Thingiverse
40mm to 60mm Fan Adapter for Modern Stern Pinball Machines by plasticbugs
by Thingiverse
Last crawled date: 2 years, 11 months ago
This is an adapter which allows you to connect a supplemental fan to your Stern Pinball machine power supply fan to prevent the smaller, much noisier fan from spinning up. The larger fan mounted above should prevent the smaller fan from kicking on. This adapter saves you from opening the covered power supply and replacing the VERY NOISY smaller fan (and thus voiding your warranty).
DID I MENTION HOW NOISY THAT SMALL FAN IS?
Print with larger fan opening flat on the print bed. Requires supports for the single screw hole on the 40mm side.
This adapter is for mounting a secondary (larger and quieter) fan on top of the very noisy pre-existing power supply fan inside of modern Stern pinball machines. The fan I'm using is a Noctua NF-A6x25, which runs on 12 Volts and can be connected to the power supply circuit board directly below and to the left of the power supply enclosure.
This adapter connects to the power supply via the existing front screw, the rear screw can be left in place. Then, the Noctua fan attaches to the adapter using the rubber posts that come with the fan.
I'm using the three-pin connector from Pinball Life: https://www.pinballlife.com/spike-12-volt-backbox-power-adapter-cable.html -- and have connected the ground and power wires to the fan's power and ground wires.
DID I MENTION HOW NOISY THAT SMALL FAN IS?
Print with larger fan opening flat on the print bed. Requires supports for the single screw hole on the 40mm side.
This adapter is for mounting a secondary (larger and quieter) fan on top of the very noisy pre-existing power supply fan inside of modern Stern pinball machines. The fan I'm using is a Noctua NF-A6x25, which runs on 12 Volts and can be connected to the power supply circuit board directly below and to the left of the power supply enclosure.
This adapter connects to the power supply via the existing front screw, the rear screw can be left in place. Then, the Noctua fan attaches to the adapter using the rubber posts that come with the fan.
I'm using the three-pin connector from Pinball Life: https://www.pinballlife.com/spike-12-volt-backbox-power-adapter-cable.html -- and have connected the ground and power wires to the fan's power and ground wires.
Similar models
thingiverse
free
Sapphire pro PSU / Power Supply Cover Noctua 92x14 by Pjock
...r as power supplies 24v and fan is 12, my run at around 10v and totally silent.
wires on fan
black = ground (-)
yellow = 12 v (+)
thingiverse
free
Noctua 40mm Fan Adapter MP Mini Select (V1 & V2) by Murray_L
...m/noctua-cooling-blades-bearing-nf-a4x10/dp/b009nqlt0m/ref=sr_1_2?dchild=1&keywords=noctua+40mm&qid=1614718218&sr=8-2
thingiverse
free
BIQU B1 Noctua hotend fan adapter by ReZanc
...ctly you should have a working noctua hotend fan :)
hope i wrote everything clearly enough.
have fun and happy silent printing :)
grabcad
free
Power supply housing
...pply. the yellow and red wires are connected to the ammeter, this will allow you to watch the current strength at 5 and 12 volts.
thingiverse
free
FAN HOLDER 92mm 12-24V by John8
... each end. the fan gard may be better used as a speaker cover, as it makes the fan very noisy when placed on the back of the fan.
thingiverse
free
Ender 5 psu shim for noctua fan 60x60x25 by Eriwyr
...upply is very dangerous and not recommended, you do this at your own risk. i do not guarantee that these shims are not dangerous.
thingiverse
free
Anet A8 Power Supply Cover by Mr_Fallis
...e
anet a8 power supply with mosfet holder built in with cooling fan 12 volt fan can be wired directly to the mosfel power side.
thingiverse
free
30mm to 40mm fan adapter by papi8570
...p in fusion360 and fit was perfect first time out. uses 3x12mm screws to hold it on and noctua rubber holders for the fan itself.
grabcad
free
Tevo Flash - Internal 40mm Noctua Fan Bracket
...noctua nf-a4x10 flx 40mm http://www.c3d.at/g?i=nf-a4x10&p=4
dc-dc buck converter http://www.c3d.at/g?i=mp1584en&p=4
.
thingiverse
free
120mm Fan Duct for 24V33A Power Supply by lollandster
...y so this will allow me to use a 120mm noctua fan.
support will be needed in this version, but not much.
outlet is 120x60mm outer
Plasticbugs
thingiverse
free
Max Key Cap (Sam and Max) by HeadGreebo
...a redragon keyboard with no problem). based on plasticbugs (https://www.thingiverse.com/plasticbugs) ...
thingiverse
free
Krang Android NECA Belt Base for Stern TMNT Pinball Playfield by plasticbugs
...where there are one or two screws in the "pigeon roof" plastic that can be used to secure the android to the playfield.
Stern
turbosquid
$12
Stern Winch
...y free 3d model stern winch for download as max, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1591899)
3d_export
$65
stern restaurant
...stern restaurant
3dexport
simple rendering of the scene file
3ddd
$1
Robert A.M. Stern Collection - Tete-a-tete
...obert a.m. stern collection - tete-a-tete
3ddd
robert a.m. stern collection - tete-a-tete
www.ramscollection.com
fbx + obj + 3ds
turbosquid
free
free hair model of a stern woman
...3d model free hair model of a stern woman for download as max on turbosquid: 3d models for games, architecture, videos. (1599099)
turbosquid
$23
Jamie Stern Thom dining chair
...mie stern thom dining chair for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1248426)
3ddd
$1
Team 7 / STERN Coffee Table by Jacob Strobel
...ddd
журнальный , круглый
http://www.team7.at/en/livingroom/coffee-tables/stern
turbosquid
$5
7.92x57mm-German-Exerzier-Patrone-S-stern
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$12
Children bicycle STERN
...*************************** hope you like it! also check out my other models, just click on my user name to see complete gallery.
3d_export
$50
Riva Aristone
...is 6.7 meters long and has a characteristic rounded stern for all the time, 823 riva ariston models were...
3d_export
$105
roks seoul ffg-821 daegu class frigate
...significantly changed. the hangar and a hellicopter deck on stern has been enlarged to support the operation of a...
Pinball
turbosquid
$25
Pinball
...id
royalty free 3d model pinball for download as jpg and obj on turbosquid: 3d models for games, architecture, videos. (1326044)
3d_ocean
$15
Pinball
...rs. play field texture includes bold targets and glow effects. nity 3d compatible models 3ds,fbx and obj have uvs works correc...
turbosquid
$10
pinball
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Pinball 3D Model
...pinball 3d model
3dexport
pinball star wars jedy darth vader death lightsaber
pinball 3d model buncic 40964 3dexport
turbosquid
$28
Pinball 3DS
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$56
Cactus_Canyon Pinball Machine
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
cg_studio
$56
TAXI Pinball Machine3d model
... machine3d model
cgstudio
.max - taxi pinball machine 3d model, royalty free license available, instant download after purchase.
3d_export
$99
Addams Family Pinball 3D Model
...family pinball arcade game machine amusement coin slot coinop fun parlour
addams family pinball 3d model zarday321 13511 3dexport
3d_export
$68
KISS Pinball Machine 3D Model
...iss pinball machine arcade amusement game fun slot coin coinop penny skill
kiss pinball machine 3d model zarday321 13961 3dexport
3d_export
$56
Rudys Funhouse Pinball 3D Model
... amusement pinball machine slot coin coinop fun game skill rudy funhouse
rudys funhouse pinball 3d model zarday321 13855 3dexport
60Mm
turbosquid
$79
Motorbobm 60mm
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
whell cap batman 60mm
...whell cap batman 60mm
3dexport
whell cap batman 60mm
3d_export
$5
tipping sphere 60mm
...ipping sphere 60mm
3dexport
three-way tipper trailer rear tipper ball. screw-on design, 60mm diameter. designed with se program.
3d_export
$40
pendant lion
...lion 3dexport this is pendant lion of catier. size 60mm ...
3d_export
$5
soap
...model of a soap bar. .stl file 30mm x 60mm ...
3ddd
$1
paulmann, premium line turbo, led
...premium line turbo, led 3ddd paulmann d 97mm, h 60mm led 1x10w;http://www.paulmann.com арт....
3d_export
$5
Hex Spacers M3 Male-Female
...hex spacers m3 male-female with length from 5mm to 60mm for printed circuit boards. step...
3ddd
$1
Casamania Marie Antoinette Pop
...antoinette pop cabinet material: limewood, mdf, walnut dimensions - 60mm x 380mm x 1000mm casamania marie antoinette pop coffee...
3d_export
$5
t-light candle holder
...led candles before or after assembly. * size : 60mm x 60 mm x...
3ddd
$1
Светильник (VANAMO PENDANT)
...приятную атмосферу. height- 600mm diametr- 150mm; 100mm; 80mm; 50mm; 60mm материал плафонов -прозрачное и матовое градиентное стекло. приятного...
40Mm
turbosquid
$10
40MM Bullet
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$49
40mm Vickers-Terni
... free 3d model 40mm vickers-terni for download as lwo and obj on turbosquid: 3d models for games, architecture, videos. (1260063)
turbosquid
$3
40mm grenade M9XX
...y free 3d model 40mm grenade m9xx for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1408150)
turbosquid
$3
40mm grenade M3XX
...y free 3d model 40mm grenade m3xx for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1408145)
turbosquid
$3
40mm grenade M1XX
...y free 3d model 40mm grenade m1xx for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1408144)
turbosquid
$8
40mm Smith & Wesson
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
Free 40mm grenade M433
...e 3d model free 40mm grenade m433 for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1404768)
turbosquid
$98
40mm 6G30 grenade launcher
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Famas G2 M203 40mm.
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
40mm Bofors TNT-11606
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Adapter
3d_export
$10
Adapter 3D Model
...adapter 3d model
3dexport
adapter
adapter 3d model mur 20260 3dexport
archive3d
free
Adapter socket 3D Model
...dapter socket adapter
adapter socket n090211 - 3d model (*.3ds) for interior 3d visualization.
turbosquid
$400
cell adaptation
...
royalty free 3d model cell adaptation for download as blend on turbosquid: 3d models for games, architecture, videos. (1701655)
archive3d
free
Adapter 3D Model
...ups pc equipment
adapter extron n180813 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$5
usb adapter
...royalty free 3d model usb adapter for download as ige and stl on turbosquid: 3d models for games, architecture, videos. (1582234)
turbosquid
$15
Power adapter
...free 3d model power adapter for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1510024)
turbosquid
$8
USB adapter
...e 3d model usb adapter for download as max, fbx, obj, and dwg on turbosquid: 3d models for games, architecture, videos. (1713542)
turbosquid
$30
adapter.3ds
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Nokia Adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$15
Universal adapter
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Fan
3d_export
$5
fan
...fan
3dexport
fan 3d model, table fan, fan, electric fan, ventilator
archibase_planet
free
Fan
...fan
archibase planet
fan large fan
fan out n260707 - 3d model for interior 3d visualization.
archibase_planet
free
Fan
...fan
archibase planet
fan ceiling fan ventilator
fan stealth n300615 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$15
fan
...fan
3dexport
is an ancient fan
3ddd
$1
Fan-C-Fan by marco gallegos
...n-c-fan by marco gallegos
3ddd
вентилятор , marco gallegos
fan-c-fan by marco gallegos
3d_export
$10
fan
...fan
3dexport
a detailed fan designed for home or space blowing is now available for only 19.99!
turbosquid
$1
Fan
...fan
turbosquid
free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1427865)
turbosquid
$14
Fan
...fan
turbosquid
royalty free 3d model fan for download as on turbosquid: 3d models for games, architecture, videos. (1415642)
3ddd
$1
Светильник Fan
...светильник fan
3ddd
fan , italamp
светильник fan, производитель italamp
turbosquid
$25
Fan
...fan
turbosquid
royalty free 3d model fan for download as c4d on turbosquid: 3d models for games, architecture, videos. (1483246)
Machines
archibase_planet
free
Machine
...machine
archibase planet
sewing-machine sewing machine equipment
singer machine- 3d model for interior 3d visualization.
archibase_planet
free
Machine
...hine
archibase planet
percolator equipment coffee-machine
machine n230708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Machine
...chibase planet
percolator coffee-machine kitchen equipment
coffee machine - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Slot machine
...ase planet
slot machine slot-machine playing machine
slot machine n260311 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
turbosquid
$7
Machine
...ne
turbosquid
royalty free 3d model machine for download as on turbosquid: 3d models for games, architecture, videos. (1391792)
3d_ocean
$10
War machine
...war machine
3docean
camuflage machine robot war war machine
war machine created in 3dmax 2009 15.497-poly count
turbosquid
$7
machine
...turbosquid
royalty free 3d model machine for download as obj on turbosquid: 3d models for games, architecture, videos. (1452674)
3d_ocean
$12
Weighing-machine
...weighing-machine
3docean
market shop weighing-machine
3d model weighing-machine
archibase_planet
free
Sewing machine
...ine
archibase planet
sewing machine sewing-machine
sewing machine n080311 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Coffee machine
...se planet
coffee machine percolator coffee-machine
coffee machine n010715 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
Modern
3d_export
$8
Modern pipo chair Modern furniture
...modern pipo chair modern furniture
3dexport
modern pipo chair. modern furniture
3d_export
$5
modern chair
...modern chair
3dexport
the modern chair for modern interior.
3ddd
$1
modern
...modern
3ddd
двери
коллекция modern
primavera-f, marilin, lago art
фабрика дверей папа-карло
3d_ocean
$19
Modern house
...modern house
3docean
architecture buildin house modern
modern house
3ddd
free
Modern bench
... bench , скамья , лавка
modern bench
3d_ocean
$25
Modern Bed
...modern bed
3docean
modern bed
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas
3d_export
$20
modern sofas
...modern sofas
3dexport
modern sofas