36" Spin Reel Mounts

Last crawled date: 4 years, 2 months ago

These brackets are for mounting Gilbert Engineering's 36" Spin Reel using 1/2" PVC.
They are modeled after Doug Reel's (https://www.thingiverse.com/reelpilot) excellent mounts for the larger Spin Reel and Rosa Wreath.
The outer brackets have oblong holes so they can be used on all four sides. Similarly, the inner brackets can be positioned as needed to avoid pixels.
The tops of the brackets have recesses for the screws to prevent the screw heads from damaging your siding.
You'll need to drill zip tie holes based on where you locate the brackets.
If you prefer to use EMT, Doug created some bushings to down-size the holes, which you can download here: https://www.thingiverse.com/download:7096116
Note - the spacing of pixels vary around the outside of the spin reel. I am using the side with three pixels (vs. four) between the lines from the center as the top and bottom, with the fold line vertical.