4 Digits Modern Wall Clock by ximiki_veltiosi 3d model
Warning. This content is not moderated and could be offensive.
pistol
3dmdb logo
Thingiverse
4 Digits Modern Wall Clock  by ximiki_veltiosi

4 Digits Modern Wall Clock by ximiki_veltiosi

by Thingiverse
Last crawled date: 3 years, 1 month ago
4 Digits Wall clock 12, 3, 6 and 9.
Each digit is 102mm height, 35mm width and 20mm depth. You can resize it accordingly through your slicer.
Used an UTS Shaft mechanism 56mm x 57,5mm x 17mm an easy to find and low cost (approx. 6euros), otherwise you can use from an old or broken clock of yours. Along with that, purchased a pair of indexes 215mm and 140mm, in black metal for 3 euros.
Built a small box to surround and hide the mechanism 59mm x 59mmX18mm. Do not print it if you don’t go with the same dimensions’ mechanism or smaller. In any case, if you do so, to mount the surround box with the mechanism you can use 2 face tape or thermo silicone pistol to glue them.
The clock size diameter should be around 50-55cm, or upon your convinience.
Digits Mounting can be achieved with any glue, 2 face tape, etc. depending the wall material.
Place the Digits properly:
Take a small spike put it on the wall and take a string with the length of the desire radius your clock should be. One way of the string is tightened loose on the spike while the other side wrap a pencil to draw the circle on your wall. Pencil , so to be able to remove the reaming marks later. You might need a 2nd person to help either holding the spike or drawing the circle. Mark the 4 points in 0, 90, 180 and 270 degrees by using a measuring rod.
Please make sure the mechanism is centered with the spike point used for the digits alignment (not the mounting point of the mechanism!!!Be careful on that!)
Optional you can print 1 and 2 in a smaller scale so your clock have 12 , 1, 2, 3 , 6 and 9. Have shared a printscreen from Autocad with this idea as well.

Tags