover
...plug cover
3dexport
plug cover
turbosquid
$25
Covers
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
manhole cover
...manhole cover
3dexport
manhole cover gost, stl, step
turbosquid
$5
Street Gas Cover Manhole Cover
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Bed cover
...bed cover
3ddd
постельное белье
very useful bed cover
3d_export
$5
cpu cover
...cpu cover
3dexport
cpu cover, cpu box, sheet metal container