Thingiverse
4-BARREL DERRINGER CAP GUN TOY by puhsketti_prints
by Thingiverse
Last crawled date: 2 years, 11 months ago
Made the files free! Thank you for everyone who purchased this. It really helped me through a hard time!
Build video: https://youtu.be/Fe_tGZ5SJdc
Check out some videos of the toy working here: https://www.instagram.com/puhsketti_prints/
UPDATE /June 15, 2020: I have made some changes to the skeleton frame pieces and the hammer_head to increase the strength of a thin section.
UPDATE /June 11, 2020: I have found an issue with the original hammer_head.STL file and have updated it. If you downloaded the files before June 11, please download them again and use the new part called hammer_head_shorter_fins.STL in the Internals folder.
A toy based on 4-barrel configuration derringer pistols. The toy features a functional dual-action trigger mechanism. The toy requires 3 common steel springs, two elastic rubber bands, 17 M2 hex socket cap screws, 7 M2 nuts, and 4 M2 washers. For ammo, I use common plastic strip caps. More detail is provided in the files.
This is not a real firearm and cannot function as such, Makers should be cautious and check with their local laws before downloading the files. Please observe all local laws when making such an item. Use this model at your own risk! Do not try to fire real ammunition! I am not liable for any use or misuse of this model!
When assembling, make sure all moving parts move freely. Do not over tighten any screws!
This project REQUIRES quite a bit of skill, tinkering ability, and a very well tuned printer. I cannot guarantee that you can make this item fully functioning. I DO guarantee that the files are printable and even if you don't get the trigger functioning properly, you will have a cool display piece if nothing else.
WEAR SAFETY GLASSES AT ALL TIMES WHILE ASSEMBLING AND PLAYING WITH THIS TOY!!!!!!!!!
NEVER POINT A TOY GUN AT ANOTHER PERSON, YOURSELF, OR AN ANIMAL EVEN IF IT IS UNLOADED!
POP CAPS AWAY FROM YOUR EARS. HEARING PROTECTION IS ALWAYS A GOOD IDEA.
Required materials:
1.) Filament of your choice! PLA and PETG both will work well for all of the parts. I have mainly used PLA for these toys and have had no real issues with the material. Check your local laws about cap gun toys before making color selections. Most places require a bright orange tip on the barrel of the toy, or the toy to be manufactured from brightly colored plastics. I have just used a simple "filament swap" technique for the top 5mm to 21mm of my barrels to give them an orange tip.
2.) printed parts:
1x left frame (choose between the skeleton frame and the solid frame. I have done a lot more testing with the skeleton frame and it is easier to print and easier to trobleshoot, so I recommend starting with the skelton frame.)
1x right frame
1x barrel (choose a barrel. there are several variants including 125mm barrels or 75mm barrels)
1x left grip (there are several grip variants included)
1x right grip
1x hammer arm
1x hammer head
1x hammer spring inner
1x hammer spring outer
1x hand
1x latch_L
1x latch_R
1x rachet
1x rachet_arm_stop
1x sear (if the regular sear does not function correctly for you, there are several others provided in the Experimental_parts folder"
1x trigger
4x(or more) ammo shells (choose betwwen all-plastic ammo shells or ammo designed with an anvil insert made from metal tubing)
3.)screws/nuts/washers:
4x m2 washers
7x m2 nuts
hex socket head cap screws:
4x m2x10mm (FOR THE FIRING PIN, I HIGHLY RECOMMEND USING A 8MM SCREW, BUT A 9MM OR 10MM SCREW WILL ALSO WORK. THE SHORTER SCREW GIVES MORE CONSITENT FIRING PIN POSITIONING)
6x m2x15mm or 16mm
4x m2x20mm
3x m2x5mm
4.) springs:
3 springs are required. I used the "Everbilt Spring Assortment Kit (84-Pack)" from my local Home Depot, but similar metric and imperial springs should be easy to source elsewhere and should work fine.
hammer spring: (diameter=11/32in, length=1in , wire diameter=~0.5in) OR (diameter=8mm, length=25mm, wire diameter=~1mm)
trigger spring: (diameter=11/64in, length=1.5in, wire diameter=~0.2in) OR (diameter=4mm, length=35mm, wire diameter=~0.5mm)
barrel latch spring: (diameter=11/64in, length=5/8in, wire diameter=~0.01in) OR (diameter=4mm to 6mm, length=15mm, wire diameter=~0.3mm)
5.) rubber/elastic bands:
I got my rubber bands out of a small assortment pack from my local office supply store.
1x rubber band cross section: ~(1.5mm x 1mm) unstretched/uncut length: ~85mm
1x rubber band cross section: ~(3mm x 1mm) unstretched/uncut length: ~65mm
6.) The ammo requires caps! I like "star caps" plastic strip caps because they are easy to find and cheap, but pretty much any other plastic caps should work just fine.
7.) optional but recommended:
3.5mm OD x ~1.5mm ID metal tube (brass or stainless steel or any other metal should work fine) cut into ~10mm lengths. This is for making more durable ammo for the toy. The all-plastic ammo's durability relies heavily on the imact strength and layer adhesion of the filament used. Using metal tubing for the anvil will help the ammo shells last a lot longer. The only source i could find for this diameter of tubing was "uxcell 3.5mm OD 1mm wall thickness brass tube" on aliexpress. It may be possible to use 4mm OD tubing instead, but i personally havent tested that(I ordered 4mm tubing several months ago but it never arrived). There's an STL for 4mm tubing ammo in the Experimental_parts folder.
Superglue is helpful for securing the metal anvils in the plastic ammo shells, securing orange tips to the barrels of the toy, or if you need to repair any damaged printed parts.
White lithium grease is very useful for lubricationg moving parts.
3D PRINTING SETTINGS
Models are optimized for a 0.4mm nozzle, 0.4mm line width. and 0.2mm layer height. Supports are required and should be set to "everywhere" in your slicer. Use a support roof. I recommend a support roof of 0.4mm thickness at 90 to 100% density. Cura's support settings "fan speed override" and "supported skin fan speed are useful for getting easier to remove supports. PLA and PETG should work fine in all parts of the model. I used a wall thickness of 1.2mm and a infill percentage of 20% for most parts. I recommend printing the sears with a wall thickness of 3mm so they are more durable. Parts should import into your slicer in the correct orientation! I don't recommend any other print orientations. Z-seam location should be set to inside corners. For cylindrical parts like the ammo and the barrel, i recommend aligning the seam for better surface finish.
Build video: https://youtu.be/Fe_tGZ5SJdc
Check out some videos of the toy working here: https://www.instagram.com/puhsketti_prints/
UPDATE /June 15, 2020: I have made some changes to the skeleton frame pieces and the hammer_head to increase the strength of a thin section.
UPDATE /June 11, 2020: I have found an issue with the original hammer_head.STL file and have updated it. If you downloaded the files before June 11, please download them again and use the new part called hammer_head_shorter_fins.STL in the Internals folder.
A toy based on 4-barrel configuration derringer pistols. The toy features a functional dual-action trigger mechanism. The toy requires 3 common steel springs, two elastic rubber bands, 17 M2 hex socket cap screws, 7 M2 nuts, and 4 M2 washers. For ammo, I use common plastic strip caps. More detail is provided in the files.
This is not a real firearm and cannot function as such, Makers should be cautious and check with their local laws before downloading the files. Please observe all local laws when making such an item. Use this model at your own risk! Do not try to fire real ammunition! I am not liable for any use or misuse of this model!
When assembling, make sure all moving parts move freely. Do not over tighten any screws!
This project REQUIRES quite a bit of skill, tinkering ability, and a very well tuned printer. I cannot guarantee that you can make this item fully functioning. I DO guarantee that the files are printable and even if you don't get the trigger functioning properly, you will have a cool display piece if nothing else.
WEAR SAFETY GLASSES AT ALL TIMES WHILE ASSEMBLING AND PLAYING WITH THIS TOY!!!!!!!!!
NEVER POINT A TOY GUN AT ANOTHER PERSON, YOURSELF, OR AN ANIMAL EVEN IF IT IS UNLOADED!
POP CAPS AWAY FROM YOUR EARS. HEARING PROTECTION IS ALWAYS A GOOD IDEA.
Required materials:
1.) Filament of your choice! PLA and PETG both will work well for all of the parts. I have mainly used PLA for these toys and have had no real issues with the material. Check your local laws about cap gun toys before making color selections. Most places require a bright orange tip on the barrel of the toy, or the toy to be manufactured from brightly colored plastics. I have just used a simple "filament swap" technique for the top 5mm to 21mm of my barrels to give them an orange tip.
2.) printed parts:
1x left frame (choose between the skeleton frame and the solid frame. I have done a lot more testing with the skeleton frame and it is easier to print and easier to trobleshoot, so I recommend starting with the skelton frame.)
1x right frame
1x barrel (choose a barrel. there are several variants including 125mm barrels or 75mm barrels)
1x left grip (there are several grip variants included)
1x right grip
1x hammer arm
1x hammer head
1x hammer spring inner
1x hammer spring outer
1x hand
1x latch_L
1x latch_R
1x rachet
1x rachet_arm_stop
1x sear (if the regular sear does not function correctly for you, there are several others provided in the Experimental_parts folder"
1x trigger
4x(or more) ammo shells (choose betwwen all-plastic ammo shells or ammo designed with an anvil insert made from metal tubing)
3.)screws/nuts/washers:
4x m2 washers
7x m2 nuts
hex socket head cap screws:
4x m2x10mm (FOR THE FIRING PIN, I HIGHLY RECOMMEND USING A 8MM SCREW, BUT A 9MM OR 10MM SCREW WILL ALSO WORK. THE SHORTER SCREW GIVES MORE CONSITENT FIRING PIN POSITIONING)
6x m2x15mm or 16mm
4x m2x20mm
3x m2x5mm
4.) springs:
3 springs are required. I used the "Everbilt Spring Assortment Kit (84-Pack)" from my local Home Depot, but similar metric and imperial springs should be easy to source elsewhere and should work fine.
hammer spring: (diameter=11/32in, length=1in , wire diameter=~0.5in) OR (diameter=8mm, length=25mm, wire diameter=~1mm)
trigger spring: (diameter=11/64in, length=1.5in, wire diameter=~0.2in) OR (diameter=4mm, length=35mm, wire diameter=~0.5mm)
barrel latch spring: (diameter=11/64in, length=5/8in, wire diameter=~0.01in) OR (diameter=4mm to 6mm, length=15mm, wire diameter=~0.3mm)
5.) rubber/elastic bands:
I got my rubber bands out of a small assortment pack from my local office supply store.
1x rubber band cross section: ~(1.5mm x 1mm) unstretched/uncut length: ~85mm
1x rubber band cross section: ~(3mm x 1mm) unstretched/uncut length: ~65mm
6.) The ammo requires caps! I like "star caps" plastic strip caps because they are easy to find and cheap, but pretty much any other plastic caps should work just fine.
7.) optional but recommended:
3.5mm OD x ~1.5mm ID metal tube (brass or stainless steel or any other metal should work fine) cut into ~10mm lengths. This is for making more durable ammo for the toy. The all-plastic ammo's durability relies heavily on the imact strength and layer adhesion of the filament used. Using metal tubing for the anvil will help the ammo shells last a lot longer. The only source i could find for this diameter of tubing was "uxcell 3.5mm OD 1mm wall thickness brass tube" on aliexpress. It may be possible to use 4mm OD tubing instead, but i personally havent tested that(I ordered 4mm tubing several months ago but it never arrived). There's an STL for 4mm tubing ammo in the Experimental_parts folder.
Superglue is helpful for securing the metal anvils in the plastic ammo shells, securing orange tips to the barrels of the toy, or if you need to repair any damaged printed parts.
White lithium grease is very useful for lubricationg moving parts.
3D PRINTING SETTINGS
Models are optimized for a 0.4mm nozzle, 0.4mm line width. and 0.2mm layer height. Supports are required and should be set to "everywhere" in your slicer. Use a support roof. I recommend a support roof of 0.4mm thickness at 90 to 100% density. Cura's support settings "fan speed override" and "supported skin fan speed are useful for getting easier to remove supports. PLA and PETG should work fine in all parts of the model. I used a wall thickness of 1.2mm and a infill percentage of 20% for most parts. I recommend printing the sears with a wall thickness of 3mm so they are more durable. Parts should import into your slicer in the correct orientation! I don't recommend any other print orientations. Z-seam location should be set to inside corners. For cylindrical parts like the ammo and the barrel, i recommend aligning the seam for better surface finish.
Similar models
thingiverse
free
Bowden Remote Control for Models and Toys
... a handle for the steering wheel. you can fasten the steering head to the steering wheel of your steam roller using rubber bands.
thingiverse
free
Easy PTFE 4mm by Krilov
... tool both drill and trim on a 4mm ptfe tube.
you need:
2x m3 screw 12mm
2x m3 nut
1x m2 screw 12mm
1x m2 nut
1x 18mm razor knife
grabcad
free
Toy Ammo Can
...toy ammo can
grabcad
a toy "ammo" can for nerf darts. for the assembly i used thick 2,8mm wire.
thingiverse
free
78mm Ducts for Donut FPV Cinewhoop Frame
...m2 screw (4mm length)
print settings i used:
in-fill @ 100%
print speed @ 7.5mm/s
travel speed @ 35mm/s
retraction length @ 2.5mm
thingiverse
free
Oculus Quest Boneworks cap (2 parts for smaller printers) by pizzacat1732
...p (2 parts for smaller printers) by pizzacat1732
thingiverse
use 3 4mm diameter, 40mm length screws or pins to connect the parts
thingiverse
free
Starting pistol for 9x19 shell (with primer only ) by michalow204
...g pin
4x rubber band
1x springs to the trigger
parts may require grinding to fit.
glue the barrel with the body or use metal pins
thingiverse
free
18500 LiFePO4 battery holder
...d cap screw (shcs)
1x 3mm nut
1x 4mm x 8mm shcs
1x 4mm nut
1x spring 4mm id (cut short, will provided parts for 2 holders
thingiverse
free
4mm (1.75 filament) PTFE fitting for Titan Extruder by Elitail
...have some geometry problems and ptfe tube will not fit, just use 4mm drill bit.
for "screw" part supports are required.
thingiverse
free
Bowden Extruder with Filament Guide for Anet A6 A8 Nema 17 Extruder Motors by racer_asl
...tting for the upper part with 5mm thread (optional)
the integrated hinge for the cover is mounted with a piece of 1.75mm filament
thingiverse
free
Rubber Band Powered Toy Cannon by unistrut
... hammer, make sure the rubber band on the sear is pulling it into position and not getting caught up in the rest of the workings.
Derringer
turbosquid
$5
derringer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$10
Derringer Philadelphia
...royalty free 3d model derringer philadelphia for download as on turbosquid: 3d models for games, architecture, videos. (1622641)
humster3d
$50
3D model of COP .357 Derringer
... detailed 3d model of cop .357 derringer in various file formats. all our 3d models were created maximally close to the original.
humster3d
$50
3D model of Remington 1866 Derringer
...led 3d model of remington 1866 derringer in various file formats. all our 3d models were created maximally close to the original.
turbosquid
$4
Remington Model 95 Derringer
... free 3d model remington model 95 for download as obj and fbx on turbosquid: 3d models for games, architecture, videos. (1701106)
3d_export
free
Download free REPRRINGER 3d printable gun 3D Model
...download free reprringer 3d printable gun 3d model 3dexport derringer pepperbox gun pistol firearm reprringer printable 3d print reprringer...
3d_export
free
Download free REPRRINGER v2 PENTAGUN 3d printable gun 3D Model
...reprringer v2 pentagun 3d printable gun 3d model 3dexport derringer pepperbox gun pistol firearm reprringer pentagun printable 3d print...
3d_export
free
Download free REPRRINGER v3 HEXEN 3d printable gun 3D Model
...reprringer v3 hexen 3d printable gun 3d model 3dexport derringer pepperbox gun pistol firearm reprringer hexen printable 3d print...
sketchfab
$30
Derringer 22
...22
sketchfab
derringer old-west-22-cal-blank-firing-derringer - derringer 22 - buy royalty free 3d model by krunal (@krunal999)
thingiverse
free
DERRINGER 1800 by EmreTufanoglu
...derringer 1800 by emretufanoglu
thingiverse
model gun
Barrel
3d_ocean
$4
Barrel
...barrel
3docean
low poly medi evil barrel wood barrel
barrel, wood barrel, low poly,
3d_ocean
$12
Barrel
...barrel
3docean
barrel barrique drink oak barrel vine wood
a new barrel
3d_ocean
$3
Barrel
...barrel
3docean
barrel furniture
a high quality barrel .
3d_ocean
$4
Barrel
...barrel
3docean
barrel
a lowpoly barrel which is ready to use .
3d_export
$10
barrel
...barrel
3dexport
barrel
3d_export
$5
barrel
...barrel
3dexport
barrel
3d_export
$8
barrel
...barrel
3dexport
lolipop barrel
3d_export
$5
barrel
...barrel
3dexport
!!!radioactive barrel!!!
3d_export
free
barrel
...barrel
3dexport
old barrel
3d_export
$5
Barrel
...barrel
3dexport
high wooden barrel. reconstruction of medieval scandinavian barrel (viking age).
Cap
3ddd
$1
cap
...cap
3ddd
cap
cap
3d_export
$10
cap
...cap
3dexport
cap
archibase_planet
free
Cap
...cap
archibase planet
cloth cap clothes clothing
cap - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3ddd
free
Cap
...cap
3ddd
cap , кепка. бейсболка
реалистичная кепка
archibase_planet
free
Cap
...cap
archibase planet
cap water-closet lid sanitary ware
cap 880961 - 3d model for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
cap sanitary ware water-closet lid
cap 991861 - 3d model for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
cloth cap head-dress hat
cap n110708 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
wc cap water-closet lid
wc cap p5114 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Cap
...cap
archibase planet
wc cap water-closet lid
wc cap r3901 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Capping
...
archibase planet
chimney capping flue smoke-stack
chimney capping n020108- 3d model (*.gsm+*.3ds) for interior 3d visualization.
Toy
3d_export
$5
toys
...toys
3dexport
toys
archibase_planet
free
Toy
...toy
archibase planet
giraffe toy toy giraffe
toy giraffe n041010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
elephant toy toy plaything
toy elephant n131010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
toy deer
toy n061011 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
nutcracker toy
toy n070111 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
toy nutcracker
toy n190811 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
toy snake serpent
toy n181112 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
toy elephant
toy elephant n040112 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
toy hare
toy a hare n311210 - 3d model (*.3ds) for interior 3d visualization.
archibase_planet
free
Toy
...toy
archibase planet
toy rabbit
toy s n150412 - 3d model (*.3ds) for interior 3d visualization.
Gun
archibase_planet
free
Gun
...t
gun tommy gun thompson gun thompson submachine gun
gun thompson n120313 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun machine-gun submachine gun
gun m4a1 n260713 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
archibase_planet
free
Gun
...base planet
gun submachine gun sub-machine-gun
gun fn scar mark16 n091210 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun rifle hand-gun
gun n221010 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun automatic machine machine gun
gun p90 n020515 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun automatic rifle submachine-gun
gun m4 n221112 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
gun m16 machine gun
gun m16 n030613 - 3d model (*.gsm+*.3ds+*.max) for interior 3d visualization.
archibase_planet
free
Gun
...gun
archibase planet
machine-gun gun fire-arms shooter
gun n270211 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Gun
...hibase planet
gun automatic machine machine gun
gun jackhammer mk3a1 n290415 - 3d model (*.gsm+*.3ds+*.max) for 3d visualization.
archibase_planet
free
Gun
...n
archibase planet
paintball gun gun paintball
gun paintball bt 4 renta n280611 - 3d model (*.3ds) for interior 3d visualization.
4
turbosquid
$9
Office Chair 4-4
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$5
doors- 4
...doors- 4
3dexport
doors 4
3d_export
$5
hinge 4
...hinge 4
3dexport
hinge 4
3ddd
$1
Штора №4
...штора №4
3ddd
штора №4
3d_export
free
playstation 4
...playstation 4
3dexport
playstation 4
turbosquid
$1
re 4-4 electric locomotive
... free 3d model re 4 4 electric locomotive for download as obj on turbosquid: 3d models for games, architecture, videos. (1707845)
3ddd
$1
nexus 4
...nexus 4
3ddd
lg , телефон
nexus 4
3ddd
$1
4 Poufs
...4 poufs
3ddd
пуф
4 soft poufs
turbosquid
$12
Calligraphic Digit 4 Number 4
...hic digit 4 number 4 for download as max, obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1389332)
3ddd
$1
Dauphin 4+
...dauphin 4+
3ddd
кресло
dauphin 4+ конференц кресло
Prints
design_connected
$27
...print
designconnected
moroso print computer generated 3d model. designed by wanders, marcel.
3ddd
free
Eichholtz Prints
...- eichholtz print central station i
13 - eichholtz print central station ii
14 - eichholtz print marisa
15 - eichholtz print tish
3ddd
$1
Eichholtz Prints
...print abstract - set of 2
10 - eichholtz print orange abstract
11 - eichholtz print buddha right
12 - eichholtz print buddha left
turbosquid
$1
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
free
Eichholtz Prints
...of 4
2 - print dunbar 2 set of 4
3 - print guadeloupe 1 set of 4
4 - print guadeloupe 2 set of 4
5 - print giles
6 - print trett
3ddd
$1
Eichholtz Prints
...nt tutti frutti
3 - eichholtz prints watson - set of 2
4 - eichholtz prints antique nautilus - set of 2
5 - eichholtz print tiara
3d_export
$5
Monster for printing
...monster for printing
3dexport
monster 3d model printing
3ddd
free
printed rug
...printed rug
3ddd
ковер
very creative printed rug
3ddd
free
Eichholtz Prints
...иал: бумага
габариты (вхш): 72 x 62 см
описание: print sweetmeat - постер в деревянной раме.
3 - prints varsity set of 2
арти
3ddd
free
Art Print Posters
...print posters 3ddd прованс art print posters by patrician prints ...