3Dtje Improved Y axis (endstop-hole fix) by fiveseven808

Last crawled date: 3 years ago

The included Y axis for the 3Dtje has some holes for the Y axis endstop, with what I assume to be M3 screws. Unfortunately the tolerances for this model are too large, and my printer can print a bit more accurately in X and Y than the model itself expects.
Since there is no space for nuts, I assume this was meant to self tap screws into the Y axis, which is fine by me, however my M3 screws fit super loosely and this is impossible with the stock model.
I've gone and sized the holes down to 3mm so hopefully they can fit M3 screws a bit better. You may or may not have to drill or tap them, but that's a lot better than trying to fill in the hole with something in my opinion (or glue it together)
Enjoy!