Thingiverse
36" LED Mega-sphere by tygunn
by Thingiverse
Last crawled date: 3 years, 1 month ago
Printed with: Prusa MK3S+, eSun PETG, 0.20mm SPEED profile
The clamps and supports are printed with 20% infill, with supports for the hex nut indents; they got a bit mucky without it
2 x sphere mounts -36in - top half (177g, 14hr for one)
2 x sphere mounts -36in - bottom half: (267g, 18hr for one)
4 x sphere mounts -36in - clamp: (10g, 54min for one)
A single rib of the sphere has 23 standard bullet pixels on it and requires:
5 x pixel clips - 36in - four pixels
1 x pixel clips - 36in - three pixels
1 x 72" long 1/4" steel rod, cut to 53 1/4" long; 18 3/4" off cut is left, keep this for a 12" sphere. I bought these in 304 stainless from Online Metals.com; it is probably cheaper to get them locally. Arc the 1/4" steel rod using a ring roller (Harbor freight one does just fine); arc to 36" diameter.
Print these in the shown orientation with NO supports and with a brim (otherwise they won't adhere well).
Filament for a rib is 159g, 17hr print time
Print 32 ribs.
Assembly of hubs:
One of the clamps is secured to the bottom half piece using machine screws and hex nuts.
As shown in "clamp orientation", #6 machine screws and nuts can be used to secure the top and bottom pieces together (if desired) for extra clamping strength along the center.
The hub slips on to a 3/4" EMT conduit and #6 machine screws and nuts are used to secure a clamp piece to hold the hub in place on the EMT conduit.
Keep all the outer machine screws as loose as possible so that you can easily slip the arcs in both ends. Once they're all in tighten all the machine screws snug so that the arcs are clamped in securely.
The clamps and supports are printed with 20% infill, with supports for the hex nut indents; they got a bit mucky without it
2 x sphere mounts -36in - top half (177g, 14hr for one)
2 x sphere mounts -36in - bottom half: (267g, 18hr for one)
4 x sphere mounts -36in - clamp: (10g, 54min for one)
A single rib of the sphere has 23 standard bullet pixels on it and requires:
5 x pixel clips - 36in - four pixels
1 x pixel clips - 36in - three pixels
1 x 72" long 1/4" steel rod, cut to 53 1/4" long; 18 3/4" off cut is left, keep this for a 12" sphere. I bought these in 304 stainless from Online Metals.com; it is probably cheaper to get them locally. Arc the 1/4" steel rod using a ring roller (Harbor freight one does just fine); arc to 36" diameter.
Print these in the shown orientation with NO supports and with a brim (otherwise they won't adhere well).
Filament for a rib is 159g, 17hr print time
Print 32 ribs.
Assembly of hubs:
One of the clamps is secured to the bottom half piece using machine screws and hex nuts.
As shown in "clamp orientation", #6 machine screws and nuts can be used to secure the top and bottom pieces together (if desired) for extra clamping strength along the center.
The hub slips on to a 3/4" EMT conduit and #6 machine screws and nuts are used to secure a clamp piece to hold the hub in place on the EMT conduit.
Keep all the outer machine screws as loose as possible so that you can easily slip the arcs in both ends. Once they're all in tighten all the machine screws snug so that the arcs are clamped in securely.
Similar models
thingiverse
free
Light/Medium Duty Wood Clamps for 1/2" EMT
...ecommended to be printed out of tpu or flexible filament. this will need to be heated and pressed over the 3/8" nut capture.
thingiverse
free
EMT End Stop Holder by bgllvr
...es.
i had one crack on me yesterday during a homing. i printed out a new one with 50% infill and figured i would update it here.
thingiverse
free
Mini tree Star Topper Mount by tygunn
...n
thingiverse
clamp mount for 3/4" conduit to mount a mini tree star. holes are printed for a 1/4" machine screw tap.
thingiverse
free
3/4" conduit clamp by Darklotus
...s just a simple light duty 3/4" emt conduit clamp. m3x15 screws work well, will need to use longer if using nylon lock nuts.
thingiverse
free
3/4" Conduit Clamp - "F" Style by MStence
...like the other end. they both seem to have similar holding strength. the latch version of the live end...
thingiverse
free
Electrical conduit webcam mount by JasonDentler
...work.get a 1/4" 20 tpi screw at your local box store...
the screw hole for the clamping part is sized for a very tight #10.
thingiverse
free
Power Supply Mount for MPCNC by xyz100
...nuts.
the clamp (not the mount itself) can be printed on the side as well i think. the ones in the pictures were printed in cura.
thingiverse
free
HP Server Power Supply Mount by tygunn
...rinted to be tapped using a 1/4" tap. use 1/4" machine screws to tighten the top clamp onto the bottom mounting plate.
thingiverse
free
Bracket - 2" pipe to 1" IMT Conduit by teamwija
...ly attach a 1" imt conduit to a 2" pipe with a 1" standoff. has nut traps and boltholes for 1/4-20 nuts and bolts.
thingiverse
free
Pixel Pole clamp for 4 strips 3/4 emt
...sed off of the boscoyo clamp of the same use, i just wanted 4 strips instead of 6, and i wanted them to cover about 180 degrees.
Tygunn
thingiverse
free
Handle for M3 3mm Tap by tygunn
...handle for m3 3mm tap by tygunn
thingiverse
a simple tap handle for an irwin 3mm m3 tap.
thingiverse
free
F48 Mounting Plate by tygunn
...48 pixel controller.
has supports under the board at various places to minimize board flex when pressing in rj45 connectors, etc.
thingiverse
free
Enclosure vent by tygunn
...mple nut to tighten the vent to the enclosure.
"ventnutwithfanmount.stl" has four holes spaced for mounting a 60mm fan.
thingiverse
free
Unibuiti Flex Mini Mount with Side Tabs by tygunn
...side tabs by tygunn
thingiverse
this is a derivation of an existing thing with side tabs added for mounting with heavier screws.
thingiverse
free
3M Respirator port cap by tygunn
...orts on a 3m respirator.
useful as part of a papr project where you're using only one of the ports to push air into the mask.
thingiverse
free
3M Respirator to CPAP Swivel Adapter by tygunn
...r which attaches a cpap hose to a standard 3m respirator with a bayonet style connector.
this can be used as part of a papr mask.
thingiverse
free
Mini tree Star Topper Mount by tygunn
...n
thingiverse
clamp mount for 3/4" conduit to mount a mini tree star. holes are printed for a 1/4" machine screw tap.
thingiverse
free
Falcon Differential Receiver Mounting Plate by tygunn
...en how oddly placed the mounting holes are.
the holes in the mounting pegs are suitable for tapping with an m3 (3.0m) metric tap.
thingiverse
free
12" LED Sphere pixel Clip by tygunn
...2" diameter sphere constructed from 1/8" diameter steel rods.
i'll post the full build once i get it all dialed in.
thingiverse
free
Mean Well RS-50-5 Power Supply Mount by tygunn
...nt by tygunn
thingiverse
a mount for the mean well rs-50-5 power supply.
i suspect this is a ripoff meanwell power supply. lol.
Mega
3ddd
$1
BoConcept / Mega
...boconcept / mega
3ddd
boconcept
boconcept mega
3ddd
free
Angelo - Mega shoin
... mega shoin , shoin
angelo - mega shoin - 3dmax 2008
3ddd
$1
Комод MEGA
...вана по фото с учетом реальных размеров.
стек не сколапсен, есть возможность регулировки уровня сглаживания.
текстуры в архиве.
3ddd
$1
Hulsta / Mega-design
...hulsta / mega-design
3ddd
hulsta
hulsta mega-design
design_connected
$18
Tolomeo Mega
...
photo-realistic 3d models of the tolomeo mega floor lamps from artemide for 3d architectural and interior design presentations.
turbosquid
$119
Mega Soldier
... free 3d model mega soldier for download as obj, c4d, and fbx on turbosquid: 3d models for games, architecture, videos. (1148568)
turbosquid
$100
Mega Yacht
... free 3d model mega yacht for download as obj, fbx, and blend on turbosquid: 3d models for games, architecture, videos. (1368903)
3ddd
$1
Massproductions Mega
... massproductions , mega
ширина: 180 см
глубина: 90 см
высота: 79 см
3d_export
$4
mega metro station
...mega metro station
3dexport
mega metro station. ready to game. thanks all downloaders!!
3ddd
$1
BAS Mega
...bas mega
3ddd
bas , ванна
ванна
Sphere
3ddd
$1
sphere
...sphere
3ddd
sphere for interior
archibase_planet
free
Spheres
...spheres
archibase planet
balls spheres
spheres - 3d model (*.gsm+*.3ds) for interior 3d visualization.
archibase_planet
free
Sphere
...sphere
archibase planet
globe sphere
sphere n151009 - 3d model (*.gsm+*.3ds) for interior 3d visualization.
3d_export
$5
sphere
...sphere
3dexport
sfgsrybsrtfsz
turbosquid
$1
Sphere
...
turbosquid
royalty free 3d model sphere for download as max on turbosquid: 3d models for games, architecture, videos. (1235365)
3d_export
$5
pendant sphere
...pendant sphere
3dexport
pendant sphere
3d_export
$5
pendant sphere
...pendant sphere
3dexport
pendant sphere
3d_export
$5
pendant sphere
...pendant sphere
3dexport
pendant sphere
3d_export
$5
pendant sphere
...pendant sphere
3dexport
pendant sphere
3d_export
$5
pendant sphere
...pendant sphere
3dexport
pendant sphere
36
design_connected
$18
36 h
...36 h
designconnected
driade 36 h computer generated 3d model. designed by novembre, fabio.
3ddd
free
Bed 36
...bed 36
3ddd
постельное белье
bed 36. i hope you like it. thank you!
design_connected
$16
Pilke 36
...pilke 36
designconnected
showroom finland pilke 36 computer generated 3d model. designed by halonen, tuukka.
turbosquid
$41
Roofing system - 36' x 36'_cob
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$13
building 36
...osquid
royalty free 3d model building 36 for download as max on turbosquid: 3d models for games, architecture, videos. (1362699)
turbosquid
$6
Bedcloth 36
...osquid
royalty free 3d model bedcloth 36 for download as max on turbosquid: 3d models for games, architecture, videos. (1522752)
turbosquid
$188
Pak 36
...squid
royalty free 3d model pak 36 3d model for download as on turbosquid: 3d models for games, architecture, videos. (1685002)
turbosquid
$12
Curtain 36
...
royalty free 3d model curtain 36 for download as max and obj on turbosquid: 3d models for games, architecture, videos. (1591751)
3ddd
$1
DT-36
...dt-36
3ddd
карниз
карниз
turbosquid
$23
Sofa 36
...yalty free 3d model sofa 36 for download as max, obj, and fbx on turbosquid: 3d models for games, architecture, videos. (1503056)
Led
3d_export
$5
led
...led
3dexport
the led is cut with all the parts.
3ddd
$1
Monacor / PARL56DMX / LED-320RGBW / LED-345RGBW / LED-300RGB
... прожектор
http://www.monacor.dk/
parl56dmx
led-320rgbw
led-345rgbw
led-300rgb
turbosquid
$10
LED
...led
turbosquid
free 3d model led for download as blend on turbosquid: 3d models for games, architecture, videos. (1691856)
3d_export
$5
led lamp
...led lamp
3dexport
led lamp, brightness animation
3ddd
free
leds-c4
...leds-c4
3ddd
leds-c4
современный торшер
3ddd
free
leds-c4
...leds-c4
3ddd
leds-c4
настольный лампа
turbosquid
$19
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
$12
Led
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
turbosquid
free
LED
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.