3D printable RC airplane. by Kiril_Lange

Last crawled date: 3 years ago

I created this fully 3d printed airplane just to make something cool. With a 36 inch wingspan, 4 servos, and a 210w motor this is a fully functional flying airplane.
Parts:
4 - 25mm x 3mm or 1 inch #4-40 machine screws + respective bolts
4 - 40mm x 6mm or 1.5 inch x 1/4 inch bolts
8 - 6mm or 1/4 inch washers
4 - 10mm x 4mm or 1/2 inch x #6 machine screws + respective bolts
4 - 1/8 inch x 3/8 inch x 2 foot basswood or (untested) 1/8 inch x 1/4 inch x 2 foot basswood
piano wire or paperclips
rubber bands
glue (abs + acetone recommended for an abs print)
sandpaper
RC parts:
I used:
1 - TURNIGY Plush 30amp Speed Controller
1 - D2830-11 1000kv Brushless Motor
1 - ZIPPY Compact 2200mAh 3S 25C Lipo Pack
4 - Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo
As well as a battery charger and 4 channel transmitter/reciever
.
As a poor college student, if you are viewing this and work for a cool company i would love to hear from you about any possible employment. :)