Thingiverse
250 pod-racer by shawdreamer
by Thingiverse
Last crawled date: 3 years, 1 month ago
this design places all delicate electronics inside the frames enclosed interior
top plate - FC (mounting holes for all common sized FC (naze, KK2 etc),battery strap points for 3s/4s battery
middle enclosure - space for 4x Esc & pdb or 4in1 esc (Qbrains etc)
Lower plate - space for Receiver(side plug versions only), Vtx, simpleOSD/MinimOSD, Battery alarm (visual holes in bottom for http://www.ebay.co.uk/itm/New-Airsoft-Low-Voltage-Buzzer-For-2s-3s-Lipo-Battery-Alarm-UK-/262316042074?hash=item3d1341275a:g:vxsAAOSwEeFVOLI5), balance plug extension required
front mounting point for standard 600-700 Sony Tvl cam (tilted 25°)
rear mounting point for XT60 plug and VTX aerial connection (will require a small extension cable).
motor mount holes for common 250 race sized motors (1806's etc)
prop size max - 5"
3s battery max - 2200mah
4s battery max - 1400mah
hardware required -
10x m2x20 bolts
10x m2x10 bolts
balance plug extension (15-20cm)
vtx aerial extention cable (10cm)
update (29/07/2016)
details:-
frame size - exactly 250 (c/c motor)
motor size - 22mm-27mm
prop size - 4"-5"
frame weight - 190g (fully assembled frame only)
tested config:-
CC3d Nano
emax MT1806 2280kv
emax simon series 12a esc
5045 "indestructable" props
1000Tvl ir-cut cam
boscam ts353 tvx
Turnigy 1400Mah 4s
538g (fully assembled weight)
Results:-
stable on stock PID settings
stable acro characteristics
7mins heavy flight time
10mins light flight time
additional (04/08/2016):
Id like to apologise to anyone who has downloaded this design previous to this date and has encountered printing issues with the upper plate, somewhere between downloading it to my computer and uploading it to thingiverse the file had suffered corruption which was causing print errors, the problem has only just came to my attention and I have uploaded a fresh copy of the upper plate that I have test printed to confirm it is error free.
again I'm sorry I didn't catch this earlier.
additional (04/01/2017)
redesigned and re-tweeked all parts to accommodate the use of 3mm hex head bolts (easier to fit and stronger all-round)
changed topmost cover to accommodate a 1s battery (500mah max hubsan type/shape)
added adjustable angle mounting design for Eachine TX01/02/03 AIO fpv cam (runs off a single 1s lightweight battery)
added addition cable wiring access holes to better accommodate wiring through the frame levels without weakening overall structure.
addition of TX02 AIO has multiple benefits, along with the excellent signal strength,range and penetration of the TX02 there is the added side effect of weight reduction, with the AIO theres no need for additional Ubec,VTX,Antenna and wiring which dropped 50g immediately off the fully built frame with battery/RTF (RTF weight with original fpv gear - 548g, RTF weight with AIO and 1s battery - 497g), in addition to that there's less draw from flight battery so slight improvement to thrust and flight times
top plate - FC (mounting holes for all common sized FC (naze, KK2 etc),battery strap points for 3s/4s battery
middle enclosure - space for 4x Esc & pdb or 4in1 esc (Qbrains etc)
Lower plate - space for Receiver(side plug versions only), Vtx, simpleOSD/MinimOSD, Battery alarm (visual holes in bottom for http://www.ebay.co.uk/itm/New-Airsoft-Low-Voltage-Buzzer-For-2s-3s-Lipo-Battery-Alarm-UK-/262316042074?hash=item3d1341275a:g:vxsAAOSwEeFVOLI5), balance plug extension required
front mounting point for standard 600-700 Sony Tvl cam (tilted 25°)
rear mounting point for XT60 plug and VTX aerial connection (will require a small extension cable).
motor mount holes for common 250 race sized motors (1806's etc)
prop size max - 5"
3s battery max - 2200mah
4s battery max - 1400mah
hardware required -
10x m2x20 bolts
10x m2x10 bolts
balance plug extension (15-20cm)
vtx aerial extention cable (10cm)
update (29/07/2016)
details:-
frame size - exactly 250 (c/c motor)
motor size - 22mm-27mm
prop size - 4"-5"
frame weight - 190g (fully assembled frame only)
tested config:-
CC3d Nano
emax MT1806 2280kv
emax simon series 12a esc
5045 "indestructable" props
1000Tvl ir-cut cam
boscam ts353 tvx
Turnigy 1400Mah 4s
538g (fully assembled weight)
Results:-
stable on stock PID settings
stable acro characteristics
7mins heavy flight time
10mins light flight time
additional (04/08/2016):
Id like to apologise to anyone who has downloaded this design previous to this date and has encountered printing issues with the upper plate, somewhere between downloading it to my computer and uploading it to thingiverse the file had suffered corruption which was causing print errors, the problem has only just came to my attention and I have uploaded a fresh copy of the upper plate that I have test printed to confirm it is error free.
again I'm sorry I didn't catch this earlier.
additional (04/01/2017)
redesigned and re-tweeked all parts to accommodate the use of 3mm hex head bolts (easier to fit and stronger all-round)
changed topmost cover to accommodate a 1s battery (500mah max hubsan type/shape)
added adjustable angle mounting design for Eachine TX01/02/03 AIO fpv cam (runs off a single 1s lightweight battery)
added addition cable wiring access holes to better accommodate wiring through the frame levels without weakening overall structure.
addition of TX02 AIO has multiple benefits, along with the excellent signal strength,range and penetration of the TX02 there is the added side effect of weight reduction, with the AIO theres no need for additional Ubec,VTX,Antenna and wiring which dropped 50g immediately off the fully built frame with battery/RTF (RTF weight with original fpv gear - 548g, RTF weight with AIO and 1s battery - 497g), in addition to that there's less draw from flight battery so slight improvement to thrust and flight times
Similar models
thingiverse
free
Mini spider 250 quadcopter v3 by vpoten
... setup, 12a (or 18a) esc (ultra fast flight):
2207-2100kv or 2208-2000kv motors, 5x45 propellers, 4s 1600 35c battery.
enjoy!
thingiverse
free
Precious X Frame Racer 220 by joaoprecivalli
...tery 3s-4s 1300mah
flight controler cc3d/naze/kiss/spracing
pdb matek 12v-5v
props 5"
fpv 200mw vtx mini
gopro/mobius/runcam
thingiverse
free
X195T by windrides
...infill)
you will also need 5x m3x8mm screws for base plates.
*** x195t-top.stl should be printed with 5 perimeters or 70%+ infill
thingiverse
free
400mm quadcopter frame by hardas999
...emax simonk series 30a
hobbyking kk2.1.5 multi-rotor lcd flight control board
weight ( without battery) - 730g
pla - infill 25%
thingiverse
free
x185s by windrides
...fc/pdb mount (v7)
1806 motors
20a esc
battery: 1000-1400mah 3-4s
weight: 51 grams (pla, 100% infill), 33.2grams (pla, 30% infill)
thingiverse
free
TX02 Camera and 1S battery mount by Impulse819
...es.
just use dual lock velcro on the bottom and double side tape to fix the cam to the mount.
very light and doesnt affect flight
thingiverse
free
Mini spider quadcopter PD2015 by vpoten
... setup, 12a (or 18a) esc (ultra fast flight):
2207-2100kv or 2208-2000kv motors, 5x45 propellers, 4s 1600 35c battery.
enjoy!
thingiverse
free
T185 by windrides
...es08mdii 12g metal gear
tail screw: m3 33mm and m3 nyloc nut
battery: 850-1000mah 3s-4s
frame weight: 58 grams (100% infill, pla)
thingiverse
free
Toad 110 Remix - AIO FPV (Brushed 8.5mm Motors) by wiretap
...degree incline on the lower deck for a cam+vtx similar to the eachine tx02. -- added a slot on...
thingiverse
free
BetaFPV 75mm Flight Controller Adapter by BasslinedRC
...s/frames/products/tks-65mm
also included are the battery holders to mount the betafpv 450mah 1s batteries, best if printed in tpu
Shawdreamer
thingiverse
free
printbed standoff feet by shawdreamer
...printbed standoff feet by shawdreamer
thingiverse
standoffs
thingiverse
free
spool holder (horizontal) by shawdreamer
...spool holder (horizontal) by shawdreamer
thingiverse
spool holder
thingiverse
free
6x3 bullnose prop by shawdreamer
...6x3 bullnose prop by shawdreamer
thingiverse
material - pla
thingiverse
free
standalone heatbed feet by shawdreamer
...standalone heatbed feet by shawdreamer
thingiverse
feet for mk2a/b heatbed
thingiverse
free
Yamato-Class Benchy by shawdreamer
...yamato-class benchy by shawdreamer
thingiverse
benchy got a buff-up
thingiverse
free
U-boat Benchy by shawdreamer
...u-boat benchy by shawdreamer
thingiverse
last in the series of benchy spin-offs.
thingiverse
free
H-copter Canopy by shawdreamer
...h-copter canopy by shawdreamer
thingiverse
lightweight protective canopy for h-copter design
thingiverse
free
Nimitz-class Benchy by shawdreamer
...nimitz-class benchy by shawdreamer
thingiverse
whats better than a battleship benchy?
a aircraft carrier benchy!!
thingiverse
free
thermostatic controller board enclosure (large) by shawdreamer
...thermostatic controller board enclosure (large) by shawdreamer
thingiverse
enclosure
thingiverse
free
printrite z-stop repair by shawdreamer
...printrite z-stop repair by shawdreamer
thingiverse
simple glue on z-stop repair for stated printer
Racer
3ddd
$1
CILEK (Racer)
...cilek (racer)
3ddd
cilek
набор детской мебели cilek (серия racer)http://www.cilek.com/ru/sl-racer
turbosquid
$36
racer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3ddd
$1
Lego Racers
...lego , racers , конструктор
8667 action wheelie
turbosquid
$80
RACER 9
...turbosquid
royalty free 3d model racer 9 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1417297)
turbosquid
$80
RACER 8
...turbosquid
royalty free 3d model racer 8 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1415462)
turbosquid
$80
RACER 7
...turbosquid
royalty free 3d model racer 7 for download as c4d on turbosquid: 3d models for games, architecture, videos. (1417228)
turbosquid
$8
Spacecraft Racer
...d
royalty free 3d model spacecraft racer for download as fbx on turbosquid: 3d models for games, architecture, videos. (1298320)
turbosquid
$20
Pod Racer
...
royalty free 3d model pod racer for download as jpg and fbx on turbosquid: 3d models for games, architecture, videos. (1156525)
turbosquid
$59
Spaceship Racer
...ty free 3d model space craft racer for download as ma and fbx on turbosquid: 3d models for games, architecture, videos. (1408093)
turbosquid
$80
lego Racer
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
Pod
design_connected
$13
Pod
...pod
designconnected
niche modern pod computer generated 3d model. designed by pyles, jeremy.
3d_export
$5
engine pod
...engine pod
3dexport
engine pod
turbosquid
$80
POD
...pod
turbosquid
royalty free 3d model pod for download as 3ds on turbosquid: 3d models for games, architecture, videos. (1234976)
3ddd
$1
Pod 325
...pod 325
3ddd
пуф
pod 325
turbosquid
$4
PODS
...oyalty free 3d model pods for download as blend, fbx, and obj on turbosquid: 3d models for games, architecture, videos. (1563118)
3d_export
$5
coworking pods
...coworking pods
3dexport
private pods for workspaces, offices
3ddd
$1
Pod Meeting
...pod meeting
3ddd
pod meeting , martela
146cm x 205cm
design_connected
$16
Pod 325
...pod 325
designconnected
department pod 325 computer generated 3d model.
3d_ocean
$5
Ariel Power Pod
...model ariel power pod ariel power pod, modeled in cinema 4d r14 and all materials are included. if you like it, please rate this
3ddd
$1
POD 325
...pod 325
3ddd
кресло мешок
кресло мешок pod 325, room 21 85x50x100cm.
250
design_connected
$27
Arch 250
...arch 250
designconnected
mdf italia arch 250 computer generated 3d model. designed by massaud, jean-marie.
3d_export
$5
ferrari 250 california
...ferrari 250 california
3dexport
1957 ferrari 250 california
turbosquid
free
FAB 250
... available on turbo squid, the world's leading provider of digital 3d models for visualization, films, television, and games.
3d_export
$10
Ferrari 250 Testa Rossa 250 1957
... the front suspension is made and there is an engine under the hood. sculpting and textures were used in the study of the chairs.
design_connected
$29
Amouage Sofa 250
...amouage sofa 250
designconnected
busnelli amouage sofa 250 computer generated 3d model. designed by lagravinese, castello.
design_connected
$27
John-John 250
...john-john 250
designconnected
john-john 250 computer generated 3d model. designed by massaud, jean-marie.
design_connected
$22
Airport Sofa 250
...airport sofa 250
designconnected
poliform airport sofa 250 computer generated 3d model. designed by navone, paola.
3d_export
$20
ferrari 250 gto 1962
...ferrari 250 gto 1962
3dexport
ferrari 250 gto 1962
3d_export
$20
ferrari 250 gt california
...ferrari 250 gt california
3dexport
ferrari 250 gt california
turbosquid
$1
Female 250, scan
...can
turbosquid
royalty free 3d model 250 for download as obj on turbosquid: 3d models for games, architecture, videos. (1242260)