Thingiverse
250V outlet cap by nagmay
by Thingiverse
Last crawled date: 4 years, 5 months ago
I have a bunch of 250V outlets in my shop. Since the shop is used for metal work, the outlets can get caked with metal dust. Hasn't caused any problems yet, but I thought having a simple cover would be nice.
These are not specific to the plug configuration (which are different based on amps). They simply slip over the extruding round outlet (with a diameter of about 54mm).
250V is also referred to as 220V, 230V, 240V...
This should be considered a dust cap and is not intended for child safety.
Logo vs blank?
I added the "high voltage" logo to the bottom using tiny gaps. Your slicer should follow these when filling it in - leaving a subtile image of the logo. However, you will probably need a flat and smooth bed to make it legible. Or... just print out the blank one.
These are not specific to the plug configuration (which are different based on amps). They simply slip over the extruding round outlet (with a diameter of about 54mm).
250V is also referred to as 220V, 230V, 240V...
This should be considered a dust cap and is not intended for child safety.
Logo vs blank?
I added the "high voltage" logo to the bottom using tiny gaps. Your slicer should follow these when filling it in - leaving a subtile image of the logo. However, you will probably need a flat and smooth bed to make it legible. Or... just print out the blank one.